Superhydrophilic Polyurethane/Polydopamine Nanofibrous Materials Enhancing Cell Adhesion for Application in Tissue Engineering

Shore hardness of bulk polyurethane affects the properties of nanofibrous materials differently

The present study shows the effect of the hardness of bulk polyurethane on the properties of nanofibrous materials produced in the solution blow spinning process. This study focuses on nanofibrous materials made from medical-grade polyurethanes with different hardness values on the Shore scale, from 75A to 75D. We aimed to determine the effect of the intrinsic properties of polyurethane used to produce nanofibers on the tensile properties of the resulting nanofibrous materials and in vitro platelet adhesiveness. This study used a solution blow spinning process to produce nanofibrous materials from polyurethane solutions. It evaluates their properties using scanning electron microscopy, followed by porosity determination, tensile testing, and platelet adhesion assays. Generally, the bulk polymer's Shore hardness affects nanofibrous products' porosity and tensile properties. In the tested Shore hardness range, the most visible differences in material properties were observed for the fibers produced from the hardest (75D) and softest (75A) polyurethanes. The nanofibrous material produced using 75D polyurethane exhibited the highest porosity, up to approximately 0.87, owing to the low packing density of the stiff nanofibers. It also remained the stiffest, with the highest Young's modulus. On the other hand, the softest 75A polyurethane produced a less porous nanofibrous mat with the highest tensile strength among the tested polyurethanes. All tested nanofibrous materials retained their platelet adhesion resistance upon processing into nanofibers, with a mean platelet coverage below 1 % of the nanofibrous mat surface. The study results provide insights into the relationship between the hardness of bulk polyurethane and the properties of nanofibrous materials, which can be useful in various biomedical applications, particularly in producing tissue-engineered vascular grafts.

Development studies on the orodispersible freeze-dried platforms for lurasidone hydrochloride - Understanding the effect of amino acid additive and lyophilization stage

In this study, lyophilizates with the second-class antipsychotic agent lurasidone hydrochloride were developed as orodispersible platforms to improve patients' adherence. The primary aim was to evaluate the effect of the amino acid additive (L-arginine, L-lysine, L-histidine) and the freeze-drying stage on the pharmaceutical performance of the designed formulations. The composition was initially optimized using an experimental design approach. The amino acids (in particular L-histidine) acted as dispersing agents, prevented drug aggregation and assured high drug content uniformity within the lyophilizate matrix. The freeze-drying stage reduced the particles dimensions which significantly increased solubility of lurasidone hydrochloride, and consequently, it's dissolution rate. The presence of L-arginine in lyophilizate composition balanced out sufficient compression strength with a rapid drug release. Despite the fact that L-lysine enhanced the mechanical strength, it also caused delayed drug release. Notably, L-histidine and L-arginine accelerated transport of lurasidone hydrochloride through the porcine buccal epithelium with approximately 100% and 50% increase in absorption, respectively, when compared to commercial reference drug. Overall, the designed lyophilizates containing L-histidine and L-arginine, hold promise as orodispersible platforms for improved performance of lurasidone hydrochloride.

Cotton-like antibacterial polyacrylonitrile nanofiber-reinforced chitosan scaffold: Physicochemical, mechanical, antibacterial, and MC3T3-E1 cell viability study

Bio-scaffolds, while mimicking the morphology of native tissue and demonstrating suitable mechanical strength, enhanced cell adhesion, proliferation, infiltration, and differentiation, are often prone to failure due to microbial infections. As a result, tissue engineers are seeking ideal scaffolds with antibacterial properties. In this study, silver nanoparticles (AgNPs) were integrated into cotton-like polyacrylonitrile nanofibers via a polydopamine (PDA) interlayer (Ag@p-PAN). These Ag@p-PAN nanofibers were then incorporated into the chitosan (CS) matrix, developing an antibacterial CS/Ag@p-PAN composite scaffold. The composite scaffold features an interconnected porous morphology with fiber-infused pore walls, improved water absorption and swelling properties, a controlled degradation profile, enhanced porosity, better mechanical strength, strong antibacterial properties, and excellent MC3T3-E1 cell viability, adhesion, proliferation, and infiltration. This study presents a novel method for reinforcing CS-based scaffolds by incorporating bioactive nanofibers, offering potential applications in tissue engineering and other biomedical fields.

