Quercitrin Nanocoated Implant Surfaces Reduce Osteoclast Activity In Vitro and In Vivo

Engineering approaches to manipulate osteoclast behavior for bone regeneration

Extensive research has delved into the multifaceted roles of osteoclasts beyond their traditional function in bone resorption in recent years, uncovering their significant influence on bone formation. This shift in understanding has spurred investigations into engineering strategies aimed at leveraging osteoclasts to not only inhibit bone resorption but also facilitate bone regeneration. This review seeks to comprehensively examine the mechanisms by which osteoclasts impact bone metabolism. Additionally, it explores various engineering methodologies, including the modification of bioactive material properties, localized drug delivery, and the introduction of exogenous cells, assessing their potential and mechanisms in aiding bone repair by targeting osteoclasts. Finally, the review proposes current limitations and future routes for manipulating osteoclasts through biological and material cues to facilitate bone repair.

Quercetin in Osteoporosis Treatment: A Comprehensive Review of Its Mechanisms and Therapeutic Potential

PURPOSE OF REVIEW

This review aims to provide a theoretical basis and insights for quercetin's clinical application in the prevention and treatment of osteoporosis (OP), analyzing its roles in bone formation promotion, bone resorption inhibition, anti-inflammation, antioxidant effects, and potential mechanisms.

RECENT FINDINGS

OP, a prevalent bone disorder, is marked by reduced bone mineral density and impaired bone architecture, elevating the risk of fractures in patients. The primary approach to OP management is pharmacotherapy, with quercetin, a phytochemical compound, emerging as a focus of recent interest. This natural flavonoid exerts regulatory effects on bone marrow mesenchymal stem cells, osteoblasts, and osteoclasts and promotes bone health and metabolic equilibrium via anti-inflammatory and antioxidative pathways. Although quercetin has demonstrated significant potential in regulating bone metabolism, there is a need for further high-quality clinical studies focused on medicinal quercetin.

Surface-modified titanium and titanium-based alloys for improved osteogenesis: A critical review

As implantable materials, titanium, and its alloys have garnered enormous interest from researchers for dental and orthopedic procedures. Despite their success in wide clinical applications, titanium, and its alloys fail to stimulate osteogenesis, resulting in poor bonding strength with surrounding bone tissue. Optimizing the surface topology and altered compositions of titanium and titanium-based alloys substantially promotes peri-implant bone regeneration. This review summarizes the utilization and importance of various osteogenesis components loaded onto titanium and its alloys. Further, different surface-modification methods and the release efficacy of loaded substances are emphasized. Finally, we summarize the article with prospects. We believe that further investigation studies must focus on identifying novel loading components, exploring various innovative, optimized surface-modification methods, and developing a sustained-release system on implant surfaces to improve peri-implant bone formation.

Quercitrin Is a Novel Inhibitor of Salmonella enterica Serovar Typhimurium Type III Secretion System

The purpose was to screen type III secretory system (T3SS) inhibitors of Salmonella enterica serovar Typhimurium (S. Typhimurium) from natural compounds. The pharmacological activities and action mechanisms of candidate compounds in vivo and in vitro were systematically studied and analyzed. Using a SipA-β-lactamase fusion reporting system, we found that quercitrin significantly blocked the translocation of SipA into eukaryotic host cells without affecting the growth of bacteria. Adhesion and invasion assay showed that quercitrin inhibited S. Typhimurium invasion into host cells and reduced S. Typhimurium mediated host cell damage. β-galactosidase activity detection and Western blot analysis showed that quercitrin significantly inhibited the expression of SPI-1 genes (hilA and sopA) and effectors (SipA and SipC). The results of animal experiments showed that quercitrin significantly reduced colony colonization and alleviated the cecum pathological injury of the infected mice. Small molecule inhibitor quercitrin directly inhibited the function of T3SS and provided a potential antibiotic alternative against S. Typhimurium infection. Importance: T3SS plays a crucial role in the bacterial invasion and pathogenesis of S. Typhimurium. Compared with conventional antibiotics, small molecules could inhibit the virulence factors represented by S. Typhimurium T3SS. They have less pressure on bacterial vitality and a lower probability of producing drug resistance. Our results provide strong evidence for the development of novel inhibitors against S. Typhimurium infection.

