Comparative Study of Complexes of Rare Earths and Actinides with 2,6-Bis(1,2,4-triazin-3-yl)pyridine

Transformation of Mononuclear Plutonium(III) Tetrazolate Complexes into Dinuclear Complexes in the Solid State

The salt metathesis reaction of Na(pmtz)·H2O [pmtz- = 5-(pyrimidyl)tetrazolate] and PuBr3·nH2O in an aqueous media leads to the formation of the mononuclear compound [Pu(pmtz)3(H2O)3]·(3 + n) H2O (Pu1, n = ∼8) that is isotypic with the lanthanide compounds [Ln(pmtz)3(H2O)3]·(3 + n) H2O (Ln = Ce-Nd). Dissolution and recrystallization of Pu1 in water yields the dinuclear compound {[Pu(pmtz)2(H2O)3]2(μ-pmtz)}2(pmtz)2·14H2O (Pu2), which is isotypic with the lanthanide compounds {[Ln(pmtz)2(H2O)3]2(μ-pmtz)}2(pmtz)2·14H2O (Ln = Nd and Sm). Like their nine-coordinate ionic radii, the M-O and M-N bond lengths in Pu1/Pu2 and Nd1/Nd2, respectively, are within error of one another. The Laporte-forbidden 4f → 4f and 5f → 5f transitions are also assigned in the UV-vis-NIR spectra for these f-element tetrazolate coordination compounds.

Sensing and extraction of hazardous metals by di-phosphonates of heterocycles: a combined experimental and theoretical study

In this study, pyridine and phenanthroline diphosphonate ligands were investigated for the first time from the context of solvent extraction and potentiometric sensing of Co(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II) cations. The extraction efficiency under the same conditions for phenanthroline-diphosphonates is considerably higher than that for pyridine ligands. At the same time, the pyridine-diphosphonates show pronounced selectivity towards lead in this metal series. The extraction systems with phenanthroline diphosphonates provided the most efficient extraction of Cd(II) and Pb(II) cations (D > 90). The newly developed pyridine and phenanthroline diphosphonate ligands have proven to be highly effective components in plasticized polymeric membranes. These ligands can be utilized to construct potentiometric ion sensors that exhibit a notable response specifically towards Pb(II) cations. Among the previously reported tetradentate ligands, the phenanthroline diphosphonate ligand, when incorporated into plasticized polymeric membranes, demonstrated the highest sensitivity towards d-metals and Pb(II). The structure of the single crystal complex of Pb(II) and Cd(II) with pyridine-diphosphonates was studied by X-ray diffraction analysis (XRD). The geometry of Cu(II), Zn(II), Cd(II) and Pb(II) complexes and the energy effect of the complex formation, including pseudo-oligomerization reactions, were determined by DFT calculations. The high sensing and extraction efficiency of diphosphonates with respect to Pb(II) is consistent with the minimum values of complex formation energies. The variation in sensory and extraction properties observed among the studied diphosphonate ligands is influenced by the ability to form polynuclear complexes with Pb(II) cations, whereas such properties are absent in the case of Cd(II) cations.

Gold-Based Coronands as Hosts for M3+ Metal Ions: Ring Size Matters

The controlled, self-assembled synthesis of multinuclear coordination compounds can be performed via different approaches. Frequently, steric, geometric and/or electronic factors located at the ligand systems predefine the way in which metal ions can assemble them to large aggregates. For the compounds in the present paper, also the Pearson's acidities and preferred coordination geometries of the metal ions were used as organization principles. The ligand under study, 2,6-dipicolinoylbis(N,N-diethylthiourea), H₂L1^ethyl, possesses 'soft' sulfur and 'hard' nitrogen and oxygen donors. One-pot reactions of this compound with [AuCl(tht)] (tht = tetrahydrothiophene) and M³⁺ salts (M = Sc, Y, La, Ln, Ga, In) give products with gold-based {Au₃(L1^ethyl)₃}³⁺ or {Au₂(L1^ethyl)₂}²⁺ coronands, which host central M³⁺ ions. The formation of such units is templated by the M³⁺ ions and the individual size of the coronand rings is dependent on the ionic radii of the central ions in a way that small ions such as Ga³⁺ form a [Ga⊂{Au₂(L1^ethyl)₂}]⁺ assembly, while larger ions (starting from Sc³⁺/In³⁺) establish neutral [M⊂{Au₃(L1^ethyl)₃}] units with nine-coordinate central ions.

