Collagen-Based Osteogenic Nanocoating of Microrough Titanium Surfaces

Engineering a microparticle-loaded rough membrane for guided bone regeneration modulating osteoblast response without inducing inflammation

Guided bone regeneration (GBR) is a widely used procedure that prevents the fast in-growth of soft tissues into bone defect. Among the different types of membranes, the use of collagen membranes is the gold standard. However, these membranes are implanted in tissue location where a severe acute inflammation will occur and can be negatively affected. The aim of this study was to develop a collagen-based membrane for GBR that incorporated alginate-hydroxyapatite microparticles. Membranes were manufactured using collagen type I and gelatin and alginate-hydroxyapatite microparticles. Membranes were assessed in terms of topography by scanning electron microscopy and confocal microscopy; stability by swelling after an overnight incubation in saline and enzymatic degradation against collagenase and mechanical properties by tensile tests. Furthermore, the biological response was assessed with SaOs-2 cells and THP-1 macrophages to determine alkaline phosphatase activity and inflammatory cytokine release. Our results showed that the incorporation of different percentages of these microparticles could induce changes in the surface topography. When the biological response was analyzed, either membranes were not cytotoxic to THP-1 macrophages or to SaOs-2 cells and they did not induce the release of pro-inflammatory cytokines. However, the different surface topographies did not induce changes in the macrophage morphology and the release of pro- and anti-inflammatory cytokines, suggesting that the effect of surface roughness on macrophage behavior could be dependent on other factors such as substrate stiffness and composition. Collagen-gelatin membranes with embedded alginate-hydroxyapatite microparticles increased ALP activity, suggesting a positive effect of them on bone regeneration, remaining unaffected the release of pro- and anti-inflammatory cytokines.

Effects of collagen modification on the osteogenic performance of different surface-modified titanium samples in vitro

OBJECTIVES

The aim of this study was to evaluate the effects of collagen modification on the osteogenic performance of different surface-modified titanium, including alkaline etching, alkaline etching followed by silanization, and alkaline etching followed by dopamine modification. The proliferation, adhesion, and osteogenic differentiation abilities of MC3T3-E1 cells on the surfaces with collagen modification were analyzed and compared.

METHODS

Collagen was immobilized on the surfaces of pure titanium (Ti-C), alkaline-etched titanium (Ti-Na-C), alkaline-etched and silanized titanium (Ti-A-C), and alkaline-etched and dopamine-modified titanium (Ti-D-C), with pure titanium (Ti) as the control group. The surface morphology was observed by scanning electron microscopy (SEM), and the surface elemental composition was analyzed by X-ray photoelectron spectroscopy (XPS). Contact angle measurements were conducted to evaluate the hydrophilicity of the surfaces. MC3T3-E1 cells were cultured on the surfaces, and their proliferation, adhesion, and osteogenic differentiation abilities were assessed using CCK-8 assay, laser scanning confocal microscope, alkaline phosphatase (ALP) staining, Alizarin red staining and quantitative analysis, as well as real-time quantitative polymerase chain reaction (RT-qPCR) to evaluate the mRNA expression levels of osteogenic-related genes, including ALP, typeⅠcollagen (COL-1), osteocalcin (OCN), osteopontin (OPN).

RESULTS

SEM and XPS results confirmed the successful immobilization of collagen on the titanium surfaces, with the Ti-Na-C group exhibiting a higher amount of collagen modification. Contact angle measurements showed improved hydrophilicity of the surfaces after collagen modification. CCK-8 results indicated good compatibility of the materials with MC3T3-E1, with enhanced cell proliferation on the collagen-modified surfaces. Cell fluorescence staining revealed better cell spreading on the collagen-modified surfaces, and ALP and Alizarin red staining results suggested that the Ti-Na-C group exhibited the best osteogenic performance, with significantly higher absorbance values in the Alizarin red quantification analysis. RT-qPCR analysis showed that the Ti-Na-C group had the highest expression of the osteogenic-related gene OPN.

CONCLUSIONS

Among the different collagen modification approaches employed in this study, collagen modification on alkaline-etched titanium surfaces showed the most conducive effects on MC3T3-E1 cell adhesion, spreading, proliferation, and osteogenic differentiation. This approach can be considered as the optimal collagen modification strategy for enhancing osteogenesis on titanium surfaces.