Engineering Interfacial Environment of Epigallocatechin Gallate Coated Titanium for Next-Generation Bioactive Dental Implant Components

In view of endowing the surface of abutments, a component of titanium dental implant systems, with antioxidant and antimicrobial properties, a surface layer coated with epigallocatechin gallate (EGCg), a polyphenol belonging to the class of flavonoids, was built on titanium samples. To modulate interfacial properties, EGCg was linked either directly to the surface, or after populating the surface with terminally linked polyethyleneglycol (PEG) chains, Mw ~1600 Da. The underlying assumption is that fouling-resistant, highly hydrated PEG chains could reduce non-specific bioadhesion and magnify intrinsic EGCg properties. Treated surfaces were investigated by a panel of surface/interfacial sensitive techniques, to provide chemico-physical characterization of the surface layer and its interfacial environment. Results show: (i) successful EGCg coupling for both approaches; (ii) that both approaches endow the Ti surface with the same antioxidant properties; (iii) that PEG-EGCg coated surfaces are more hydrophilic and show a significantly higher (>50%) interaction force with water. Obtained results build up a rationale basis for evaluation of the merits of finely tuning interfacial properties of polyphenols coated surfaces in biological tests.

MRL/MpJ Mice Resist to Age-Related and Long-Term Ovariectomy-Induced Bone Loss: Implications for Bone Regeneration and Repair

Osteoporosis and age-related bone loss increase bone fracture risk and impair bone healing. The need for identifying new factors to prevent or treat bone loss is critical. Previously, we reported that young MRL/MpJ mice have superior bone microarchitecture and biomechanical properties as compared to wild-type (WT) mice. In this study, MRL/MpJ mice were tested for resistance to age-related and long-term ovariectomy-induced bone loss to uncover potential beneficial factors for bone regeneration and repair. Bone tissues collected from 14-month-old MRL/MpJ and C57BL/6J (WT) mice were analyzed using micro-CT, histology, and immunohistochemistry, and serum protein markers were characterized using ELISAs or multiplex assays. Furthermore, 4-month-old MRL/MpJ and WT mice were subjected to ovariectomy (OV) or sham surgery and bone loss was monitored continuously using micro-CT at 1, 2, 4, and 6 months (M) after surgery with histology and immunohistochemistry performed at 6 M post-surgery. Sera were collected for biomarker detection using ELISA and multiplex assays at 6 M after surgery. Our results indicated that MRL/MpJ mice maintained better bone microarchitecture and higher bone mass than WT mice during aging and long-term ovariectomy. This resistance of bone loss observed in MRL/MpJ mice correlated with the maintenance of higher OSX⁺ osteoprogenitor cell pools, higher activation of the pSMAD5 signaling pathway, more PCNA⁺ cells, and a lower number of osteoclasts. Systemically, lower serum RANKL and DKK1 with higher serum IGF1 and OPG in MRL/MpJ mice relative to WT mice may also contribute to the maintenance of higher bone microarchitecture during aging and less severe bone loss after long-term ovariectomy. These findings may be used to develop therapeutic approaches to maintain bone mass and improve bone regeneration and repair due to injury, disease, and aging.

