Lignocellulosic Biomass Waste-Derived Cellulose Nanocrystals and Carbon Nanomaterials: A Review

Carbon quantum dots from carbohydrate-rich residue of birch obtained following lignin-first strategy

Carbon quantum dots (CQDs) were successfully synthesized from carbohydrate-rich residue of birch obtained following the lignin-first strategy. The optical and physicochemical properties of the CQDs were studied, along with their potential for photocatalytic pollutant degradation. By combining solvothermal and chemical oxidation methods, the product yield of CQDs from carbohydrate-rich residue reached 8.1 wt%. Doping nitrogen enhances the graphitization of CQDs and introduces abundant amino groups to the surface, thereby boosted the quantum yield significantly from 8.9 % to 18.7 %-19.3 %. Nitrogen-doped CQDs exhibited efficient photocatalytic degradation of methylene blue, reaching 37 % within 60 min, with a kinetic degradation rate of 0.00725 min-1. This study demonstrates that carbohydrate-rich residue obtained from lignin-first strategy are ideal precursors for synthesizing CQD with high mass yield and quantum yield by combining solvothermal treatment and chemical oxidation methods, offering a novel approach for the utilization of whole biomass components following the lignin-first strategy.

Lipid production from corn straw by cellobiohydrolase and delta-6 desaturase engineered Mucor circinelloides strains under solid state fermentation

Previously, we constructed engineered M. circinelloides strains that can not only utilize cellulose, but also increase the yield of γ-linolenic acid (GLA). In the present study, an in-depth analysis of lipid accumulation by engineered M. circinelloides strains using corn straw was to be explored. When a two-stage temperature control strategy was adopted with adding 1.5% cellulase and 15% inoculum, the engineered strains led to increases in the lipid yield (up to 1.56 g per 100 g dry medium) and GLA yield (up to 274 mg per 100 g dry medium) of 1.8- and 2.3-fold, respectively, compared with the control strain. This study proved the engineered M. circinelloides strains, especially for Mc-C2PD6, possess advantages in using corn straw to produce GLA. This work provided a reference for transformation from agricultural cellulosic waste to functional lipid in one step, which might play a positive role in promoting the sustainable development of biological industry.

Application of Natural Functional Additives for Improving Bioactivity and Structure of Biopolymer-Based Films for Food Packaging: A Review

The global trend towards conscious consumption plays an important role in consumer preferences regarding both the composition and quality of food and packaging materials, including sustainable ones. The development of biodegradable active packaging materials could reduce both the negative impact on the environment due to a decrease in the use of oil-based plastics and the amount of synthetic preservatives. This review discusses relevant functional additives for improving the bioactivity of biopolymer-based films. Addition of plant, microbial, animal and organic nanoparticles into bio-based films is discussed. Changes in mechanical, transparency, water and oxygen barrier properties are reviewed. Since microbial and oxidative deterioration are the main causes of food spoilage, antimicrobial and antioxidant properties of natural additives are discussed, including perspective ones for the development of biodegradable active packaging.

Carbon quantum dots with honeycomb structure: a novel synthesis approach utilizing cigarette smoke precursors

This study presents a novel approach to synthesizing honeycomb carbon quantum dots (CQDs) from cigarette smoke by a hydrothermal process. A comprehensive characterization of these CQDs, conducted through high-resolution transmission electron microscopy (HRTEM), showcases their unique honeycomb structure, with an average particle size of 6.3 nm. Photoluminescence (PL) in CQDs is a captivating phenomenon where these nanoscale carbon structures emit strong blue luminescence at 461 nm upon exposure to ultraviolet light, with their excitation peak occurring at 380 nm. Fourier Transform Infrared (FTIR) analysis also identifies specific functional groups within the CQDs, offering valuable insights into the mechanisms governing their photoluminescence. Analysis of excitation spectra indicates the presence of both aromatic C=C bonds at 254 nm and C-O bonds from 280 to 420 nm.

