Tailoring Chitosan/LTA Zeolite Hybrid Aerogels for Anionic and Cationic Dye Adsorption

Compressible polydopamine modified pomelo peel powder/poly(ethyleneimine)/κ-carrageenan aerogel with pH-tunable charge for selective removal of anionic and cationic dyes

In this work, a novel biomass-based aerogel, polydopamine decorated pomelo peel powder/polyethyleneimine/κ-carrageenan (PPEKC) aerogel, was developed for dye wastewater treatment. The as-prepared PPEKC aerogel possessed a robust structure and good compressible resilience. As expected, this aerogel presented remarkable efficacy in eliminating both anionic and cationic dyes. The experimental maximum adsorption capacities were 2016.7 mg g-1 for congo red (CR) at pH = 5 and 1176.6 mg g-1 for methylene blue (MEB) at pH = 11, following with ultra-fast adsorption rates. The adsorption kinetics followed the pseudo-second-order model. The adsorption isotherms exhibited a stronger alignment with the Langmuir isotherm model for CR at 308 K and MEB at 288, 298, 308 K. The Freundlich isotherm model yielded a suitable fit for the adsorption of CR at 288 and 298 K. Thermodynamic analyses indicated that the removal of CR and MEB was spontaneous and endothermic. The adsorption mechanisms involved electrostatic interactions, π-π interactions, and hydrogen bonds. Intriguingly, it could achieve bidirectional selective adsorption of anionic and cationic dyes in the designed pH values, due to pH-tunable surface charge. Additionally, it also exhibited favorable reusability and antibacterial activity. Therefore, the as-prepared PPEKC aerogel could be a promising biosorbent for dye wastewater treatment.

Cow Dung-Based Biochar Materials Prepared via Mixed Base and Its Application in the Removal of Organic Pollutants

Cow dung (CD) is a waste product of livestock production. Improper disposal of a large amount of CD will cause environmental pollution. In this work, three biochar materials based on CD (BMCD) were prepared by using three types of base, including KOH, NaOH, and mixed base (MB, a mixture of equal mass NaOH and KOH) as activators to investigate the different physicochemical properties of BMCDs (BMCD-K, BMCD-Na, and BMCD-MB). The objective was to verify the effectiveness of MB activation in the preparation of biochar materials. The results show that MB has an effect on the structural characteristics of BMCDs. In particular, the surface area and total pore volume, the specific surface area, and the total pore volume of BMCD-MB (4081.1 m² g⁻¹ and 3.0118 cm³ g⁻¹) are significantly larger than those of BMCD-K (1784.6 m² g⁻¹ and 1.1142 cm³ g⁻¹) and BMCD-Na (1446.1 m² g⁻¹ and 1.0788 cm³ g⁻¹). While synthetic dye rhodamine B (RhB) and antibiotic tetracycline hydrochloride (TH) were selected as organic pollutant models to explore the adsorption performances, the maximum adsorption capacities of BMCD-K, BMCD-NA and BMCD-MB were 951, 770, and 1241 mg g⁻¹ for RhB, 975, 1051, and 1105 mg g⁻¹ for TH, respectively, which were higher than those of most adsorbents. This study demonstrated that MB can be used as an effective activator for the preparation of biochar materials with enhanced performance.

Chitosan- and Alginate-Based Hydrogels for the Adsorption of Anionic and Cationic Dyes from Water

Novel hydrogel systems based on polyacrylamide/chitosan (PAAM/chitosan) or polyacrylic acid/alginate (PAA/alginate) were prepared, characterized, and applied to reduce the concentrations of dyes in water. These hydrogels were synthetized via a semi-interpenetrating polymer network (semi-IPN) and then characterized by Fourier transformed infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA), and their swelling capacities in water were measured. In the adsorption experiments, methylene blue (MB) was used as a cationic dye, and methyl orange (MO) was used as an anionic dye. The study was carried out using a successive batch method for the dye absorption process and an equilibrium system to investigate the adsorption of MO on PAAM/chitosan hydrogels and MB on PAA/alginate in separate experiments. The results showed that the target hydrogels were synthetized with high yield (more than 90%). The chemical structure of the hydrogels was corroborated by FTIR, and their high thermal stability was verified by TGA. The absorption of the MO dye was higher at pH 3.0 using PAAM/chitosan, and it had the ability to remove 43% of MO within 10 min using 0.05 g of hydrogel. The presence of interfering salts resulted in a 20–60% decrease in the absorption of MO. On the other hand, the absorption of the MB dye was higher at pH 8.5 using PAA/alginate, and it had the ability to remove 96% of MB within 10 min using 0.05 g of hydrogel, and its removal capacity was stable for interfering salts.

The Use of Bilberry Leaves (Vaccinium myrtillus L.) as an Efficient Adsorbent for Cationic Dye Removal from Aqueous Solutions

In this study, a new lignocellulosic bioadsorbent, bilberry (Vaccinium myrtillus L.) leaves powder, was used to remove the methylene blue dye from aqueous solutions. The characterization of the adsorbent was performed by FTIR, SEM and color analysis. The influence of pH, contact time, adsorbent dose, initial dye concentration, temperature and ionic strength on the adsorption process were followed. Equilibrium, kinetic, and thermodynamic studies were conducted in order to understand the adsorption process mechanism. Process optimization was performed using the Taguchi method. Sips isotherm and general order kinetic model characterize the adsorption process. The maximum adsorption capacity, 200.4 (mg g^-1), was better compared with other similar bioadsorbents. Thermodynamic parameters indicated that the adsorption process is spontaneous, favorable and endothermic and also that physisorption is involved in the process. The factor with the highest influence on the dye removal process was pH, followed by contact time, temperature, adsorbent dose, ionic strength and initial dye concentration. The obtained results revealed that the bioadsorbent material based on bilberry (Vaccinium myrtillus L.) leaves is highly efficient for cationic dyes removal from aqueous solutions.