The Flavonol Quercitrin Hinders GSK3 Activity and Potentiates the Wnt/β-Catenin Signaling Pathway

The Wnt/β-catenin signaling pathway dictates cell proliferation and differentiation during embryonic development and tissue homeostasis. Its deregulation is associated with many pathological conditions, including neurodegenerative disease, frequently downregulated. The lack of efficient treatment for these diseases, including Alzheimer’s disease (AD), makes Wnt signaling an attractive target for therapies. Interestingly, novel Wnt signaling activating compounds are less frequently described than inhibitors, turning the quest for novel positive modulators even more appealing. In that sense, natural compounds are an outstanding source of potential drug leads. Here, we combine different experimental models, cell-based approaches, neuronal culture assays, and rodent behavior tests with Xenopus laevis phenotypic analysis to characterize quercitrin, a natural compound, as a novel Wnt signaling potentiator. We find that quercitrin potentiates the signaling in a concentration-dependent manner and increases the occurrence of the Xenopus secondary axis phenotype mediated by Xwnt8 injection. Using a GSK3 biosensor, we describe that quercitrin impairs GSK3 activity and increases phosphorylated GSK3β S9 levels. Treatment with XAV939, an inhibitor downstream of GSK3, impairs the quercitrin-mediated effect. Next, we show that quercitrin potentiates the Wnt3a-synaptogenic effect in hippocampal neurons in culture, which is blocked by XAV939. Quercitrin treatment also rescues the hippocampal synapse loss induced by intracerebroventricular injection of amyloid-β oligomers (AβO) in mice. Finally, quercitrin rescues AβO-mediated memory impairment, which is prevented by XAV939. Thus, our study uncovers a novel function for quercitrin as a Wnt/β-catenin signaling potentiator, describes its mechanism of action, and opens new avenues for AD treatments.

Effects of Resveratrol, Curcumin and Quercetin Supplementation on Bone Metabolism—A Systematic Review

Phenolic compounds are natural phytochemicals that have recently reported numerous health benefits. Resveratrol, curcumin, and quercetin have recently received the most attention among these molecules due to their documented antioxidant effects. The review aims to investigate the effects of these molecules on bone metabolism and their role in several diseases such as osteopenia and osteoporosis, bone tumours, and periodontitis. The PubMed/Medline, Web of Science, Google Scholar, Scopus, Cochrane Library, and Embase electronic databases were searched for papers in line with the study topic. According to an English language restriction, the screening period was from January 2012 to 3 July 2022, with the following Boolean keywords: (“resveratrol” AND “bone”); (“curcumin” AND “bone”); (“quercetin” AND “bone”). A total of 36 papers were identified as relevant to the purpose of our investigation. The studies reported the positive effects of the investigated phenolic compounds on bone metabolism and their potential application as adjuvant treatments for osteoporosis, bone tumours, and periodontitis. Furthermore, their use on the titanium surfaces of orthopaedic prostheses could represent a possible application to improve the osteogenic processes and osseointegration. According to the study findings, resveratrol, curcumin, and quercetin are reported to have a wide variety of beneficial effects as supplement therapies. The investigated phenolic compounds seem to positively mediate bone metabolism and osteoclast-related pathologies.

Traditional Chinese medicine promotes bone regeneration in bone tissue engineering

Bone tissue engineering (BTE) is a promising method for the repair of difficult-to-heal bone tissue damage by providing three-dimensional structures for cell attachment, proliferation, and differentiation. Traditional Chinese medicine (TCM) has been introduced as an effective global medical program by the World Health Organization, comprising intricate components, and promoting bone regeneration by regulating multiple mechanisms and targets. This study outlines the potential therapeutic capabilities of TCM combined with BTE in bone regeneration. The effective active components promoting bone regeneration can be generally divided into flavonoids, alkaloids, glycosides, terpenoids, and polyphenols, among others. The chemical structures of the monomers, their sources, efficacy, and mechanisms are described. We summarize the use of compounds and medicinal parts of TCM to stimulate bone regeneration. Finally, the limitations and prospects of applying TCM in BTE are introduced, providing a direction for further development of novel and potential TCM.

