Active Materials for 3D Printing in Small Animals: Current Modalities and Future Directions for Orthopedic Applications

3D printed orthopedic prostheses for domestic and wild birds-case reports

Regardless of the species, birds are exposed to injuries that lead to amputation of part of the body structure and often euthanasia. Based on the need for new technologies that improve the quality of life of birds with locomotor problems, the present case reports aimed to describe the development of custom-made three-dimensional (3D) prostheses for domestic and wild birds that suffered amputation or malformation of the hind limb. Using the measurements of the bird, a digital model was created for 3D printing using fused deposition modeling technology (FDM) by the Brazilian company 3D Medicine. In this study we report the use of 3D prosthesis for the rehabilitation of three birds with locomotor disorders in Brazil, the animals adapted to the custom-made prosthesis with an improvement in quality of life, better distribution of body weight, locomotion, and landing. This study describes the development of 3D prostheses for birds in Brazil, the first report of this technology for these species, and the pioneering development of socket prostheses for small birds. 3D prostheses offer a high-efficiency solution to improve the quality of life of animals with amputations and malformations of the hind limbs. In addition, 3D technology provides valuable tools for veterinary medicine, developing custom-made models for the most different anatomical demands of animal patients.

3D Slicer open-source software plug-in for vector-based angle calculation of canine hind limb alignment in computed tomographic images

BACKGROUND

Severe and complex angular limb deformities in dogs require accurate morphological assessment using diagnostic imaging to achieve successful orthopedic surgery. Computed tomography (CT) is commonly used to overcome projection errors in two-dimensional angular measurements of dog hindlimb alignment. Three-dimensional volume rendering (VR) techniques permit virtual positioning and variable projection, but the final CT-image that defines the projection plane for angular measurements remains two-dimensional.

OBJECTIVE

We wanted to develop a true three-dimensional open-source technique to measure the alignments of the hind limbs of dogs in CT scanners.

METHODS

We developed an open-source 3D Slicer plug-in, to perform angular measurements using vector calculations in three-dimensional space. In 113 CT-scans of canine pelvic limbs, femoral torsion, femoral varus, femorotibial rotation, tibial torsion, tibial varus and tibiotalar rotation angles were calculated and compared to an already validated technique using VoXim®.

RESULTS

Reference points were identified and measurements were possible in the 113 acquisitions. The greatest difference between the two techniques was 1.4° at only one tibial torsion angle. Mean values for all Bland-Altman plots did not show significant differences and were less than 0.07° for all comparisons.

DISCUSSION

Based on these results we considered angular measurements of canine hind limb alignment in CT scans using the 3D Slicer extension program sufficiently accurate for clinical orthopedic and surgical purposes in veterinary medicine.

CONCLUSION

With our open-source 3D Slicer extension software, we provide a free accessible tool for veterinary orthopedic surgeons and thus we hope to improve angular measurements in CT-scans of canine hind limb deformities through true three-dimensionality.

3D visualization and printing: An "Anatomical Engineering" trend revealing underlying morphology via innovation and reconstruction towards future of veterinary anatomy

The amalgamation of veterinary anatomy, technology and innovation has led to development of latest technological advancement in the field of veterinary medicine, i.e., three-dimensional (3D) imaging and reconstruction. 3D visualization technique followed by 3D reconstruction has been proven to enhance non-destructive 3D visualization grossly or microscopically, e.g., skeletal muscle, smooth muscle, ligaments, cartilage, connective tissue, blood vessels, nerves, lymph nodes, and glands. The core aim of this manuscript is to document non-invasive 3D visualization methods being adopted currently in veterinary anatomy to reveal underlying morphology and to reconstruct them by 3D softwares followed by printing, its applications, current challenges, trends and future opportunities. 3D visualization methods such as MRI, CT scans and micro-CT scans are utilised in revealing volumetric data and underlying morphology at microscopic levels as well. This will pave a way to transform and re-invent the future of teaching in veterinary medicine, in clinical cases as well as in exploring wildlife anatomy. This review provides novel insights into 3D visualization and printing as it is the future of veterinary anatomy, thus making it spread to become the plethora of opportunities for whole veterinary science.

