Peptide-Mediated Liposome Fusion: The Effect of Anchor Positioning

Lipid-Based Nanoparticle Functionalization with Coiled-Coil Peptides for In Vitro and In Vivo Drug Delivery

For the delivery of drugs, different nanosized drug carriers (e.g., liposomes, lipid nanoparticles, and micelles) have been developed in order to treat diseases that afflict society. Frequently, these vehicles are formed by the self-assembly of small molecules to encapsulate the therapeutic cargo of interest. Over decades, nanoparticles have been optimized to make them more efficient and specific to fulfill tailor-made tasks, such as specific cell targeting or enhanced cellular uptake. In recent years, lipid-based nanoparticles in particular have taken center stage; however, off-targeting side effects and poor endosomal escape remain major challenges since therapies require high efficacy and acceptable toxicity.To overcome these issues, many different approaches have been explored to make drug delivery more specific, resulting in reduced side effects, to achieve an optimal therapeutic effect and a lower required dose. The fate of nanoparticles is largely dependent on size, shape, and surface charge. A common approach to designing drug carriers with targeting capability is surface modification. Different approaches to functionalize nanoparticles have been investigated since the attachment of targeting moieties plays a significant role in whether they can later interact with surface-exposed receptors of cells. To this end, various strategies have been used involving different classes of biomolecules, such as small molecules, nucleic acids, antibodies, aptamers, and peptides.Peptides in particular are often used since there are many receptors overexpressed in different specific cell types. Furthermore, peptides can be produced and modified at a low cost, enabling high therapeutic screening. Cell-penetrating peptides (CPPs) and cell-targeting peptides (CTPs) are frequently used for this purpose. Less studied in this context are fusogenic coiled-coil peptides. Lipid-based nanoparticles functionalized with these peptides are able to avoid the endolysosomal pathway; instead such particles can be taken up by membrane fusion, resulting in increased delivery of payload. Furthermore, they can be used for targeting cells/organs but are not directed at surface-exposed receptors. Instead, they recognize complementary peptide sequences, facilitating their uptake into cells.In this Account, we will discuss peptides as moieties for enhanced cytosolic delivery, targeted uptake, and how they can be attached to lipid-based nanoparticles to alter their properties. We will discuss the properties imparted to the particles by peptides, surface modification approaches, and recent examples showing the power of peptides for in vitro and in vivo drug delivery. The main focus will be on the functionalization of lipid-based nanoparticles by fusogenic coiled-coil peptides, highlighting the relevance of this concept for the development of future therapeutics.

On the role of membrane embedding, protein rigidity and transmembrane length in lipid membrane fusion

The fusion of biological membranes is ubiquitous in natural processes like exo- and endocytosis, intracellular trafficking and viral entry. Membrane fusion is also utilized in artificial biomimetic fusion systems, e.g. for drug delivery. Both the natural and the biomimetic fusion systems rely on a wide range of (artificial) proteins mediating the fusion process. Although the exact mechanisms of these proteins differ, clear analogies in their general behavior can be observed in bringing the membranes in close proximity and mediating the fusion reaction. In our study, we use molecular dynamics simulations with coarse grained models, mimicking the general behavior of fusion proteins (spikes), to systematically examine the effects of specific characteristics of these proteins on the fusion process. The protein characteristics considered are (i) the type of membrane embedding, i.e., either transmembrane or not, (ii) the rigidity, and (iii) the transmembrane domain (TMD) length. The results show essential differences in fusion pathway between monotopic and transmembrane spikes, in which transmembrane spikes seem to inhibit the formation of hemifusion diaphragms, leading to a faster fusion development. Furthermore, we observed that an increased rigidity and a decreased TMD length both proved to contribute to a faster fusion development. Finally, we show that a single spike may suffice to successfully induce a fusion reaction, provided that the spike is sufficiently rigid and attractive. Not only does this shed light on biological fusion of membranes, it also provides clear design rules for artificial membrane fusion systems.

Lipid in Chips: A Brief Review of Liposomes Formation by Microfluidics

Liposomes are ubiquitous tools in biomedical applications, such as drug delivery, membrane science and artificial cell. Micro- and nanofabrication techniques have revolutionized the preparation of liposomes on the microscale. State-of-the-art liposomal formation on microfluidic chips and its associated applications are introduced in this review. We attempt to provide a reference for liposomal researchers by comparing various microfluidic techniques for liposomes formation.