Chemistry, pharmacokinetics, pharmacological activities, and toxicity of Quercitrin

Quercitrin is a naturally available type of flavonoid that commonly functions as the dietary ingredient and supplement. So far, a wide spectrum of bioactivities of quercitrin have been revealed, including antioxidative stress, antiinflammation, anti-microorganisms, immunomodulation, analgesia, wound healing, and vasodilation. Based on these various pharmacological activities, increasing studies have focused on the potency of quercitrin in diverse diseases in recent years, such as bone metabolic diseases, gastrointestinal diseases, cardiovascular and cerebrovascular diseases, and others. In this paper, by collecting and summarizing publications from the recent years, the natural sources, pharmacological activities and roles in various diseases, pharmacokinetics, structure-activity relationship, as well as the toxicity of quercitrin were systematically reviewed. In addition, the underlying molecular mechanisms of quercitrin in treating related diseases, the dose-effect relationships, and the novel preparations were discussed on the purpose of broadening the application prospect of quercitrin as functional food and providing reference for its clinical application. Notably, clinical studies of quercitrin are insufficient at present, further high-quality studies are needed to firmly establish the clinical efficacy of quercitrin.

Bioactive coatings with anti-osteoclast therapeutic agents for bone implants: Enhanced compliance and prolonged implant life

The use of therapeutic agents that inhibit bone resorption is crucial to prolong implant life, delay revision surgery, and reduce the burden on the healthcare system. These therapeutic agents include bisphosphonates, various nucleic acids, statins, proteins, and protein complexes. Their use in systemic treatment has several drawbacks, such as side effects and insufficient efficacy in terms of concentration, which can be eliminated by local treatment. This review focuses on the incorporation of osteoclast inhibitors (antiresorptive agents) into bioactive coatings for bone implants. The ability of bioactive coatings as systems for local delivery of antiresorptive agents to achieve optimal loading of the bioactive coating and its release is described in detail. Various parameters such as the suitable concentrations, release times, and the effects of the antiresorptive agents on nearby cells or bone tissue are discussed. However, further research is needed to support the optimization of the implant, as this will enable subsequent personalized design of the coating in terms of the design and selection of the coating material, the choice of an antiresorptive agent and its amount in the coating. In addition, therapeutic agents that have not yet been incorporated into bioactive coatings but appear promising are also mentioned. From this work, it can be concluded that therapeutic agents contribute to the biocompatibility of the bioactive coating by enhancing its beneficial properties.

Micro/nano topography of selective laser melting titanium inhibits osteoclastogenesis via mediation of macrophage polarization

Selective laser melting (SLM) titanium (Ti) implants have shown good prospects for personalized clinical application, but further research is necessary to develop stabilized long-term properties. Since surface modification has been proven bioactive for osseointegration, conventional Ti surface treatment technologies, including sandblasting/acid-etching (SLA) and sandblasting/alkali-heating (SAH), were applied to construct micro and micro/nano surfaces. The SAH group with netlike nano-structure topography exhibited appropriate surface roughness and high hydrophilicity, and as expected, the osseointegration capacities in vivo of the three groups were in order of SAH > SLA > SLM. Besides, both in vivo and in vitro studies revealed that the SLA- and SAH-treated SLM Ti implants significantly inhibited osteoclast activity of peri-implants. Considering the close associations between osteoclasts and macrophages, the effects of Ti surface topography on macrophage polarization were detected. The results showed that the SLA- and SAH-treated SLM Ti implants, especially the latter, had the capacity to promote macrophage polarization to the M2 phenotype. Moreover, the cell culture supernatants of M2 macrophages and RAW264.7 cells seeded on SLA- and SAH-treated SLM Ti surfaces had an adverse effect on osteoclastogenesis. Collectively, this study demonstrated that micro/nano topographies of SLM Ti implants were effective for osseointegration promotion, and their inhibition of osteoclastogenesis might be attributed to macrophage polarization. Our findings shed some light on clinical application of SLM Ti implants and also prove a specific association between macrophage polarization and osteoclastogenesis.