Size Selectivity in Heterolanthanide Molecular Complexes with a Ditopic Ligand

The similar reactivity of lanthanides generally leads to statistically populated polynuclear complexes, making the rational design of ordered hetero-lanthanide compounds extremely challenging. Here we report on the site selectivity in hetero-lanthanide tetranuclear complexes afforded by the relatively simple ditopic pyterpyNO ligand (4'-(4-pyridil)-2,2':6',2"-terpyridine N-oxide). The sequential room temperature reaction of RE₂ (tta)₆ (pyterpyNO)₂ (where RE=Y, (1); Eu, (2), Dy, (3) Htta=2-thenoyltrifluoroacetone) with La(tta)₃ dme (dme=dimethoxyethane) yielded Y₂ La₂ (tta)₁₂ (pyterpyNO)₂ (4), Dy₂ La₂ (tta)₁₂ (pyterpyNO)₂ (5) and Eu₂ La₂ (tta)₁₂ (pyterpyNO)₂ (6). Single crystals X-ray diffraction studies showed that 4, 5 and 6 are isostructural, featuring a tetranuclear structure with two different metal coordination sites with coordination numbers 8 (CN8) and 9 (CN9). The two smaller cations are mainly bridged by the O-donor atoms of the NO groups of two pyterpyNO ligands (CN8), while the larger lanthanum centres are bound by a terpyridine unit (CN9). Size selectivity has been studied with structural and magnetic studies in the solid state and through ¹⁹ F NMR and photoluminescence studies in solution, showing a direct dependence on the difference of ionic radii of the ions and yielding a 91 % selectivity for 4. Furthermore, ¹⁹ F NMR, X-ray and PL studies pointed out that the nature of the product is independent from the synthetic route for compound Eu₂ Y₂ (tta)₁₂ (pyterpyNO)₂ (7), keeping the ion selectivity also for a self-assembly reaction. Unexpectedly, these studies have evidenced that selectivity is not exclusively governed by electrostatic interactions related to size dimensions.

N-oxide ligands for selective separations of lanthanides: insights from computation

Preorganized ligands such as bis-lactam-1,10-phenanthroline (BLPhen) show unique selectivity trends across the lanthanide series, indicating the synergistic effects of both N and O donors in complexing with lanthanides. We hypothesize that by replacing amide functional groups with an N-oxide functionality would open the door to new ligand architectures with improved selectivities. To test this idea, we computationally examined mixed N,O-donor ligands containing pyridinic N and N-oxide groups and evaluated their relative aqueous La(iii)/Ln(iii) selectivity by computing free energy changes for the exchange reaction between the designed ligands and a reference ligand. Three novel ligands show promise as excellent extractant agents in selectively separating trivalent lanthanides. The extent of conjugation (and hyperconjugation), the complex geometry, and the electron accumulations on the two O-donors of the N-oxide groups are found to be important factors in dictating the selectivity trends.

Advancing Rare-Earth Separation by Machine Learning

Constituting the bulk of rare-earth elements, lanthanides need to be separated to fully realize their potential as critical materials in many important technologies. The discovery of new ligands for improving rare-earth separations by solvent extraction, the most practical rare-earth separation process, is still largely based on trial and error, a low-throughput and inefficient approach. A predictive model that allows high-throughput screening of ligands is needed to identify suitable ligands to achieve enhanced separation performance. Here, we show that deep neural networks, trained on the available experimental data, can be used to predict accurate distribution coefficients for solvent extraction of lanthanide ions, thereby opening the door to high-throughput screening of ligands for rare-earth separations. One innovative approach that we employed is a combined representation of ligands with both molecular physicochemical descriptors and atomic extended-connectivity fingerprints, which greatly boosts the accuracy of the trained model. More importantly, we synthesized four new ligands and found that the predicted distribution coefficients from our trained machine-learning model match well with the measured values. Therefore, our machine-learning approach paves the way for accelerating the discovery of new ligands for rare-earth separations.