Translation of nanotechnology-based implants for orthopedic applications: current barriers and future perspective

The objective of bioimplant engineering is to develop biologically compatible materials for restoring, preserving, or altering damaged tissues and/or organ functions. The variety of substances used for orthopedic implant applications has been substantially influenced by modern material technology. Therefore, nanomaterials can mimic the surface properties of normal tissues, including surface chemistry, topography, energy, and wettability. Moreover, the new characteristics of nanomaterials promote their application in sustaining the progression of many tissues. The current review establishes a basis for nanotechnology-driven biomaterials by demonstrating the fundamental design problems that influence the success or failure of an orthopedic graft, cell adhesion, proliferation, antimicrobial/antibacterial activity, and differentiation. In this context, extensive research has been conducted on the nano-functionalization of biomaterial surfaces to enhance cell adhesion, differentiation, propagation, and implant population with potent antimicrobial activity. The possible nanomaterials applications (in terms of a functional nanocoating or a nanostructured surface) may resolve a variety of issues (such as bacterial adhesion and corrosion) associated with conventional metallic or non-metallic grafts, primarily for optimizing implant procedures. Future developments in orthopedic biomaterials, such as smart biomaterials, porous structures, and 3D implants, show promise for achieving the necessary characteristics and shape of a stimuli-responsive implant. Ultimately, the major barriers to the commercialization of nanotechnology-derived biomaterials are addressed to help overcome the limitations of current orthopedic biomaterials in terms of critical fundamental factors including cost of therapy, quality, pain relief, and implant life. Despite the recent success of nanotechnology, there are significant hurdles that must be overcome before nanomedicine may be applied to orthopedics. The objective of this review was to provide a thorough examination of recent advancements, their commercialization prospects, as well as the challenges and potential perspectives associated with them. This review aims to assist healthcare providers and researchers in extracting relevant data to develop translational research within the field. In addition, it will assist the readers in comprehending the scope and gaps of nanomedicine's applicability in the orthopedics field.

The Clinical Use of Osteobiologic and Metallic Biomaterials in Orthopedic Surgery: The Present and the Future

As the area and range of surgical treatments in the orthopedic field have expanded, the development of biomaterials used for these treatments has also advanced. Biomaterials have osteobiologic properties, including osteogenicity, osteoconduction, and osteoinduction. Natural polymers, synthetic polymers, ceramics, and allograft-based substitutes can all be classified as biomaterials. Metallic implants are first-generation biomaterials that continue to be used and are constantly evolving. Metallic implants can be made from pure metals, such as cobalt, nickel, iron, or titanium, or from alloys, such as stainless steel, cobalt-based alloys, or titanium-based alloys. This review describes the fundamental characteristics of metals and biomaterials used in the orthopedic field and new developments in nanotechnology and 3D-printing technology. This overview discusses the biomaterials that clinicians commonly use. A complementary relationship between doctors and biomaterial scientists is likely to be necessary in the future.

Apple Derived Exosomes Improve Collagen Type I Production and Decrease MMPs during Aging of the Skin through Downregulation of the NF-κB Pathway as Mode of Action

Skin ageing is strictly related to chronic inflammation of the derma and the decay of structural proteins of the extracellular matrix. Indeed, it has become common practice to refer to this phenomenon as inflammageing. Biotech innovation is always in search of new active principles that induce a youthful appearance. In this paper, apple-derived nanovesicles (ADNVs) were investigated as novel anti-inflammatory compounds, which are able to alter the extracellular matrix production of dermal fibroblasts. Total RNA sequencing analysis revealed that ADNVs negatively influence the activity of Toll-like Receptor 4 (TLR4), and, thus, downregulate the NF-κB pro-inflammatory pathway. ADNVs also reduce extracellular matrix degradation by increasing collagen synthesis (COL3A1, COL1A2, COL8A1 and COL6A1) and downregulating metalloproteinase production (MMP1, MMP8 and MMP9). Topical applications for skin regeneration were evaluated by the association of ADNVs with hyaluronic-acid-based hydrogel and patches.