Advances in Mussel Adhesion Proteins and Mussel-Inspired Material Electrospun Nanofibers for Their Application in Wound Repair

Mussel refers to a marine organism with strong adhesive properties, and it secretes mussel adhesion protein (MAP). The most vital feature of MAP is the abundance of the 3,4-dihydroxyphenylalanine (DOPA) group and lysine, which have antimicrobial, anti-inflammatory, antioxidant, and cell adhesion-promoting properties and can accelerate wound healing. Polydopamine (PDA) is currently the most widely used mussel-inspired material characterized by good adhesion, biocompatibility, and biodegradability. It can mediate various interactions to form functional coatings on cell-material surfaces. Nanofibers based on MAP and mussel-inspired materials have been exerting a vital role in wound repair, while there is no comprehensive review presenting them. This Review introduces the structure of MAPs and their adhesion mechanisms and mussel-inspired materials. Second, it introduces the functionalized modification of MAPs and their inspired materials in electrospun nanofibers and application in wound repair. Finally, the future development direction and coping strategies of MAP and mussel-inspired materials are discussed. Moreover, this Review can offer novel strategies for the application of nanofibers in wound repair and bring about new breakthroughs and innovations in tissue engineering and regenerative medicine.

Preparation and Immobilization Mechanism on a Novel Composite Carrier PDA-CF/PUF to Improve Cells Immobilization and Xylitol Production

The preparation of a novel composite carrier of polydopamine-modified carbon fiber/polyurethane foam (PDA-CF/PUF) was proposed to improve cell immobilization and the fermentation of xylitol, which is an important food sweetener and multifunctional food additive. Candida tropicalis was immobilized on the composite carrier by adsorption and covalent binding. The properties and immobilization mechanism of the composite carrier and its effect on immobilized cells were investigated. It showed that the modification of PDA enhanced the loading of CF on the PUF surface and the adhesion of cells on the composite carrier surface. Also, the biocompatibility of carriers to cells was improved. In addition, the introduction of PDA increased the active groups on the surface of the carrier, enhanced the hydrophilicity, promoted the cells immobilization, and increased the xylitol yield. It was also found that expression of the related gene XYL1 in cells was significantly increased after the immobilization of the PDA-CF/PUF composite carrier during the fermentation. The PDA-CF/PUF was an immobilized carrier with the excellent biocompatibility and immobilization performance, which has great development potential in the industrial production of xylitol.

Fabrication and Characterization of a Polydopamine-Modified Bacterial Cellulose and Sugarcane Filter Cake-Derived Hydroxyapatite Composite Scaffold

The search for environmentally friendly and sustainable sources of raw materials has been ongoing for quite a while, and currently, the utilization and applications of agro-industrial biomass residues in biomedicine are being researched. In this study, a polydopamine (PDA)-modified bacterial cellulose (BC) and hydroxyapatite (HA) composite scaffold was fabricated using the freeze-drying method. The as-prepared hydroxyapatite was synthesized via the chemical precipitation method using sugarcane filter cake as a calcium source, as reported in a previous study. X-ray diffraction analysis revealed a carbonated phase of the prepared hydroxyapatite, similar to that of the natural bone mineral. Wide-angle X-ray scattering analysis revealed the successful fabrication of BC/HA composite scaffolds, while X-ray photoelectron spectroscopy suggested that PDA was deposited on the surface of the BC/HA composite scaffolds. In vitro cell viability assays indicated that BC/HA and PDA-modified composite scaffolds did not induce cytotoxicity and were biocompatible with MC3T3-E1 preosteoblasts. PDA-modified composite scaffolds showed enhanced protein adsorption capacity in vitro compared to the unmodified scaffolds. On a concluding note, these results demonstrate that agro-industrial biomass residues have the potential to be used in biomedical applications and that PDA-modified BC/HA composite scaffolds are a promising biomaterial for bone tissue engineering.

Chitosan-salvianolic acid B coating on the surface of nickel-titanium alloy inhibits proliferation of smooth muscle cells and promote endothelialization