An alternative ex vivo method to evaluate the osseointegration of Ti-6Al-4V alloy also combined with collagen

Due to the increasing number of orthopedic implantation surgery and advancements in biomaterial manufacturing, chemistry and topography, there is an increasing need of reliable and rapid methods for the preclinical investigation of osseointegration and bone ingrowth. Implant surface composition and topography increase osteogenicity, osteoinductivity, osteoconductivity and osseointegration of a prosthesis. Among the biomaterials used to manufacture an orthopedic prosthesis, titanium alloy (Ti-6Al-4V) is the most used. Type I collagen (COLL I) induces cell function, adhesion, differentiation and bone extracellular matrix component secretion and it is reported to improve osseointegration if immobilized on the alloy surface. The aim of the present study was to evaluate the feasibility of an alternative ex vivo model, developed by culturing rabbit cortical bone segments with Ti-6Al-4V alloy cylinders (Ti-POR), fabricated through the process of electron beam melting (EBM), to evaluate osseointegration. In addition, a comparison was made with Ti-POR coated with COLL I (Ti-POR-COLL) to evaluate osseointegration in terms of bone-to-implant contact (BIC) and new bone formation (nBAr/TAr) at 30, 60 and 90 d of culture. After 30 and 60 d of culture, BIC and nBAr/TAr resulted significantly higher in Ti-POR-COLL implants than in Ti-POR. No differences have been found at 90 d of culture. With the developed model it was possible to distinguish the biomaterial properties and behavior. This study defined and confirmed for the first time the validity of the alternative ex vivo method to evaluate osseointegration and that COLL I improves osseointegration and bone growth of Ti-6Al-4V fabricated through EBM.

Emerging nanomaterials for dental treatments

The emergence of nanomaterials for dental treatments is encouraged by the nanotopography of the tooth structure, together with the promising benefits of nanomedicine. The use of nanoparticles in dentistry, also termed as 'nanodentistry', has manifested in applications for remineralisation, antimicrobial activity, local anaesthesia, anti-inflammation, osteoconductivity and stem cell differentiation. Besides the applications on dental tissues, nanoparticles have been used to enhance the mechanical properties of dental composites, improving their bonding and anchorage and reducing friction. The small particle size allows for enhanced permeation into deeper lesions, and reduction in porosities of dental composites for higher mechanical strength. The large surface area to volume ratio allows for enhanced bioactivity such as bonding and integration, and more intense action towards microorganisms. Controlled release of encapsulated bioactive molecules such as drugs and growth factors enables them to be delivered more precisely, with site-targeted delivery for localised treatments. These properties have benefitted across multiple fields within dentistry, including periodontology and endodontics and reengineering of dental prosthetics and braces. This review summarises the current literature on the emerging field of nanomaterials for dental treatments.

Quercetin-Based Nanocomposites as a Tool to Improve Dental Disease Management

The restoration and prosthetic rehabilitation of missing teeth are commonly performed using dental implants, which are extremely effective and long-lasting techniques due to their osteointegration ability with the preimplant tissues. Quercetin is a phytoestrogen-like flavonoid well known for its several positive effects on human health, mostly linked to the anti-inflammatory, antioxidant, and antibacterial activities against both Gram-positive and Gram-negative bacteria. Moreover, many studies in dentistry and the maxillofacial fields have highlighted the positive effects of quercetin on osteogenesis, acting on osteoblast activity and angiogenetic process, and promoting soft and hard tissue regeneration. This review focuses on the role of quercetin on the healing and restoration of bony defects, considering the experimental findings of its application both in vitro and in vivo as a mere compound or in association with scaffolds and dental implants having functionalized surfaces.