The Effect of Antibacterial-Osteogenic Surface Modification on the Osseointegration of Titanium Implants: A Static and Dynamic Strategy

Titanium (Ti) and its alloys are widely used biomaterials in bone repair. Although these biomaterials possess stable properties and good biocompatibility, the high elastic modulus and low surface activity of Ti implants have often been associated with infection, inflammation, and poor osteogenesis. Therefore, there is an urgent need to modify the surface of Ti implants, where changes in surface morphology or coatings loading can confer specific functions to help them adapt to the osseointegration formation phase and resist bacterial infection. This can further ensure a healthy microenvironment for bone regeneration as well as the promotion of immunomodulation, angiogenesis, and osteogenesis. Therefore, in this review, we evaluated various functional Ti implants after surface modification, both in terms of static modifications and dynamic response strategies, mainly focusing on the synergistic effects of antimicrobial activities and functionalized osteogenic. Finally, the current challenges and future perspectives are summarized to provide innovative and effective solutions for osseointegration and bone defect repair.

Histological and Immunohistochemical Evaluation of Rh-BMP2: Effect on Gingival Healing Acceleration and Proliferation of Human Epithelial Cells

This study aims to histologically and immunohistochemically evaluate the effect recombinant human bone morphogenetic protein (rh-BMP2) injected in gingival tissue has on the acceleration of the epithelial migration from the wound edges and epithelial cell proliferation after implant surgery.

MATERIAL AND METHODS

The study includes 20 patients who underwent bilateral implant surgeries in the premolar-molar region of the mandible, followed by guided bone regeneration. Each patient received an implant in both locations, but rh-BMP2 was only on the right side. At 9 days from the surgery, a gingival biopsy was performed 3 mm distally to the last implant. In total, 20 samples were collected from the left side (control group #1) and 20 from right (test group #1). This was repeated at a 4-month interval during healing abutment placements. Tissues were processed and stained with hematoxylin-eosin and then immunohistochemically for the expression of Ki-67 and further histological examination.

RESULT

Complete closure of the epithelium with new cell formation was observed in the 55% test group and 20% control group after 9 days. At 4 months, although 100% samples of all groups had complete epithelial closure, the test group showed that the epithelial cells were more organized and mature due to the increased number of blood vessels. The average number of new epithelial cells was 17.15 ± 7.545 and 16.12 ± 7.683 cells per mm in test group, respectively, at 9 days and 4 months and 10.99 ± 5.660 and 10.95 ± 5.768 in control groups.

CONCLUSION

Evident from histological observations, rh-BMP-2 can accelerate the closure of gingival wounds, the healing process of epithelial gingival tissue, and the formation of epithelial cells in patients undergoing dental implant treatment.

The Effect of the Topmost Layer and the Type of Bone Morphogenetic Protein-2 Immobilization on the Mesenchymal Stem Cell Response

Recombinant human bone morphogenetic protein-2 (rhBMP-2) plays a key role in the stem cell response, not only via its influence on osteogenesis, but also on cellular adhesion, migration, and proliferation. However, when applied clinically, its supra-physiological levels cause many adverse effects. Therefore, there is a need to concomitantly retain the biological activity of BMP-2 and reduce its doses. Currently, the most promising strategies involve site-specific and site-directed immobilization of rhBMP-2. This work investigated the covalent and electrostatic binding of rhBMP-2 to ultrathin-multilayers with chondroitin sulfate (CS) or diazoresin (DR) as the topmost layer. Angle-resolved X-ray photoelectron spectroscopy was used to study the exposed chemical groups. The rhBMP-2 binding efficiency and protein state were studied with time-of-flight secondary ion mass spectrometry. Quartz crystal microbalance, atomic force microscopy, and enzyme-linked immunosorbent assay were used to analyze protein–substrate interactions. The effect of the topmost layer was tested on initial cell adhesion and short-term osteogenesis marker expression. The results show the highest expression of selected osteomarkers in cells cultured on the DR-ended layer, while the cellular flattening was rather poor compared to the CS-ended system. rhBMP-2 adhesion was observed only on negatively charged layers. Cell flattening became more prominent in the presence of the protein, even though the osteogenic gene expression decreased.