Introduction: Intracranial stents are of paramount importance in managing cerebrovascular disorders. Nevertheless, the currently employed drug-eluting stents, although effective in decreasing in-stent restenosis, might impede the re-endothelialization process within blood vessels, potentially leading to prolonged thrombosis development and restenosis over time. Methods: This study aims to construct a multifunctional bioactive coating to enhance the biocompatibility of the stents. Salvianolic acid B (SALB), a bioactive compound extracted from Salvia miltiorrhiza, exhibits potential for improving cardiovascular health. We utilized dopamine as the base and adhered chitosan-coated SALB microspheres onto nickel-titanium alloy flat plates, resulting in a multifunctional drug coating. Results: By encapsulating SALB within chitosan, the release period of SALB was effectively prolonged, as evidenced by the in vitro drug release curve showing sustained release over 28 days. The interaction between the drug coating and blood was examined through experiments on water contact angle, clotting time, and protein adsorption. Cellular experiments showed that the drug coating stimulates the proliferation, adhesion, and migration of human umbilical vein endothelial cells. Discussion: These findings indicate its potential to promote re-endothelialization. In addition, the bioactive coating effectively suppressed smooth muscle cells proliferation, adhesion, and migration, potentially reducing the occurrence of neointimal hyperplasia and restenosis. These findings emphasize the exceptional biocompatibility of the newly developed bioactive coating and demonstrate its potential clinical application as an innovative strategy to improve stent therapy efficacy. Thus, this coating holds great promise for the treatment of cerebrovascular disease.

Vaginal reconstruction with a double-sided biomembrane-a preclinical experimental study on large animals

Tissue engineering techniques bring the promise of vaginal reconstruction with low invasiveness and fewer complications. However, existing biomaterial scaffolds remain limited in efficient vaginal recovery, focusing only on regenerating an epithelial layer, but muscle layers are missing or abnormal. The lack of a multi-tissue hierarchical structure in the reconstructed vagina leads to shrinking, stenosis, and fibrosis. Here, an acellular matrix named a double-sided biomembrane (DBM) is demonstrated for vaginal recovery. The regeneration of epithelial and muscle layers is achieved simultaneously since the smooth side of the DBM is helpful for guiding epithelial cell growth, while its loose and porous side guides muscle cell growth. In addition, the DBM demonstrates excellent mechanical properties similar to vaginal tissue, and hydrophilicity. Therefore, neovaginas were observed in the fourth and twelfth weeks after DBMs were transplanted to repair full-thickness vaginal defects (4 cm) that we established in large animals. The DBMs can effectively promote rapid epithelialization, the formation of large muscle bundles, higher rates of angiogenesis, and the restoration of physiological function in a neovagina. That is, the injured vagina achieves nearly complete recovery in anatomy and function, similar to a normal vagina. These preclinical results indicate that the DBM has prospects for vaginal injury repair.

Composite microgranular scaffolds with surface modifications for improved initial osteoblastic cell proliferation

Polyester-based granular scaffolds are a potent material for tissue engineering due to their porosity, controllable pore size, and potential to be molded into various shapes. Additionally, they can be produced as composite materials, e.g., mixed with osteoconductive β-tricalcium phosphate or hydroxyapatite. Such polymer-based composite materials often happen to be hydrophobic, which disrupts cell attachment and decreases cell growth on the scaffold, undermining its primary function. In this work, we propose the experimental comparison of three modification techniques for granular scaffolds to increase their hydrophilicity and cell attachment. Those techniques include atmospheric plasma treatment, polydopamine coating, and polynorepinephrine coating. Composite polymer/β-tricalcium phosphate granules have been produced in a solution-induced phase separation (SIPS) process using commercially available biomedical polymers: poly(lactic acid), poly(lactic-co-glycolic acid), and polycaprolactone. We used thermal assembly to prepare cylindrical scaffolds from composite microgranules. Atmospheric plasma treatment, polydopamine coating, and polynorepinephrine coating showed similar effects on polymer composites' hydrophilic and bioactive properties. All modifications significantly increased human osteosarcoma MG-63 cell adhesion and proliferation in vitro compared to cells cultured on unmodified materials. In the case of polycaprolactone/β-tricalcium phosphate scaffolds, modifications were the most necessary, as unmodified polycaprolactone-based material disrupted the cell attachment. Modified polylactide/β-tricalcium phosphate scaffold supported excellent cell growth and showed ultimate compressive strength exceeding this of human trabecular bone. This suggests that all investigated modification techniques can be used interchangeably for increasing wettability and cell attachment properties of various scaffolds for medical applications, especially those with high surface and volumetric porosity, like granular scaffolds.