Breakdown Properties of Cables with Different Inorganic, Insulating Nanomaterials

The insulation performance of cable insulating materials can be optimised via matrix modification. Typically, low-density polyethylene (LDPE) is used as the matrix, and a certain proportion of nanoparticles are added to this matrix. To explore the effects of nanoparticles with different forms on the structural interface and crystal morphology of the material, nano-MMT and nano-ZnO were added to LDPE, and comparative experiments were carried out. Based on microscopic test results, material insulation performance changes before and after optimisation were observed. Then, simulation cable models with different insulating materials were developed. Based on the simulated electrical measurements, the thermal breakdown performance of the different insulating materials was tested. According to infrared stereo vision detection results, anomalous temperature points in the cables can be located accurately. Finally, based on macroscopic test results, we verified whether the inorganic, insulating nanomaterials meet the requirements for high-voltage transmission.

Prediction of An(III)/Ln(III) Separation by 1,2,4-Triazinylpyridine Derivatives

The effect of frustrated Lewis donors on metal selectivity between actinides and lanthanides was studied using a series of novel organic ligands. Structures and thermodynamic energies were predicted in the gas phase, in water, and in butanol using 9-coordinate, explicitly solvated (H₂O) Eu, Gd, Am, and Cm in the +III oxidation state as reactants in the formation of complexes with 2-(6-[1,2,4]-triazin-3-yl-pyridin-2-yl)-1H-indole (Core 1), 3-[6-(2H-pyrazol-3-yl)pyridin-2-yl]-1,2,4-triazine (Core 2), and several derivatives. These complexations were studied using density functional theory (DFT) incorporating scalar relativistic effects on the actinides and lanthanides using a small core pseudopotential and corresponding basis set. A self-consistent reaction field approach was used to model the effect of water and butanol as solvents. Coordination preferences and metal selectivity are predicted for each ligand. Several ligands are predicted to have a high degree of selectivity, particularly when a low ionization potential in the ligand permits charge transfer to Eu(III), reducing it to Eu(II) and creating a half-filled f⁷ shell. Reasonable separation is predicted between Cm(III) and Gd(III) with Core 1 ligands, possibly due to ligand donor frustration. This separation is largely absent from Core 2 ligands, which are predicted to lose their frustration due to proton transfer from the 2N to the 3N position of the pyrazole component of the ligands via tautomerization.

Theoretical Study of Effects of Solvents, Ligands, and Anions on Separation of Trivalent Lanthanides and Actinides

Due to its associated low CO₂ emissions, nuclear energy production is rapidly growing. In this context, the treatment of high-level liquid waste (HLLW) of nuclear plants is of high concern to both scientific and industrial communities. Specifically, the separation of An(III) and Ln(III) cations when processing nuclear fuel is a vitally important, yet challenging, step within HLLW because An(III) and Ln(III) have similar chemical properties in solution. To guide the choice of relevant ligands, anions, and solvents for this separation step, in this work, we calculate and compare the free energy of formation of different Am(III) and Eu(III) complexes (which are typical and important An(III) and Ln(III) cation examples), involving two different ligands and three different counter ions in four different solvents. Based on our calculations, we predict that the chosen solvent is a key factor in the extraction of Am(III) and Eu(III) in treatment of HLLW. This study supports a systematic, computation-assisted screening of solvents and extractive ligands with counter anions as a proficient method to optimize the separation of Ln(III) and An(III).

Tris-{Hydridotris(1-pyrazolyl)borato}lanthanide Complexes: Synthesis, Spectroscopy, Crystal Structure and Bonding Properties

Complexes of trivalent lanthanides (Ln) with the hydridotris(1-pyrazolyl)borato (Tp) ligand Ln[η3-HB(N2C3H3)3]3 (LnTp3) were subjected to a joint experimental–theoretical analysis. X-ray diffraction experiments have been performed on CeTp3, NdTp3, SmTp3, GdTp3, and TbTp3 in the nine-fold coordination and on DyTp3, HoTp3, ErTp3, TmTp3, YbTp3, and LuTp3 in the eight-fold coordination form. Density functional theory (DFT) calculations were carried out for all 15 LnTp3 complexes. They extended the X-ray diffraction data available on the LnTp3 compounds and facilitated a straightforward interpretation of trends in the structural parameters. As a result of the joint analysis, significant steric strain in the equatorial coordination sites of the nine-coordinate structures was recognized. Trends in the bonding properties were elucidated by energy decomposition and quantum theory of atoms in molecules (QTAIM) analysis of the electron density distribution. These results revealed the major electrostatic character of the Ln…Tp bonding and fine variation of charge transfer effects across the Ln row.

