Potential Application of Peppermint (Mentha piperita L.), German Chamomile (Matricaria chamomilla L.) and Yarrow (Achillea millefolium L.) as Active Fillers in Natural Rubber Biocomposites

A new methodology for a rapid and high-throughput comparison of molecular profiles and biological activity of phytoextracts

To robustly discover and explore phytocompounds, it is necessary to evaluate the interrelationships between the plant species, plant tissue, and the extraction process on the extract composition and to predict its cytotoxicity. The present work evaluated how Fourier Transform InfraRed spectroscopy can acquire the molecular profile of aqueous and ethanol-based extracts obtained from leaves, seeds, and flowers of Cynara Cardunculus, and ethanol-based extracts from Matricaria chamomilla flowers, as well the impact of these extracts on the viability of mammalian cells. The extract molecular profile enabled to predict the extraction yield, and how the plant species, plant tissue, and extraction process affected the extract's relative composition. The molecular profile obtained from the culture media of cells exposed to extracts enabled to capture its impact on cells metabolism, at a higher sensitivity than the conventional assay used to determine the cell viability. Furthermore, it was possible to detect specific impacts on the cell's metabolism according to plant species, plant tissue, and extraction process. Since spectra were acquired on small volumes of samples (25 µL), after a simple dehydration step, and based on a plate with 96 wells, the method can be applied in a rapid, simple, high-throughput, and economic mode, consequently promoting the discovery of phytocompounds.

Effect of Modified and Unmodified Oak Bark (Quercus Cortex) on the Cross-Linking Process and Mechanical, Anti-Aging, and Hydrophobic Properties of Biocomposites Produced from Natural Rubber (NR)

The study explores the novel use of oak bark (Quercus cortex) as a bio-filler in elastomeric composites, aligning with the global trend of plant-based biocomposites. Both modified and unmodified oak bark were investigated for their impact on the physicochemical properties of natural rubber (NR) composites. The bio-filler modified with n-octadecyltrimethoxysilane exhibited enhanced dispersion and reduced aggregates in the elastomeric matrix. NR composites containing more than 20 phr of unmodified and modified oak bark demonstrated an increased degree of cross-linking (αc > 0.21). Mechanical properties were optimal at 10-15 phr of oak bark and the sample with modified bio-filler (10 phr) achieved the highest tensile strength (15.8 MPa). Silanization and the addition of the bio-filler increased the hardness of vulcanizates. The incorporation of oak bark improved aging resistance at least two-fold due to phenolic derivatives with antioxidant properties. Hydrophobicity decreased with added bark, but silanization reversed the trend, making samples with a high content of oak bark the most hydrophobic (contact angle: 129°). Overall, oak bark shows promise as an eco-friendly, anti-aging filler in elastomeric composites, with modification enhancing compatibility and hydrophobicity.

Neuroprotective potential of Mentha piperita extract prevents motor dysfunctions in mouse model of Parkinson's disease through anti-oxidant capacities

Parkinson's disease (PD) is the second most common neurodegenerative disease in the world. Neurodegeneration of the substantia nigra (SN) and diminished release of dopamine are prominent causes of this progressive disease. The current study aims to evaluate the protective potential of ethanolic extract of Mentha piperita (EthMP) against rotenone-mediated PD features, dopaminergic neuronal degeneration, oxidative stress and neuronal survival in a mouse model. Swiss albino male mice were assigned to five groups: control (2.5% DMSO vehicle), PD (rotenone 2.5 mg/kg), EthMP and rotenone (200mg/kg and 2.5mg/kg, respectively), EthMP (200 mg/kg), and Sinemet, reference treatment containing levodopa and carbidopa (20 mg/kg and rotenone 2.5mg/kg). Behavioral tests for motor functional deficit analysis were performed. Anti-oxidant capacity was estimated using standard antioxidant markers. Histopathology of the mid-brain for neurodegeneration estimation was performed. HPLC based dopamine level analysis and modulation of gene expression using quantitative real-time polymerase chain reaction was performed for the selected genes. EthMP administration significantly prevented the rotenone-mediated motor dysfunctions compared to PD group as assessed through open field, beam walk, pole climb down, stepping, tail suspension, and stride length tests. EthMP administration modulated the lipid peroxidation (LPO), reduced glutathione (GSH), and superoxide dismutase (SOD) levels, as well as glutathione-s-transferase (GST) and catalase (CAT) activities in mouse brain. EthMP extract prevented neurodegeneration in the SN of mice and partially maintained dopamine levels. The expression of genes related to dopamine, anti-oxidant potential and synapses were modulated in M. piperita (MP) extract treated mice brains. Current data suggest therapeutic capacities of MP extract and neuroprotective capacities, possibly through antioxidant capacities. Therefore, it may have potential clinical applications for PD management.