Controlled formation of highly porous polylactic acid‑calcium phosphate granules with defined structure

Synthetic bone repair materials are becoming increasingly popular in tissue engineering as a replacement for autografts and human/animal-based bone grafts. The biomedical application requires precise control over the material composition and structure, as well as over the size of granulate used for filling the bone defects, as the pore size and interconnectivity affect the regeneration process. This paper proposes a process of alloplastic and biodegradable polylactic acid/β-tricalcium phosphate granulates preparation and its parameters described. Using solvent-induced phase separation technique, porous spheres have been obtained in various sizes and morphologies. The design of the experiment's approach generated an experimental plan for further statistical modeling using the resulting data. The statistical modeling approach to the data from conducting a designed set of experiments allowed analysis of the influence of process parameters on the properties of the resulting granules. We confirmed that the content of β-tricalcium phosphate plays the most significant role in the size distribution of prepared granulate. The shape of the particles becomes less spherical with higher phosphate concentration in the emulsion. The proposed technique allows preparing porous granulates in the 0.2-1.8 mm diameter range, where granules' mean diameter and sphericity are tunable with polymer and phosphate concentrations. The granulate created a potentially implantable scaffold for resected bone regeneration, as cytotoxicity tests assured the material is non-cytotoxic in vitro, and human mesenchymal stem cells have been cultured on the surface of granulates. Results from cell cultures seeded on the Resomer LR 706S granulates were the most promising.

Polymerization of l-Tyrosine, l-Phenylalanine, and 2-Phenylethylamine as a Versatile Method of Surface Modification for Implantable Medical Devices

Surface properties are crucial for medical device and implant research and applications. We present novel polycatecholamine coatings obtained by oxidative polymerization of l-tyrosine, l-phenylalanine, and 2-phenylethylamine based on mussel glue-inspired chemistry. We optimized the reaction parameters and examined the properties of coatings compared to the ones obtained from polydopamine. We produced polycatecholamine coatings on various materials used to manufacture implantable medical devices, such as polyurethane, but also hard-to-coat polydimethylsiloxane, polytetrafluoroethylene, and stainless steel. The coating process results in significant hydrophilization of the material's surface, reducing the water contact angle by about 50 to 80% for polytetrafluoroethylene and polyurethane, respectively. We showed that the thickness, roughness, and stability of the polycatecholamine coatings depend on the chemical structure of the oxidized phenylamine. In vitro experiments showed prominent hemocompatibility of our coatings and significant improvement of the adhesion and proliferation of human umbilical vein endothelial cells. The full confluence on the surface of coated polytetrafluoroethylene was achieved after 5 days of cell culture for all tested polycatecholamines, and it was maintained after 14 days. Hence, the use of polycatecholamine coatings can be a simple and versatile method of surface modification of medical devices intended for contact with blood or used in tissue engineering.

Chitosan-poly(ethylene oxide) nanofibrous mat as a vaginal platform for tenofovir disoproxyl fumarate - The effect of vaginal pH on drug carrier performance

In the present work, a solution blow spun nanofibrous mat comprised of chitosan (CS) and poly(ethylene oxide) (PEO) was obtained as vaginal platform for tenofovir disoproxil fumarate (TDF) to prevent sexually transmitted infections. Apart from physicochemical and mechanical analysis, the specific steps involved studies on nanofibrous mat mucoadhesive and swelling characteristics upon pH fluctuations over the physiological range. Physicochemical analysis showed uniform drug distribution within the CS/PEO mat volume and pointed toward physical interactions between the drug and polymers. TDF-loaded CS/PEO nanofibrous mat was shown potentially safe when evaluated by the MTT metabolic activity and JC-1 assays in human vaginal epithelial cells VK2-E6/E7. In vitro antiviral studies indicated inhibition efficacy of TDF-CS/PEO nanofibrous mat toward HSV-2 virus and proved the SBS process does not change the microbicidal activity of drug molecule. Fluctuations in the physiological vaginal pH range of 3.8 to 5.0 substantially affected mucoadhesive and swelling behavior of chitosan which in turn impacted drug dissolution rate from polymer carrier. The rate of permeation and accumulation of TDF in vaginal tissue differed in response to vaginal pH. Faster drug permeation assessed at pH 5.0 suggests that an increase in vaginal pH could improve TDF bioavailability at earlier time points.

Chitosan-Enriched Solution Blow Spun Poly(Ethylene Oxide) Nanofibers with Poly(Dimethylsiloxane) Hydrophobic Outer Layer for Skin Healing and Regeneration