Liposome fusion with orthogonal coiled coil peptides as fusogens: the efficacy of roleplaying peptides

Biological membrane fusion is a highly specific and coordinated process as a multitude of vesicular fusion events proceed simultaneously in a complex environment with minimal off-target delivery. In this study, we develop a liposomal fusion model system with specific recognition using lipidated derivatives of a set of four de novo designed heterodimeric coiled coil (CC) peptide pairs. Content mixing was only obtained between liposomes functionalized with complementary peptides, demonstrating both fusogenic activity of CC peptides and the specificity of this model system. The diverse peptide fusogens revealed important relationships between the fusogenic efficacy and the peptide characteristics. The fusion efficiency increased from 20% to 70% as affinity between complementary peptides decreased, (from K_F ≈ 10⁸ to 10⁴ M⁻¹), and fusion efficiency also increased due to more pronounced asymmetric role-playing of membrane interacting ‘K’ peptides and homodimer-forming ‘E’ peptides. Furthermore, a new and highly fusogenic CC pair (E₃/P1_K) was discovered, providing an orthogonal peptide triad with the fusogenic CC pairs P2_E/P2_K and P3_E/P3_K. This E₃/P1_k pair was revealed, via molecular dynamics simulations, to have a shifted heptad repeat that can accommodate mismatched asparagine residues. These results will have broad implications not only for the fundamental understanding of CC design and how asparagine residues can be accommodated within the hydrophobic core, but also for drug delivery systems by revealing the necessary interplay of efficient peptide fusogens and enabling the targeted delivery of different carrier vesicles at various peptide-functionalized locations.

We developed a liposomal fusion model system with specific recognition using a set of heterodimeric coiled coil peptide pairs. This study unravels important structure–fusogenic efficacy relationships of peptide fusogens.

High-affinity antigen association to cationic liposomes via coiled coil-forming peptides induces a strong antigen-specific CD4+ T-cell response

Liposomes are widely investigated as vaccine delivery systems, but antigen loading efficiency can be low. Moreover, adsorbed antigen may rapidly desorb under physiological conditions. Encapsulation of antigens overcomes the latter problem but results in significant antigen loss during preparation and purification of the liposomes. Here, we propose an alternative attachment method, based on a complementary heterodimeric coiled coil peptide pair pepK and pepE. PepK was conjugated to cholesterol (yielding CPK) and pepE was covalently linked to model antigen OVA323 (yielding pepE-OVA323). CPK was incorporated in the lipid bilayer of cationic liposomes (180 nm in size). Antigen was associated more efficiently to functionalized liposomes (Kd 166 nM) than to cationic liposomes (Kd not detectable). In vivo co-localization of antigen and liposomes was strongly increased upon CPK-functionalization (35% -> 80%). CPK-functionalized liposomes induced 5-fold stronger CD4⁺ T-cell proliferation than non-functionalized liposomes in vitro. Both formulations were able to induce strong CD4⁺ T-cell expansion in mice, but more IFN-y and IL-10 production was observed after immunization with functionalized liposomes. In conclusion, antigen association via coiled coil peptide pair increased co-localization of antigen and liposomes, increased CD4⁺ T-cell proliferation in vitro and induced a stronger CD4⁺ T-cell response in vivo.

Ectodomain Pulling Combines with Fusion Peptide Inserting to Provide Cooperative Fusion for Influenza Virus and HIV

Enveloped viruses include the most dangerous human and animal pathogens, in particular coronavirus, influenza virus, and human immunodeficiency virus (HIV). For these viruses, receptor binding and entry are accomplished by a single viral envelope protein (termed the fusion protein), the structural changes of which trigger the remodeling and merger of the viral and target cellular membranes. The number of fusion proteins required for fusion activity is still under debate, and several studies report this value to range from 1 to 9 for type I fusion proteins. Here, we consider the earliest stage of viral fusion based on the continuum theory of membrane elasticity. We demonstrate that membrane deformations induced by the oblique insertion of amphipathic fusion peptides mediate the lateral interaction of these peptides and drive them to form into a symmetric fusion rosette. The pulling force produced by the structural rearrangements of the fusion protein ectodomains gives additional torque, which deforms the membrane and additionally stabilizes the symmetric fusion rosette, thus allowing a reduction in the number of fusion peptides needed for fusion. These findings can resolve the large range of published cooperativity indices for HIV, influenza, and other type I fusion proteins.