Nanostructured Titanium for Improved Endothelial Biocompatibility and Reduced Platelet Adhesion in Stent Applications

Although coronary stents have improved the early and long-term consequences of arterial lesions, the prevention of restenosis and late stent thrombosis is key to prevent a new obstruction of the vessel. Here we aimed at improving the tissue response to stents through surface modification. For that purpose, we used two different approaches, the use of nanostructuration by electrochemical anodization and the addition of a quercitrin (QR) coating to the Ti surface. Four surfaces (Ti, NN, TiQR and NNQR) were characterized by atomic force microscopy, scanning electronic microscopy and contact angle analysis and QR content was evaluated by fluorescent staining. Cell adhesion, cytotoxicity, metabolic activity and nitric oxide (NO) production was evaluated on primary human umbilical cord endothelial cells (HUVECs). Platelet adhesion, hemolysis rate and Staphylococcus epidermidis CECT 4184 adhesion at 30 min were analyzed. Nanostructuration induced an increase on surface roughness, and QR coating decreased the contact angle. All surfaces were biocompatible, with no hemolysis rate and lower platelet adhesion was found in NN surfaces. Finally, S. epidermidis adhesion was lower on TiQR surfaces compared to Ti. In conclusion, our results suggest that NN structuration could improve biocompatibility of bare metal stents on endothelial cells and reduce platelet adhesion. Moreover, QR coating could reduce bacterial adhesion.

Quercetin as an Agent for Protecting the Bone: A Review of the Current Evidence

Quercetin is a flavonoid abundantly found in fruits and vegetables. It possesses a wide spectrum of biological activities, thus suggesting a role in disease prevention and health promotion. The present review aimed to uncover the bone-sparing effects of quercetin and its mechanism of action. Animal studies have found that the action of quercetin on bone is largely protective, with a small number of studies reporting negative outcomes. Quercetin was shown to inhibit RANKL-mediated osteoclastogenesis, osteoblast apoptosis, oxidative stress and inflammatory response while promoting osteogenesis, angiogenesis, antioxidant expression, adipocyte apoptosis and osteoclast apoptosis. The possible underlying mechanisms involved are regulation of Wnt, NF-κB, Nrf2, SMAD-dependent, and intrinsic and extrinsic apoptotic pathways. On the other hand, quercetin was shown to exert complex and competing actions on the MAPK signalling pathway to orchestrate bone metabolism, resulting in both stimulatory and inhibitory effects on bone in parallel. The overall interaction is believed to result in a positive effect on bone. Considering the important contributions of quercetin in regulating bone homeostasis, it may be considered an economical and promising agent for improving bone health. The documented preclinical findings await further validation from human clinical trials.

Change in the Dominant Side of Chewing as a Serious Factor for Adjusting the Prophylaxis Strategy for Implant-Supported Fixed Dental Prosthesis of Bounded Lateral Defects

OBJECTIVE

 The main purpose of this article is to study the effect of a change in the dominant side of chewing after prosthetics with fixed structures on implants on the main indicators of osseointegration, adaptation to dentures, and the clinical dental status of patients.

MATERIALS AND METHODS

 In a clinical trial, an analysis was made of the adaptation of 64 patients to intraosseous implant-supported fixed dentures and 56 apparently healthy volunteers. The examination complex included determination of the functionally dominant side of chewing, gnathodynamometry and electromyography indicators of masticatory muscles, and radiological osseointegration criteria. The overall treatment outcomes were evaluated using a visual analogue scale and an objective medical questionnaire, "Prognosis of Adaptation to Orthopedic Structures."

RESULTS

 Patients were divided into two subgroups: with a change in the dominant side of chewing after completion of orthopaedic treatment (40 cases) and without a change in the dominant side of chewing (24 cases). In the second subgroup of patients, in contrast to the first subgroup, relatively better indicators of gnathodynamometer and electromyography were observed. So, in the first group, gnathodynamometry indicators on the dominant side were 255.7 N and in the second group 225 N after 9 to 12 months. Electromyography indices amounted to (198.5 μV s) to (166.3 μV s) after 9 to 12 months. Bone density remained at the required level, and overall treatment outcomes were higher. Namely, the compact plate of the alveolar ridge was preserved, and the condition of the bone tissue around the implants testified to stable osseointegration. The participation of surface masticatory muscles in adaptation of patients to intraosseous implant-supported fixed orthopaedic structures and the necessity and importance of changing the dominant chewing side for the general outcomes of orthopaedic treatment have been discussed.

