Effects of Acidic Environments on Dental Structures after Bracket Debonding

Zirconia Implants Indicated Better Stability After Exposure to Radioiodine-131 Therapy Used for Differentiated Thyroid Cancer

Background: Advancements in therapeutic approaches and standard medical interventions have significantly improved the prognosis of patients with differentiated thyroid cancer. However, uncertainties remain regarding the optimal timing and protocols for dental implant placement in patients undergoing radioiodine-131 (I-131) therapy. Debates continue about the potential effects of radiation on osseointegration dynamics and implant viability. This in vitro study assessed the impact of radiodiodine-131 (I-131) used for differentiated thyroid cancer on the structure of zirconia and titanium implants. Methods: A total of 60 implants were utilized, with distribution into two cohorts: titanium implants (Ti, n = 30) and zirconia implants (Zr, n = 30). Subsequently, the Ti and Zr implants were immersed in I-131 solution and retrieved at specified time intervals: 0, 6, 12, 24, 48 h, and 8 days post irradiation. The analyses used to characterize the structure of the implants were radioactivity, scanning electron microscopy, atomic force microscopy, roughness, and Vickers hardness assessment. Results: The findings indicate that the zirconia implants exhibited minimal ultra-structural topographic changes after irradiation. Notable topographical changes and debris deposition on zirconia surfaces became evident after 24 h, with cumulative effects observed after 192 h. The titanium implants, on the other hand, showed surface alterations beginning at 12 h of exposure. Significant changes, including erosive patterns and substantial debris deposits, occurred after 48 and 192 h, leading to increased surface roughness by 24 h. Implants exposed for 12 and 24 h formed a statistically significant group, indicating the onset of surface alteration accumulation. The erosion debris confirmed the surface alterations induced by radioiodine-131 exposure. Conclusions: Overall, the Zr implants demonstrated greater stability compared to the Ti implants following radioiodine-131 exposure.

A Comparative Analysis of Enamel Surface Roughness Following Various Interproximal Reduction Techniques: An Examination Using Scanning Electron Microscopy and Atomic Force Microscopy

Interproximal enamel reduction (IER) is a minimally invasive therapeutic procedure commonly used in orthodontics to address both functional and aesthetic issues. Its mechanical effects on enamel surfaces induce the formation of grooves, furrows, scratches, depressions, and valleys. The aim of this study was to assess the enamel surface roughness resulting after the application of currently available methods for interproximal reduction. Ninety freshly extracted human teeth were divided into six groups and subjected to the stripping procedure, using a different method for each group (diamond burs, abrasive strips of 90 μm, 60 μm, 40 μm, 15 μm, and abrasive discs). A single individual performed stripping according to the manufacturer's recommendations, involving interproximal reduction on one tooth's proximal face and leaving the other side untreated. Qualitative and quantitative assessment of the enamel surfaces was carried out using Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM), obtaining 2D and volumetric 3D images of the enamel surface microstructure and nanostructure. The study found that diamond burs and abrasive strips of 60 μm and 90 μm increased enamel roughness due to intense de-structuring effects, while the 40 μm polisher had a gentler effect and 15 μm abrasive strips and polishing discs preserved enamel surface quality and removed natural wear traces.

Formulation and Characterization of New Experimental Dental Composites with Zirconium Filling in Different Forms

Short glass fibers are generally used in posterior dental restorations to enhance the mechanical properties and improve the material microstructure. Two resin-based composites (S0 and SF) were formulated and characterized to investigate the influence of zirconium in their characteristics and properties. The organic part of the investigated materials was the same (BisGMA, TEGDMA, and a photochemical polymerization system), and in the inorganic part, besides quart, glassA, and hydroxylapatite with Zn, sample S0 contained strontium glass with zirconium and sample SF contained fiber powder of chopped zirconium. The samples were characterized by the degree of conversion (DC), mechanical properties, water sorption (WS), scanning electron microscopy (SEM), atomic force microscopy (AFM) before and after the WS test, and antimicrobial properties. The results obtained were subjected to one-way ANOVA and Tukey's statistical tests. Both samples had a high DC. Regarding the mechanical properties, both samples were very similar, except DTS, which was higher for the composite without fibers. After 14 days, the WS value of the SF sample was lower than that of the S0 sample. Water caused significant changes in the topography of the SF sample, but thanks to its antimicrobial properties and the diffusion phenomenon, SF had a more pronounced antimicrobial effect. This study shows that the addition of appropriate amounts of Sr-Zr-glass powder gives the material in which it is added similar properties to material containing chopped zirconium glass fiber powder. According to the antimicrobial test results, resin composites containing experimental zirconia fillings can be considered in future in vitro clinical studies for posterior reconstructions with significantly improved mechanical properties.

Effectiveness of fluoride mouthrinse in prevention of demineralization during fixed orthodontic treatment: A systematic review and meta-analysis

Enamel demineralization is a very common occurrence around bonded brackets in an orthodontic practice. Fluoride (FLR) applications have been used to prevent decalcification and further progression of white spot lesions. The purpose of this systematic review and meta-analysis was to systematically appraise available literature on the effectiveness of fluoride mouthrinse in the prevention of demineralization around fixed orthodontic appliances. A search was conducted for randomized controlled clinical trials among four electronic databases (MEDLINE, Google Scholar, PubMed, and Cochrane Review) through MeSH terms and keywords. Studies were excluded if random allocation was not conducted, or if they were animal or in vitro studies. About 146 articles were screened and 5 studies were selected for the present review. Only two studies were selected for MA due to variations in the measurement of outcomes among studies. This review concluded that rinsing with FLR in the course of the fixed orthodontic treatment lessens demineralization around the bracket. Using FLR mouthrinse to inhibit the formation of white spot lesions or dental caries in patients with multiple cavities or restoration can be considered in clinical practice.