Molecular Simulations of PEGylated Biomolecules, Liposomes, and Nanoparticles for Drug Delivery Applications

Since the first polyethylene glycol (PEG)ylated protein was approved by the FDA in 1990, PEGylation has been successfully applied to develop drug delivery systems through experiments, but these experimental results are not always easy to interpret at the atomic level because of the limited resolution of experimental techniques. To determine the optimal size, structure, and density of PEG for drug delivery, the structure and dynamics of PEGylated drug carriers need to be understood close to the atomic scale, as can be done using molecular dynamics simulations, assuming that these simulations can be validated by successful comparisons to experiments. Starting with the development of all-atom and coarse-grained PEG models in 1990s, PEGylated drug carriers have been widely simulated. In particular, recent advances in computer performance and simulation methodologies have allowed for molecular simulations of large complexes of PEGylated drug carriers interacting with other molecules such as anticancer drugs, plasma proteins, membranes, and receptors, which makes it possible to interpret experimental observations at a nearly atomistic resolution, as well as help in the rational design of drug delivery systems for applications in nanomedicine. Here, simulation studies on the following PEGylated drug topics will be reviewed: proteins and peptides, liposomes, and nanoparticles such as dendrimers and carbon nanotubes.

Elastic deformations mediate interaction of the raft boundary with membrane inclusions leading to their effective lateral sorting

Liquid-ordered lipid domains represent a lateral inhomogeneity in cellular membranes. These domains have elastic and physicochemical properties different from those of the surrounding membrane. In particular, their thickness exceeds that of the disordered membrane. Thus, elastic deformations arise at the domain boundary in order to compensate for the thickness mismatch. In equilibrium, the deformations lead to an incomplete register of monolayer ordered domains: the elastic energy is minimal if domains in opposing monolayers lie on the top of each other, and their boundaries are laterally shifted by about 3 nm. This configuration introduces a region, composed of one ordered and one disordered monolayers, with an intermediate bilayer thickness. Besides, a jump in a local monolayer curvature takes place in this intermediate region, concentrating here most of the elastic stress. This region can participate in a lateral sorting of membrane inclusions by offering them an optimal bilayer thickness and local curvature conditions. In the present study, we consider the sorting of deformable lipid inclusions, undeformable peripheral and deeply incorporated peptide inclusions, and undeformable transmembrane inclusions of different molecular geometry. With rare exceptions, all types of inclusions have an affinity to the ordered domain boundary as compared to the bulk phases. The optimal lateral distribution of inclusions allows relaxing the elastic stress at the boundary of domains.

Controlled Peptide-Mediated Vesicle Fusion Assessed by Simultaneous Dual-Colour Time-Lapsed Fluorescence Microscopy

We have employed a model system, inspired by SNARE proteins, to facilitate membrane fusion between Giant Unilamellar Vesicles (GUVs) and Large Unilamellar Vesicles (LUVs) under physiological conditions. In this system, two synthetic lipopeptide constructs comprising the coiled-coil heterodimer-forming peptides K₄, (KIAALKE)₄, or E₄, (EIAALEK)₄, a PEG spacer of variable length, and a cholesterol moiety to anchor the peptides into the liposome membrane replace the natural SNARE proteins. GUVs are functionalized with one of the lipopeptide constructs and the fusion process is triggered by adding LUVs bearing the complementary lipopeptide. Dual-colour time lapse fluorescence microscopy was used to visualize lipid- and content-mixing. Using conventional confocal microscopy, lipid mixing was observed on the lipid bilayer of individual GUVs. In addition to lipid-mixing, content-mixing assays showed a low efficiency due to clustering of K₄-functionalized LUVs on the GUVs target membranes. We showed that, through the use of the non-ionic surfactant Tween 20, content-mixing between GUVs and LUVs could be improved, meaning this system has the potential to be employed for drug delivery in biological systems.

Interaction of SNARE Mimetic Peptides with Lipid bilayers: Effects of Secondary Structure, Bilayer Composition and Lipid Anchoring

The coiled-coil forming peptides 'K' enriched in lysine and 'E' enriched in glutamic acid have been used as a minimal SNARE mimetic system for membrane fusion. Here we describe atomistic molecular dynamics simulations to characterize the interactions of these peptides with lipid bilayers for two different compositions. For neutral phosphatidylcholine (PC)/phosphatidylethanolamine (PE) bilayers the peptides experience a strong repulsive barrier against adsorption, also observed in potential of mean force (PMF) profiles calculated with umbrella sampling. For peptide K, a minimum of -12 k_BT in the PMF provides an upper bound for the binding free energy whereas no stable membrane bound state could be observed for peptide E. In contrast, the electrostatic interactions with negatively charged phosphatidylglycerol (PG) lipids lead to fast adsorption of both peptides at the head-water interface. Experimental data using fluorescently labeled peptides confirm the stronger binding to PG containing bilayers. Lipid anchors have little effect on the peptide-bilayer interactions or peptide structure, when the peptide also binds to the bilayer in the absence of a lipid anchor. For peptide E, which does not bind to the PC bilayer without a lipid anchor, the presence of such an anchor strengthens the electrostatic interactions between the charged side chains and the zwitterionic head-groups and leads to a stabilization of the peptide's helical fold by the membrane.