CONCLUSIONS

 It has been established that a change in the functionally dominant chewing side is accompanied by relatively unstable indicators of chewing function, which is combined with increased loads on the installed prostheses during 3 to 6 months of adaptation. This must be taken into account when planning an individual patient adaptation complex for dental orthopaedic structures.

Drug delivery based pharmacological enhancement and current insights of quercetin with therapeutic potential against oral diseases

The heavy burden of oral diseases such as oral cancers, dental caries, periodontitis, etc. and their consequence on the patient's quality of life demonstrated an urgent demand for developing effective therapeutics. Quercetin as a natural derived flavonoid, could be utilized in the therapeutic formulation of various diseases such as diabetes, breast cancer and asthma, owing to its prominent pharmacological values. In the last decade, the applications of quercetin as a natural compound in oral treatment have attracted increasing interest due to its multifunction including antioxidant, antibacterial, anti-inflammatory and antineoplastic activities. Besides, considering the low bioavailability of quercetin, great efforts have been made in its drug delivery systems to address the problem of limited application. Therefore, this review summarized the cutting-edge researches on versatile effects and enhanced bioavailability of quercetin resulting from innovative drug delivery systems, particularly focused on its potential against oral diseases. The application of quercetin would provide novel and promising therapeutic approach for clinical treatment, promoting the development of global dental public health.

Multifunctional Properties of Quercitrin-Coated Porous Ti-6Al-4V Implants for Orthopaedic Applications Assessed In Vitro

(1) One strategy to improve the outcome of orthopedic implants is to use porous implants with the addition of a coating with an antibacterial biomolecule. In this study, we aimed to produce and test the biocompatibility, the osteopromotive (both under normal conditions and under a bacterial challenge with lipopolysaccharide (LPS)) and antibacterial activities of a porous Ti-6Al-4V implant coated with the flavonoid quercitrin in vitro. (2) Porous Ti-6Al-4V implants were produced by 3D printing and further functionalized with quercitrin by wet chemistry. Implants were characterized in terms of porosity and mechanical testing, and the coating with quercitrin by fluorescence staining. Implant biocompatibility and bioactivity was tested using MC3T3-E1 preosteoblasts by analyzing cytotoxicity, cell adhesion, osteocalcin production, and alkaline phosphatase (ALP) activity under control and under bacterial challenging conditions using lipopolysaccharide (LPS). Finally, the antibacterial properties of the implants were studied using Staphylococcus epidermidis by measuring bacterial viability and adhesion. (3) Porous implants showed pore size of about 500 µm and a porosity of 52%. The coating was homogeneous over all the 3D surface and did not alter the mechanical properties of the Young modulus. Quercitrin-coated implants showed higher biocompatibility, cell adhesion, and osteocalcin production compared with control implants. Moreover, higher ALP activity was observed for the quercitrin group under both normal and bacterial challenging conditions. Finally, S. epidermidis live/dead ratio and adhesion after 4 h of incubation was lower on quercitrin implants compared with the control. (4) Quercitrin-functionalized porous Ti-6Al-4V implants present a great potential as an orthopedic porous implant that decreases bacterial adhesion and viability while promoting bone cell growth and differentiation.

Identification and quantification of Meiguihua oral solution using liquid chromatography combined with hybrid quadrupole-orbitrap and triple quadrupole mass spectrometers