Dentin Particulate for Bone Regeneration: An In Vitro Study

The aim of this in vitro study was to investigate the commitment and behavior of dental pulp stem cells (DPSCs) seeded onto two different grafting materials, human dentin particulate (DP) and deproteinized bovine bone matrix (BG), with those cultured in the absence of supplements. Gene expression analyses along with epigenetic and morphological tests were carried out to examine odontogenic and osteogenic differentiation and cell proliferation. Compressive testing of the grafting materials seeded with DPSCs was performed as well. DPSC differentiation into odontoblast-like cells was identified from the upregulation of odontogenic markers (DSPP and MSX) and osteogenic markers (RUNX2, alkaline phosphatase, osteonectin, osteocalcin, collagen type I, bmp2, smad5/8). Epigenetic tests confirmed the presence of miRNAs involved in odontogenic or osteogenic commitment of DPSCs cultured for up to 21 days on DP. Compressive strength values obtained from extracellular matrix (ECM) synthesized by DPSCs showed a trend of being higher when seeded onto DP than onto BG. High expression of VEGF factor, which is related to angiogenesis, and of dentin sialoprotein was observed only in the presence of DP. Morphological analyses confirmed the typical phenotype of adult odontoblasts. In conclusion, the odontogenic and osteogenic commitment of DPSCs and their respective functions can be achieved on DP, which enables exceptional dentin and bone regeneration.

Innovations in Chewable Formulations: The Novelty and Applications of 3D Printing in Drug Product Design

Since their introduction, chewable dosage forms have gained traction due to their ability to facilitate swallowing, especially in paediatric, geriatric and dysphagia patients. Their benefits stretch beyond human use to also include veterinary applications, improving administration and palatability in different animal species. Despite their advantages, current chewable formulations do not account for individualised dosing and palatability preferences. In light of this, three-dimensional (3D) printing, and in particular the semi-solid extrusion technology, has been suggested as a novel manufacturing method for producing customised chewable dosage forms. This advanced approach offers flexibility for selecting patient-specific doses, excipients, and organoleptic properties, which are critical for ensuring efficacy, safety and adherence to the treatment. This review provides an overview of the latest advancements in chewable dosage forms for human and veterinary use, highlighting the motivations behind their use and covering formulation considerations, as well as regulatory aspects.

Engineered 3D-Printed Polyvinyl Alcohol Scaffolds Incorporating β-Tricalcium Phosphate and Icariin Induce Bone Regeneration in Rat Skull Defect Model

The skull defects are challenging to self-heal, and autologous bone graft repair has numerous drawbacks. The scaffolds for the rapid and effective repair of skull defects have become an important research topic. In this study, polyvinyl alcohol (PVA)/β-tricalcium phosphate(β-TCP) composite scaffolds containing icariin (ICA) were prepared through direct-ink three-dimensional (3D) printing technology. β-TCP in the composite scaffold had osteoconductive capability, and the ICA molecule had osteoinductive capacity. The β-TCP and ICA components in the composite scaffold can enhance the capability to repair skull defects. We show that ICA exhibited a slow-release behaviour within 80 days. This behaviour helped the scaffold to continuously stimulate the formation of new bone. The results of in vitro cell compatibility experiments showed that the addition of ICA molecules contributed to the adhesion and proliferation of MC-3T3-E1 cells. The level of alkaline phosphatase secretion demonstrated that the slow release of ICA can promote the osteogenic differentiation of MC-3T3-E1 cells. The introduction of ICA molecules accelerated the in situ bone regeneration in in vivo. It is concluded that the 3D-printed PVA scaffold with β-TCP and ICA has a wide range of potential applications in the field of skull defect treatment.