Design and Development of a Topical Nanogel Formulation Comprising of a Unani Medicinal Agent for the Management of Pain

The oil of the Unani medicinal herb Baboona (Matricaria chamomilla) has shown potential in the management of pain. However, predicaments such as poor skin penetration, skin sensitization, liable to degradation, and volatile nature restrict its use. Therefore, our group for the first time has developed a carrier-based delivery system to facilitate the direct application of chamomile oil to the forehead. The developed nanogel was characterized for physical parameters such as compatibility, TEM, and stability studies. Further, it was also evaluated for pH, viscosity, spread ability, and extrudability, as well as through texture analyses, in vitro studies, and skin irritation tests. The formulation was successfully developed with all the necessary attributes. The in vitro studies revealed the enhanced skin penetration of chamomile oil nanogel. The in vivo studies were also performed in chemically induced pain models, mimicking migraine. The studies show significant improvement of the pain threshold for chamomile nanogel when compared to the positive control group and the results were comparable to marketed diclofenac formulations. Finally, the encapsulation into nanogel reduced the skin irritation property. The nanogel formulation showed promising effects in the pain management of migraine.

Medicinal Plants of the Flora of Kazakhstan Used in the Treatment of Skin Diseases

The skin shows the physiological condition of the body's organs and systems that prevent infections and physical damage. Throughout the ages, in folk medicine, phytotherapy was considered a primary form of treatment in all countries, including Kazakhstan, due to the abundance and availability of plant-based remedies. This paper discusses several medicinal plants that are traditionally used in the treatment of skin diseases in the Republic of Kazakhstan. The chemical composition of these plants was analyzed, with a particular focus on the biologically active basic compounds responsible for their therapeutic efficiency in treating skin ailments.

Natural bioactive formulations for biodegradable cotton eco-fabrics with antimicrobial and fire-shielding properties

In this study, eco-friendly cotton fabrics with antimicrobial and flame-retardant properties were produced using newly developed bioactive formulations. The new natural formulations combine the biocidal properties of the biopolymer (chitosan (CS)) and essential oil (thyme oil) (EO) with the flame-retardant properties of mineral fillers (silica (SiO₂), zinc oxide (ZnO), titanium dioxide (TiO₂), and hydrotalcite (LDH)). The modified cotton eco-fabrics were analyzed in terms of morphology (optical and scanning electron microscopy (SEM)), color (spectrophotometric measurements), thermal stability (thermogravimetric analysis (TGA)), biodegradability, flammability (micro-combustion calorimetry (MCC)), and antimicrobial characteristics. The antimicrobial activity of the designed eco-fabrics was determined against different kinds of microorganism (S. aureus, E. coli, P. fluorescens, B. subtilis, A. niger, C. albicans). The antibacterial effects and flammability of the materials were found to depend strongly on the compositions of the bioactive formulation. The best results were obtained for the samples of fabric coated with the formulations containing LDH and TiO₂ filler. These samples showed the highest decreases in flammability, with heat release rate (HRR) values of 168 (W/g) and 139 (W/g), respectively, compared to the reference (233 W/g). The samples also showed very good inhibition of growth against of all the studied bacteria.

Influence of Herbal Fillers Addition on Selected Properties of Silicone Subjected to Accelerated Aging

This work aims to assess the impact of the type and percentage of powdered herbs on selected properties of silicone-based composites. The matrix was an addition cross-linked platinum-cured polydimethylsiloxane. The fillers were powdered thyme and sage, which were introduced at 5, 10, and 15 wt.%. The introduced fillers differed in composition, morphology, and grain size. The grain morphology showed differences in the size and shape of the introduced fillers. The qualitative and quantitative assessment resulting from the incorporation was conducted based on tests of selected properties: density, wettability, rebound resilience, hardness, and tensile strength. The incorporation slightly affected the density and wettability of the silicone. Rebound resilience and hardness results differed depending on the filler type and fraction. However, tensile strength decreased, which may be due to the matrix's distribution of fillers and their chemical composition. Antibacterial activity evaluation against S. aureus proved the bacteriostatic properties of the composites. Accelerated aging in PBS solution further deteriorated the mechanical properties. FTIR and DSC have demonstrated the progressive aging of the materials. In addition, the results showed an overall minimal effect of fillers on the silicone chemical backbone and melting temperature. The developed materials can be used in applications that do not require high mechanical properties.