Chitosan (CS)/poly(ethylene oxide) (PEO)-based nanofiber mats have attracted particular attention as advanced materials for medical and pharmaceutical applications. In the scope of present studies, solution blow spinning was applied to produce nanofibers from PEO and CS and physicochemical and biopharmaceutical studies were carried out to investigate their potential as wound nanomaterial for skin healing and regeneration. Additional coating with hydrophobic poly(dimethylsiloxane) was applied to favor removal of nanofibers from the wound surface. Unmodified nanofibers displayed highly porous structure with the presence of uniform, randomly aligned nanofibers, in contrast to coated materials in which almost all the free spaces were filled in with poly(dimethylsiloxane). Infrared spectroscopy indicated that solution blow technique did not influence the molecular nature of native polymers. Obtained nanofibers exhibited sufficient wound exudate absorbency, which appears beneficial to moisturize the wound bed during the healing process. Formulations displayed greater tensile strength as compared to commercial hydrofiber-like dressing materials comprised of carboxymethylcellulose sodium or calcium alginate, which points toward their protective function against mechanical stress. Coating with hydrophobic poly(dimethylsiloxane) (applied to favor nanofiber removal from the wound surface) impacted porosity and decreased both mechanical properties and adherence to excised human skin, though the obtained values were comparable to those attained for commercial hydrofiber-like materials. In vitro cytotoxicity and irritancy studies showed biocompatibility and no skin irritant response of nanofibers in contact with a reconstituted three-dimensional human skin model, while scratch assay using human fibroblast cell line HDFa revealed the valuable potential of CS/PEO nanofibers to promote cell migration at an early stage of injury.

Superhydrophilic PLGA-Graft-PVP/PC Nanofiber Membranes for the Prevention of Epidural Adhesion

Background

The frequent occurrence of failed back surgery syndrome (FBSS) seriously affects the quality of life of postoperative lumbar patients. Epidural adhesion is the major factor in FBSS.

Purpose

A safe and effective antiadhesion material is urgently needed.

Methods

A superhydrophilic PLGA-g-PVP/PC nanofiber membrane (NFm) was prepared by electrospinning. FTIR was performed to identify its successful synthesis. Scanning electron microscopy, thermogravimetric analysis, differential scanning calorimetry, and water contact angle measurement were performed. CCK-8 assays were performed in primary rabbit fibroblasts (PRFs) and RAW264.7 cells to explore the cytotoxicity of PLGA-g-PVP/PC NFm. Calcein-AM/PI staining was used to measure the adhesion status in PRFs. ELISA was performed to measure the concentrations of TNF-α and IL-10 in RAW264.7 cells. In addition, the anti-epidural adhesion efficacy of the PLGA-g-PVP/PC NFm was determined in a rabbit model of lumbar laminectomy.

Results

The PLGA-g-PVP/PC NFm exhibited ultrastrong hydrophilicity and an appropriate degradation rate. Based on the results of the CCK-8 assays, PLGA-g-PVP/PC NFm had no cytotoxicity to PRFs and RAW264.7 cells. Calcein-AM/PI staining showed that PLGA-g-PVP/PC NFm could inhibit PRF adhesion. ELISAs showed that PLGA-g-PVP/PC NFm could attenuate lipopolysaccharide-induced macrophage activation. In vivo experiments further confirmed the favorable anti-epidural adhesion effect of PLGA-g-PVP/PC NFm and the lack of a strong inflammatory response.

Conclusion

In this study, PLGA-g-PVP/PC NFm was developed successfully to provide a safe and effective physical barrier for preventing epidural adhesion. PLGA-g-PVP/PC NFm provides a promising strategy for preventing postoperative adhesion and has potential for clinical translation.

Pneumatospinning Biomimetic Scaffolds for Meniscus Tissue Engineering

Nanofibrous scaffolds fabricated via electrospinning have been proposed for meniscus tissue regeneration. However, the electrospinning process is slow, and can only generate scaffolds of limited thickness with densely packed fibers, which limits cell distribution within the scaffold. In this study, we explored whether pneumatospinning could produce thicker collagen type I fibrous scaffolds with higher porosity, that can support cell infiltration and neo-fibrocartilage tissue formation for meniscus tissue engineering. We pneumatospun scaffolds with solutions of collagen type I with thicknesses of approximately 1 mm in 2 h. Scanning electron microscopy revealed a mix of fiber sizes with diameters ranging from 1 to 30 µm. The collagen scaffold porosity was approximately 48% with pores ranging from 7.4 to 100.7 µm. The elastic modulus of glutaraldehyde crosslinked collagen scaffolds was approximately 45 MPa, when dry, which reduced after hydration to 0.1 MPa. Mesenchymal stem cells obtained from the infrapatellar fat pad were seeded in the scaffold with high viability (>70%). Scaffolds seeded with adipose-derived stem cells and cultured for 3 weeks exhibited a fibrocartilage meniscus-like phenotype (expressing COL1A1, COL2A1 and COMP). Ex vivo implantation in healthy bovine and arthritic human meniscal explants resulted in the development of fibrocartilage-like neotissues that integrated with the host tissue with deposition of glycosaminoglycans and collagens type I and II. Our proof-of-concept study indicates that pneumatospinning is a promising approach to produce thicker biomimetic scaffolds more efficiently that electrospinning, and with a porosity that supports cell growth and neo-tissue formation using a clinically relevant cell source.