Morphology, Cytotoxicity, and Antimicrobial Activity of Electrospun Polycaprolactone Biomembranes with Gentamicin and Nano-Hydroxyapatite

The aim of this research is to develop new nanocomposite membranes (NMs) for guided bone regeneration from polycaprolactone (PCL), with different concentrations of gentamicin sulfate (GEN) and nano-hydroxyapatite (nHAP) through electrospinning. The obtained NMs were characterized for structure through SEM and AFM, which revealed the influence of GEN and nHAP on the fiber diameter. The addition of GEN lowered the fiber diameter, and the addition of nHAP increased the diameter of the fibers. The NMs demonstrated antibacterial properties against P. aeruginosa, S. aureus, B. cereus, and E. coli depending on the drug concentration, while being negligibly affected by the nHAP content. NM cytotoxicity assessment, performed once using the MTT assay, revealed no cytotoxicity. The developed NMs could be a promising alternative for guided bone regeneration.

Comparison of the Eggshell and the Porcine Pericardium Membranes for Guided Tissue Regeneration Applications

Guided bone regeneration is frequently used to reconstruct the alveolar bone to rehabilitate the mastication using dental implants. The purpose of this article is to research the properties of eggshell membrane (ESM) and its potential application in tissue engineering. The study focuses on the structural, mechanical, and histological characteristics of ESM extracted from Gallus domesticus eggs and to compare them to a commercially available porcine pericardium membrane (Jason® membrane, botiss biomaterials GmbH, Zossen, Germany). Thus, histology was performed on the ESM, and a comparison of the microstructure through scanning electron microscopy and atomic force microscopy (AFM) was conducted. Also, mechanical tensile strength was evaluated. Samples of ESM were prepared and treated with alcohol for fixation and disinfection. Histological analysis revealed that the ESM architecture is constituted out of loose collagen fibers. However, due to the random arrangement of collagen fibers within the membrane, it might not be an effective barrier and occlusive barrier. Comparative analyses were performed between the ESM and the AFM examinations and demonstrated differences in the surface topography and mechanical properties between the two membranes. The ESM exhibited rougher surfaces and weaker mechanical cohesion attributed to its glycoprotein content. The study concludes that while the ESM displays favorable biocompatibility and resorb ability, its non-uniform collagen arrangement limits its suitability as a guided bone regeneration membrane in the current non-crosslinked native form. Crosslinking techniques may enhance its properties for such applications. Further research is needed to explore modifications and processing methods that could leverage the ESM's unique properties for tissue engineering purposes.

Development and Characterization of Polylactic Acid (PLA)-Based Nanocomposites Used for Food Packaging

The present study is focused on polylactic acid (PLA) blending with bio nanoadditives, such as Tonsil^® (clay) and Aerosil^®, to obtain nanocomposites for a new generation of food packaging. The basic composition was enhanced using Sorbitan oleate (E494) and Proviplast as plasticizers, increasing the composite samples' stability and their mechanical strength. Four mixtures were prepared: S1 with Tonsil^®; S2 with Aerosil^®; S3 with Aerosil^® + Proviplast; and S4 with Sabosorb. They were complexly characterized by FT-IR spectroscopy, differential scanning calorimetry, mechanical tests on different temperatures, and absorption of the saline solution. FTIR shows a proper embedding of the filler component into the polymer matrix and DSC presents a good stability at the living body temperature for all prepared samples. Micro and nanostructural aspects were evidenced by SEM and AFM microscopy, revealing that S3 has the most compact and uniform filler distribution and S4 has the most irregular one. Thus, S3 evidenced the best diametral tensile strength and S4 evidenced the weakest values. All samples present the best bending strength at 18 °C and fair values at 4 °C, with the best values being obtained for the S1 sample and the worst for S4. The lack of mechanical strength of the S4 sample is compensated by its best resistance at liquid penetration, while S1 is more affected by the liquid infiltrations. Finally, results show that PLA composites are suitable for biodegradable and disposable food packages, and the desired properties could be achieved by proper adjustment of the filler proportions.

Chemical and Structural Assessment of New Dental Composites with Graphene Exposed to Staining Agents

Among the newest trends in dental composites is the use of graphene oxide (GO) nanoparticles to assure better cohesion of the composite and superior properties. Our research used GO to enhance several hydroxyapatite (HA) nanofiller distribution and cohesion in three experimental composites CC, GS, GZ exposed to coffee and red wine staining environments. The presence of silane A-174 on the filler surface was evidenced by FT-IR spectroscopy. Experimental composites were characterized through color stability after 30 days of staining in red wine and coffee, sorption and solubility in distilled water and artificial saliva. Surface properties were measured by optical profilometry and scanning electron microscopy, respectively, and antibacterial properties wer e assessed against Staphylococcus aureus and Escherichia coli. A colour stability test revealed the best results for GS, followed by GZ, with less stability for CC. Topographical and morphological aspects revealed a synergism between GZ sample nanofiller components that conducted to the lower surface roughness, with less in the GS sample. However, surface roughness variation due to the stain was affected less than colour stability at the macroscopic level. Antibacterial testing revealed good effect against Staphylococcus aureus and a moderate effect against Escherichia coli.

Recent Advances in Synthesis, Characterization and Applications of Innovative Materials in Removal of Water Contaminants

Water is a scarce resource with a close and intricate nexus with energy [...].