The Influence of Freeze-Dried Alcohol-Water Extracts from Common Yarrow (Achillea millefolium L.) and German Chamomile (Matricaria chamomilla L.) on the Properties of Elastomer Vulcanizates

This research work aimed to investigate the properties of freeze-dried extracts from Matricaria chamomilla L. and Achillea millefolium L. and to perform a characterization of their impact on the natural rubber-based vulcanizates. First, extracts were prepared in three different solvents at selected volume ratios: water (100), water-methanol (50/50), and water-ethanol (50/50). Next, the freeze-drying of extracts was established and then obtained bio-additives were introduced to the rubber mixtures. Freeze-dried extracts were investigated by UV-VIS diffuse reflectance spectroscopy, Fourier Transform Infrared Spectroscopy (FTIR), Near-Infrared spectroscopy (NIR) and thermogravimetric analysis (TGA). Antioxidant activity and total phenolic content (TPC) were also defined. Rubber mixtures were examined in a rheometer and after vulcanization they were subjected to accelerated simulated aging by UV radiation and thermo-oxidative aging. To determine the resistance of vulcanizates to the degradation processes, the study of cross-linking density (equilibrium swelling method), mechanical properties (tensile strength, elongation at break) and color change were conducted. Performed studies proved the antioxidant activity of freeze-dried extracts caused by the high content of polyphenols and their beneficial influence on the properties of elastomer vulcanizates.

Influence of Clones on Relationship between Natural Rubber and Size of Rubber Particles in Latex

IAN873, Dongfang93114 and Reyan73397, created through vegetative propagation for their high yield and excellent cold resistance, are major clones planted in China. In this work, latexes with rubber particles of the same size from these clones are separated from fresh natural rubber latex, and corresponding rubber films are prepared from each latex. The structure and components of each film are measured. This indicates that the characteristics of the rubbers obtained from latexes with similar particle sizes show some resembling trends among different clones, while for specific samples, those characteristics vary depending on the clone. The molecular weight is generally highest in IAN873 and lowest in Reyan73397. Rubber chains in small rubber particles are longer, and large rubber particles show a wider molecular weight distribution. The gel content of every sample from Reyan73397 is lower than the other two clones. The nitrogen content increases with the size of rubber particles in all clones. The ester content of small rubber particles in IAN873 and Reyan73397 is almost zero. Large rubber particles have more branching points formed via esters. This study provides a new perspective on the influence of clones on the relationship between characteristics of natural rubber and the size of rubber particles in natural rubber latex.

The Impact of the Matricaria chamomilla L. Extract, Starch Solution and the Photoinitiator on Physiochemical Properties of Acrylic Hydrogels

Matricaria chamomilla L. extract is well-known for its therapeutic properties; thus, it shows potential to be used to modify materials designed for biomedical purposes. In this paper, acrylic hydrogels modified with this extract were prepared. The other modifier was starch introduced into the hydrogel matrix in two forms: room-temperature solution and elevated-temperature solution. Such hydrogels were synthesized via UV radiation, while two types of photoinitiator were used: 2-hydroxy-2-methylpropiophenone or phenylbis(2,4,6-trimethylbenzoyl) phosphine oxide. The main task of performed research was to verify the impact of particular modifiers and photoinitiator on physicochemical properties of hydrogels. Studies involved determining their swelling ability, elasticity, chemical structure via FTIR spectroscopy and surface morphology via the SEM technique. Incubation of hydrogels in simulated physiological liquids, studies on the release of chamomile extract from their matrix and their biological analysis via MTT assay were also performed. It was demonstrated that all investigated variables affected the physicochemical properties of hydrogels. The modification of hydrogels with chamomile extract reduced their absorbency, decreased their thermal stability and increased the cell viability incubated with this material by 15%. Next, hydrogels obtained by using phenylbis(2,4,6-trimethylbenzoyl) phosphine oxide as a photoinitiator showed lower absorbency, more compact structure, better stability in SBF and a more effective release of chamomile extract compared to the materials prepared by using 2-hydroxy-2-methylpropiophenone. It was proved that, by applying adequate reagents, including both photoinitiator and modifiers, it is possible to obtain hydrogels with variable properties that will positively affect their application potential.