Electrospun multifunctional nanofibrous mats loaded with bioactive anemoside B4 for accelerated wound healing in diabetic mice

With the worldwide prevalence of diabetes and considering the complicated microenvironment of diabetic wounds, the design and development of innovative multifunctional wound dressing materials are much wanted for the treatment of hard-to-heal wounds in diabetic patients. In the present study, anti-inflammatory ingredients loaded with nanofibrous wound dressing materials were manufactured by a promising blend-electrospinning strategy, and their capability for treating the diabetic wound was also systematically explored. A polymer blend consisting of Chitosan (CS) and polyvinyl alcohol (PVA) was electrospun into CS-PVA nanofibrous mats as control groups. In the meanwhile, a bioactive ingredient of Chinese medicine Pulsatilla, anemoside B4(ANE), with different contents were loaded into the electrospinning solution to construct CS-PVA-ANE nanofibrous mats. The developed CS-PVA-ANE wound dressing materials exhibited multifunctional properties including prominent water absorption, biomimetic elastic mechanical properties, and sustained ANE releasing behavior, as well as outstanding hemostatic properties. The in vitro studies showed that the CS-PVA-ANE nanofiber mats could significantly suppress lipopolysaccharide (LPS)-stimulated differentiation of pro-inflammatory (M1) macrophage subsets, and notably reduce the reactive oxygen species (ROS) generation, as well as obviously decrease inflammatory cytokine release. The in vivo animal studies showed that the CS-PVA-ANE nanofiber mats promoted the healing of diabetic wounds by significantly enhancing wound closure rates, accelerating excellent angiogenesis, promoting re-epithelization and collagen matrix deposition throughout all stages of wound healing. The present study demonstrated that CS-PVA-ANE nanofiber mats could effectively shorten the wound-healing time by inhibiting inflammatory activity, which makes them promising candidates for the treatment of hard-to-heal wounds caused by diabetes.

Research Progress on Polydopamine Nanoparticles for Tissue Engineering

Tissue engineering is an interdisciplinary field that aims to develop biological substitutes for the replacement, repair, or enhancement of tissue function. The physical and chemical characteristics of biomaterials exert a profound influence on the biological responses and the following biofunction. Nanostructured coatings have been widely applied as an effective surface modification strategy to improve the bioactivity of biomaterials. Especially, polydopamine and polydopamine-derived nanoparticles are found with excessive adhesiveness, redox activity, photothermal conversion capacity, paramagnetism and conductivity other than excellent biocompatibility, and hydrophilicity. In this article, advances about polydopamine nanoparticles in tissue engineering applications are reviewed, including the repair of bone, cartilage, skin, heart, and nerve, to provide strategies for future biomaterial design.

Preparation and Antifouling Property of Polyurethane Film Modified by PHMG and HA Using Layer-by-Layer Assembly

To reduce the possibility of bacterial infection and implant-related complications, surface modification on polyurethane (PU) film is an ideal solution to endow hydrophobic PU with antibacterial and antifouling properties. In this work, a variety of polyhexamethylene guanidine/ hyaluronic acid (PHMG/HA) multilayer films were self-assembled layer-by-layer on PU films using polyanions, carboxyl-activated HA, and polycations PHMG by controlling the concentration of these polyelectrolytes as well as the number of layers self-assembled. Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) spectra, water contact angle (WCA), and A Atomic force microscope (AFM) of PU and modified PU films were studied. Protein adsorption and bacterial adhesion as well as the cytotoxicity against L929 of the film on selected PU-(PHMG/HA)₅/5-5 were estimated. The results showed that PU-(PHMG/HA)₅/5-5 had the best hydrophilicity among all the prepared films, possessing the lowest level of protein adsorption. Meanwhile, this film showed efficient broad-spectrum antibacterial performance as well as significant resistance of bacterial adhesion of more than a 99.9% drop for the selected bacteria. Moreover, almost no influence on cell viability of L929 enhanced the biocompatibility of film. Therefore, the modified PU films with admirable protein absorption resistance, antimicrobial performance, and biocompatibility would have promising applications in biomedical aspect.