Meiguihua oral solution (MOS), a classical Chinese medicinal formula, was approved by the China Food and Drug Administration for production. However, the quality evaluation of MOS has not been reported. In this present study, qualitative and quantitative analysis of MOS were conducted by ultra high performance liquid chromatography coupled to quadrupole-orbitrap high resolution mass spectrometry (UHPLC-Q-orbitrap-HRMS) and high performance liquid chromatography-tri-quadrupole linear ion trap mass spectrometry (HPLC-tri-Q-LIT-MS). Totally 46 phenolic compounds (21 flavonoids and 25 tannins) were identified in the MOS, among them 14 polyphenols were not reported in raw plant materials of MOS. The simultaneous quantification of ten compounds including gallic acid, quercetin-3-O-sophoroside, ellagic acid, sophoraflavonoloside, hyperoside, isoquercitrin, avicularin, astragalin, quercitrin and juglanin, which were completed in 16 min in the negative electrospray ionization (ESI) mode under multiple reaction monitoring (MRM) method. Linearity was reached fine determination coefficient (r² > 0.9995). Precisions, repeatability, stability (inter-day and intra-day), and recovery were validated and the relative standard deviations (RSD) were less than 2.9%, 4.7%, 3.6% and 1.79%, respectively. This result proved the high sensitivity and efficiency of the method. The quantitative and qualitative analysis of MOS would provide the substantial basis for further quality control and medicinal values.

Protective effects and network analysis of natural compounds obtained from Radix dipsaci, Eucommiae cortex, and Rhizoma drynariae against RANKL-induced osteoclastogenesis in vitro

ETHNOPHARMACOLOGICAL RELEVANCE

Osteoporosis is one of the most common bone diseases; it is characterized by bone loss and is a risk factor for hip fracture. Chinese herbal medicines (CHMs) and their related natural compounds have been used for treating many diseases, including bone diseases, since ancient times in China and are regarded as a cost-effective complementary therapy.

AIM OF THE STUDY

The goal of this study was to investigate the osteoprotective mechanisms of these three Chinese herbs and their related natural compounds. The effects of CHMs and related natural compounds on RANKL-induced osteoclastogenesis in vitro were investigated.

MATERIALS AND METHODS

A network pharmacology method was applied to study CHM-related natural compounds and their osteoporosis targets. In addition, their effect on RANKL-induced osteoclastogenesis in RAW264.7 cells was also investigated in vitro.

RESULTS

Radix dipsaci, Eucommiae cortex, and Rhizoma drynariae exhibited protective effects against mortality in hip fracture patients. Furthermore, these three herbs inhibited RANKL-induced TRAP activities and reduced the expression of bone resorption-related genes in RAW264.7 cells. Network analysis of natural compound (ingredient)-target interactions identified 11 natural compounds. Signal pathway analyses suggested that these compounds may target cytokine-cytokine receptor interactions, including RANKL-induced osteoclastogenesis. Five novel natural compounds exhibited reduced RANKL-induced TRAP activities and bone resorption-related gene expression.

CONCLUSION

The clinically used CHMs, Radix dipsaci, Eucommiae cortex, and Rhizoma drynariae, and natural compounds obtained from them may suppress RANKL-induced osteoclastogenesis in vitro.

Antiseptic sealant and a nanocoated implant-abutment interface improve the results of dental implantation

BACKGROUND

Clinical measures and implant design innovation to improve primary osseointegration and reduce the bacterial contamination of the peri-implant area are intended to reduce the incidence of late inflammatory complications in dental implantation.

PURPOSE

To study the effect of nanostructured coating and antiseptic sealant on the outcomes of dental implantation.

MATERIALS AND METHODS

Ninety-six individuals were clinically supervised. In the first group (Screw Ti + sealant), a special antiseptic sealant matrix was used; the same sealant was used with nanocoated implants in the second group (Nanocoat + sealant), and the conventional treatment protocol was used in the control group (Screw Ti). Patients were evaluated longitudinally during treatment and rehabilitation phases with clinical examinations, radiography, periodontal pathogen detection, and patient experience surveys.

RESULTS

For patients who received a nanocoated implant and an antiseptic sealant (Nanocoat + sealant), relatively better hygienic indices were observed; there was less contamination with periodontal pathogens, bone density remained at the required level, and the overall results of treatment were better.

CONCLUSIONS

Using a matrix for sealing the dental implant-abutment interface with a nanostructured surface provides reliable results regarding stable osseointegration and clinical and patient-reported outcomes of treatment success.