Antioxidant and Anti–Aging Activity of Freeze–Dried Alcohol–Water Extracts from Common Nettle (Urtica dioica L.) and Peppermint (Mentha piperita L.) in Elastomer Vulcanizates

The research article aimed to examine the antioxidant nature of freeze–dried extracts from Urtica dioica L. and Mentha piperita L. and to present a deep characterization of their influence on the properties of natural rubber–based vulcanizates before and after simulated aging processes. Natural extracts were prepared in three solvent systems at selected volume ratios: water (100), methanol–water (50/50), ethanol–water (50/50), which were further lyophilized and used as additive to natural rubber mixtures. Freeze–dried materials were investigated by UV–VIS diffuse reflectance spectroscopy, Fourier Transform Infrared Spectroscopy (FTIR), thermal stability by thermogravimetric analysis (TGA). Antioxidant activity and total phenolic content (TPC) were also examined. Prepared samples were subjected to accelerated simulated degradation processes by using ultraviolet and thermo-oxidative aging. Vulcanizates resistance to degradation effects was determined by the study of cross-linking density (equilibrium swelling method), mechanical properties (tensile strength, elongation at break) and color change in comparison with the results of the reference samples. The research showed that analyzed extracts are characterized by a high content of polyphenols and antioxidant activity, thus have a protective influence on elastomer vulcanizates against damaging effects of aging processes, which consequently extends the lifetime of materials.

Poly(vinyl alcohol)/Plant Extracts Films: Preparation, Surface Characterization and Antibacterial Studies against Gram Positive and Gram Negative Bacteria

In this study, we aim to obtain biomaterials with antibacterial properties by combining poly(vinyl alcohol) with the extracts obtained from various selected plants from Romania. Natural herbal extracts of freshly picked flowers of the lavender plant (Lavandula angustifolia) and leaves of the peppermint plant (Mentha piperita), hemp plant (Cannabis sativa L.), verbena plant (Verbena officinalis) and sage plant (Salvia officinalis folium) were selected after an intensive analyzing of diverse medicinal plants often used as antibacterial and healing agents from the country flora. The plant extracts were characterized by different methods such as totals of phenols and flavonoids content and UV-is spectroscopy. The highest amounts of the total phenolic and flavonoid contents, respectively, were recorded for Salvia officinalis. Moreover, the obtained films of poly(vinyl alcohol) (PVA) loaded with plant extracts were studied concerning the surface properties and their antibacterial or cytotoxicity activity. The Attenuated Total Reflection Fourier Transform Infrared analysis described the successfully incorporation of each plant extract in the poly(vinyl alcohol) matrix, while the profilometry demonstrated the enhanced surface properties. The results showed that the plant extracts conferred significant antibacterial effects to films toward Staphylococcus aureus and Escherichia coli and are not toxic against fibroblastic cells from the rabbit.

Biopolymer Composites: Synthesis, Properties, and Applications

Petroleum-based plastics can be found everywhere in our habitual life in diverse applications such as automobiles, aerospace, and medical science [...].

Comparison of Aging Resistance and Antimicrobial Properties of Ethylene-Norbornene Copolymer and Poly(Lactic Acid) Impregnated with Phytochemicals Embodied in Thyme (Thymus vulgaris) and Clove (Syzygium aromaticum)

The effects of plant-based extracts on the solar aging and antimicrobial properties of impregnated ethylene-norbornene (EN) copolymer and poly(lactic acid) (PLA) were investigated. In this study, the impregnation yield of polyolefin, lacking in active centers capable of phytochemical bonding, and polyester, abundant in active sides, was measured. Moreover, two different extracts plentiful in phytochemicals-thyme (TE) and clove (CE)-were employed in the solvent-based impregnation process. The effect of thymol and eugenol, the two main compounds embodied in the extracts, was studied as well. Interestingly, oxidation induction times (OIT) for the impregnation of EN with thyme and clove extracts were established to be, respectively, 27.7 and 39.02 min, which are higher than for thymol (18.4 min) and eugenol (21.1 min). Therefore, an aging experiment, mimicking the full spectrum of sunlight, was carried out to investigate the resistance to common radiation of materials impregnated with antioxidative substances. As expected, the experiment revealed that the natural extracts increased the shelf-life of the polymer matrix by inhibiting the degradation processes. The aging resistance was assessed based on detected changes in the materials' behavior and structure that were examined with Fourier-transform infrared spectroscopy, contact angle measurements, color quantification, tensile tests, and hardness investigation. Such broad results of solar aging regarding materials impregnated with thyme and clove extracts have not been reported to date. Moreover, CE was found to be the most effective modifying agent for enabling material with antimicrobial activity against Escherichia coli to be obtained.