Series of Tetravalent Actinide Amidinates: Structure Determination and Bonding Analysis

Two series of isostructural tetravalent actinide amidinates [AnX((S)-PEBA)₃] (An = Th, U, Np; X = Cl, N₃) bearing the chiral (S,S)-N,N'-bis(1-phenylethyl)benzamidinate ((S)-PEBA) ligand have been synthesized and thoroughly characterized in solid and in solution. This study expands the already reported tetravalent neptunium complexes to the lighter actinides thorium and uranium. Furthermore, a rare Ce(IV) amidinate [CeCl((S)-PEBA)₃] was synthesized to compare its properties to those of the analogous tetravalent actinide complexes. All compounds were characterized in the solid state using single-crystal XRD and infrared spectroscopy and in solution using NMR spectroscopy. Quantum chemical bonding analysis including also the isostructural Pa and Pu complexes was used to characterize the covalent contributions to any bond involving the metal cation. Th shows the least covalent character throughout the series, even substantially smaller than for the Ce complex. For U, Np, and Pu, similar covalent bonding contributions are found, but a natural population analysis reveals different origins. The 6d participation is the highest for U and decreases afterward, whereas the 5f participation increases continuously from Pa to Pu.

Theoretical Study of Actinide Complexes with Macropa

The complex formation of actinium (Ac³⁺) and californium (Cf³⁺) ions with macropa (a promising ligand for medical applications, e.g., in targeted α therapy) has been studied by means of density functional theory (DFT) calculations. This work is focused on the structural and bonding properties, the latter on the basis of charge transfer data and topological properties of the electron density distribution. The effect of water solvent on the energetics has been investigated using the SMD model. A comparative analysis with the related properties of two representative lanthanide (La, Lu) complexes has been performed.

Tris-{hydridotris(1-pyrazolyl)borato}actinide Complexes: Synthesis, Spectroscopy, Crystal Structure, Bonding Properties and Magnetic Behaviour

The isostructural compounds of the trivalent actinides uranium, neptunium, plutonium, americium, and curium with the hydridotris(1-pyrazolyl)borato (Tp) ligand An[η3 -HB(N2 C3 H3 )3 ]3 (AnTp3 ) have been obtained through several synthetic routes. Structural, spectroscopic (absorption, infrared, laser fluorescence) and magnetic characterisation of the compounds were performed in combination with crystal field, density functional theory (DFT) and relativistic multiconfigurational calculations. The covalent bonding interactions were analysed in terms of the natural bond orbital (NBO) and quantum theory of atoms in molecules (QTAIM) models.

Gas-Phase Complexes of Americium and Lanthanides with a Bis-triazinyl Pyridine: Reactivity and Bonding of Archetypes for F-Element Separations

Bis-triazinyl pyridines (BTPs) exhibit solution selectivity for trivalent americium over lanthanides (Ln), the origins of which remain uncertain. Here, electrospray ionization was used to generate gas-phase complexes [ML₃]³⁺, where M = La, Lu, or Am and L is EtBTP 2,6-bis(5,6-diethyl-1,2,4-triazin-3-yl)-pyridine. Collision-induced dissociation (CID) of [ML₃]³⁺ in the presence of H₂O yielded a protonated ligand [L(H)]⁺ and hydroxide [ML₂(OH)]²⁺ or hydrate [ML(L-H)(H₂O)]²⁺, where (L-H)^- is a deprotonated ligand. Although solution affinities indicate stronger binding of BTPs toward Am³⁺ versus Ln³⁺, the observed CID process is contrastingly more facile for M = Am versus Ln. To understand the disparity, density functional theory was employed to compute potential energy surfaces for two possible CID processes, for M = La and Am. In accordance with the CID results, both the rate determining transition state barrier and the net energy are lower for [AmL₃]³⁺ versus [LaL₃]³⁺ and for both product isomers, [ML₂(OH)]²⁺ and [ML(L-H)(H₂O)]²⁺. More facile removal of a ligand from [AmL₃]³⁺ by CID does not necessarily contradict stronger Am³⁺-L binding, as inferred from solution behavior. In particular, the formation of new bonds in the products can distort kinetics and thermodynamics expected for simple bond cleavage reactions. In addition to correctly predicting the seemingly anomalous CID behavior, the computational results indicate greater participation of Am 5f versus La 4f orbitals in metal-ligand bonding.