Polymeric Materials Obtained by Extrusion and Injection Molding from Lignocellulosic Agroindustrial Biomass

This review presents the advances in polymeric materials achieved by extrusion and injection molding from lignocellulosic agroindustrial biomass. Biomass, which is derived from agricultural and industrial waste, is a renewable and abundant feedstock that contains mainly cellulose, hemicellulose, and lignin. To improve the properties and functions of polymeric materials, cellulose is subjected to a variety of modifications. The most common modifications are surface modification, grafting, chemical procedures, and molecule chemical grafting. Injection molding and extrusion technologies are crucial in shaping and manufacturing polymer composites, with precise control over the process and material selection. Furthermore, injection molding involves four phases: plasticization, injection, cooling, and ejection, with a focus on energy efficiency. Fundamental aspects of an injection molding machine, such as the motor, hopper, heating units, nozzle, and clamping unit, are discussed. Extrusion technology, commonly used as a preliminary step to injection molding, presents challenges regarding fiber reinforcement and stress accumulation, while lignin-based polymeric materials are challenging due to their hydrophobicity. The diverse applications of these biodegradable materials include automotive industries, construction, food packaging, and various consumer goods. Polymeric materials are positioned to offer even bigger contributions to sustainable and eco-friendly solutions in the future, as research and development continues.

Design of Bifunctional Nanocatalysts Based on Zeolites for Biomass Processing

Bifunctional catalysts consisting of metal-containing nanoparticles (NPs) and zeolite supports have received considerable attention due to their excellent catalytic properties in numerous reactions, including direct (biomass is a substrate) and indirect (platform chemical is a substrate) biomass processing. In this short review, we discuss major approaches to the preparation of NPs in zeolites, concentrating on methods that allow for the best interplay (synergy) between metal and acid sites, which is normally achieved for small NPs well-distributed through zeolite. We focus on the modification of zeolites to provide structural integrity and controlled acidity, which can be accomplished by the incorporation of certain metal ions or elements. The other modification avenue is the adjustment of zeolite morphology, including the creation of numerous defects for the NP entrapment and designed hierarchical porosity for improved mass transfer. In this review, we also provide examples of synergy between metal and acid sites and emphasize that without density functional theory calculations, many assumptions about the interactions between active sites remain unvalidated. Finally, we describe the most interesting examples of direct and indirect biomass (waste) processing for the last five years.

Production of nanocellulose from corn husk for the development of antimicrobial biodegradable packaging film

Packaging is a potential way of keeping food products safe from various environmental pollutants, and biological, chemical, & physical deterioration. Hence, the demand for an effective antimicrobial active packaging material is increasing tremendously to improve the shelf-life of food products. Thus, we extracted nanocellulose from corn husks and developed a eugenol-incorporated biodegradable antimicrobial active packaging film. The extracted nanocellulose showed a particle size of 149.67 ± 3.56 nm and an overall surface charge of -20.2 mV ± 0.76 V. The film casting method is one of the promising methods to fabricate biodegradable films using plant-based biopolymers. Therefore, different concentrations of eugenol (0.5-5 % v/v) were incorporated to formulate the functional film (FF0.5-FF5) by employing the casting process. FF exhibited comparable tensile strength as compared to the control film (CF), however, FF5 showed the least tensile strength (85 MPa). Based on the mechanical characterization, the FF3 film sample was further selected for characterization. The morphological evaluation revealed that the surface of the film was smooth and non-porous with reduced moisture content and density. The film exhibited high thermal stability as the degradation occurred above 400 °C, indicating the strong hydrogen bonding between the hydroxyl groups of the film. The Fourier transform infrared spectroscopy analysis revealed the existence of COOH vibration and COC stretching groups of cellulose and eugenol. The antimicrobial studies showed high efficacy against Staphylococcus aureus followed by Salmonella typhmurium, Pseudomonas aeruginosa, and Klebsiella pneumoniae bacteria. Overall, eugenol-incorporated nanocellulose-based biodegradable packaging film could be an excellent candidate as an alternative to active packaging material and provide an opportunity for the efficient utilization of corn husk.

Application of cellulose nanocrystals in water treatment membranes: A review

Nanomaterials have brought great changes to human society, and development has gradually shifted the focus to environmentally friendly applications. Cellulose nanocrystals (CNCs) are new one-dimensional nanomaterials that exhibit environmental friendliness and ensure the biological safety of water environment. CNCs have excellent physical and chemical properties, such as simple preparation process, nanoscale size, high specific surface area, high mechanical strength, good biocompatibility, high hydrophilicity and antifouling ability. Because of these characteristics, CNCs are widely used in ultrafiltration membranes, nanofiltration membranes and reverse osmosis membranes to solve the problems hindering development of membrane technology, such as insufficient interception and separation efficiency, low mechanical strength and poor antifouling performance. This review summarizes recent developments and uses of CNCs in water treatment membranes and discusses the challenges and development prospects of CNCs materials from the perspectives of ecological safety and human health by comparing them with traditional one-dimensional nanomaterials.