A Systematic Review of Survival Rates of Osseointegrated Implants in Fully and Partially Edentulous Patients Following Immediate Loading

Immediate versus early loading of immediately placed bone-level tapered dental implants with hydrophilic surface in full arch maxillary rehabilitation: A pilot randomized clinical trial with 2-year follow-up

This study aimed to compare implant stabilities between the immediate and early loaded, immediately placed bone-level tapered dental implants in the maxilla and to evaluate marginal bone loss (MBL), oral health-related quality of life (OHRQoL), and patient satisfaction at a 2-year follow-up. A pilot, prospective, randomized, controlled clinical trial was conducted on 24 maxillary failing dentition patients. The bone-level tapered implants of 12 patients were immediately loaded with temporary restorations, while the other 12 patients did not receive any kind of temporization. Implant-supported screw-retained complete porcelain-fused-to-metal prostheses were delivered to all patients in the seventh postoperative week. The insertion torque values of implants assigned to the immediate and early loading groups were 33.0 ± 4.87 and 29.26 ± 8.31 Ncm, respectively. The dynamics of implant stability changes from implant placement up to a 2-year follow-up were similar for both groups (Penguin®, p = 0.268; Ostell®, p = 0.552), while the MBL was at submillimeter level. The cumulative implant survival rate was 91.80% for immediately loaded implants and 97.22% for early loaded implants, without significant difference (p = 0.162). The total score on the Oral Health Impact Profile questionnaire significantly decreased over time in both groups, indicating improvement in OHRQoL (p < 0.001), and the high level of patient satisfaction remained after 2 years of function regardless of a loading protocol. Both loading protocols, immediate and early, of six immediately placed bone-level tapered dental implants are an adequate treatment choice for fixed rehabilitation of the maxillary failing dentition.

Factors affecting radiographic marginal bone resorption at dental implants in function for at least 5 years: A multicenter retrospective study

OBJECTIVE

To evaluate the influence of patient and implant-related factors on the changes of marginal bone levels (MBL) at implants with a follow-up ≥5 years.

MATERIALS AND METHODS

At baseline (within 6 months from prosthetic insertion) and long-term (≥5 years after implant placement) visits, interproximal (mesial and distal) MBL were radiographically evaluated. To analyze factors predicting MBL change, the site (either mesial or distal) showing the highest MBL change (hChMBL site) was identified for each implant. Multilevel regression models were built to explain MBL change as well as the probability for a bone loss ≥2 mm at long-term.

RESULTS

942 implants in 312 patients with a mean follow-up of 8.02 ± 2.5 years were analyzed. MBL change was significantly predicted by baseline MBL, oral bisphosphonate (BP) intake, history of periodontitis, diabetes, and super-hydrophilic implant surface. Higher risk for a bone loss ≥2 mm was observed in patients with history of periodontitis (OR = 9.52, 95% CI 0.72-3.79) and taking BP (OR = 6.84, 95% CI 0.21-3.63). Mandibular implants had higher odds for bone loss ≥2 mm compared to maxillary implants (OR = 3, 95% CI 0.39-1.87).

CONCLUSIONS

The findings of the present study contribute to the identification of specific clinical scenarios at higher risk for implant-supporting bone loss that need to be strictly monitored during maintenance.

Optimal Treatment Order With Fibula-Free Flap Reconstruction, Oncologic Treatment, and Dental Implants: A Systematic Review and Meta-Analysis

Head and neck cancer (HNC) patients benefit from craniofacial reconstruction, but no clear guidance exists for rehabilitation timing. This meta-analysis aims to clarify the impact of oncologic treatment order on implant survival. An algorithm to guide placement sequence is also proposed in this paper. PubMed, Embase, and Web of Science were searched for studies on HNC patients with ablative and fibula-free flap (FFF) reconstruction surgeries and radiotherapy (RTX). Primary outcomes included treatment sequence, implant survival rates, and RTX dose. Of 661 studies, 20 studies (617 implants, 199 patients) were included. Pooled survival rates for implants receiving >60 Gy RTX were significantly lower than implants receiving < 60 Gy (82.8% versus 90.1%, P =0.035). Placement >1 year after RTX completion improved implant survival rates (96.8% versus 82.5%, P =0.001). Implants receiving pre-placement RTX had increased survival with RTX postablation versus before (91.2% versus 74.8%, P <0.001). One hundred seventy-seven implants were placed only in FFF with higher survival than implants placed in FFF or native bone (90.4% versus 83.5%, P =0.035). Radiotherapy is detrimental to implant survival rates when administered too soon, in high doses, and before tumor resection. A novel evidence-based clinical decision-making algorithm was presented for utilization when determining the optimal treatment order for HNC patients. The overall survival of dental prostheses is acceptable, reaffirming their role as a key component in rehabilitating HNC patients. Considerations must be made regarding RTX dosage, timing, and implant location to optimize survival rates and patient outcomes for improved functionality, aesthetics, and comfort.

A Fully Guided Sequential Template Immediate Loading Protocol for Dual-Arch Implant Surgery

A method is described for designing, fabricating and implementing sequential template immediate loading protocols for dual arch implant therapy. A 41-year-old medically-free patient with terminal dentition was treated following stackable guide loading protocols for maxillary and mandibular arches. Implants were placed following extractions and immediately loaded with full arch fixed prostheses. Healing was uneventful and all implants integrated successfully. Special consideration was given to the design and clinical challenges when implementing stackable guide protocols for dual arch implant therapy.

Animal Models for Investigating Osseointegration: An Overview of Implant Research over the Last Three Decades

Dental implants and bone augmentation are among dentistry's most prevalent surgical treatments; hence, many dental implant surfaces and bone grafts have been researched to improve bone response. Such new materials were radiologically, histologically, and histomorphometrically evaluated on animals before being used on humans. As a result, several studies used animals to evaluate novel implant technologies, biocompatibility, surgical techniques, and osseointegration strategies, as preclinical research on animal models is essential to evaluate bioactive principles (on cells, compounds, and implants) that can act through multiple mechanisms and to predict animal behavior, which is difficult to predict from in vitro studies alone. In this study, we critically reviewed all research on different animal models investigating the osseointegration degree of new implant surfaces, reporting different species used in the osseointegration research over the last 30 years. Moreover, this is the first study to summarize reviews on the main animal models used in the translational research of osseointegration, including the advantages and limitations of each model and determining the ideal location for investigating osseointegration in small and large animal models. Overall, each model has advantages and disadvantages; hence, animal selection should be based on the cost of acquisition, animal care, acceptability to society, availability, tolerance to captivity, and housing convenience. Among small animal models, rabbits are an ideal model for biological observations around implants, and it is worth noting that osseointegration was discovered in the rabbit model and successfully applied to humans.

Nanotopography and oral bacterial adhesion on titanium surfaces: in vitro and in vivo studies

The present study aimed to evaluate the influence of titanium surface nanotopography on the initial bacterial adhesion process by in vivo and in vitro study models. Titanium disks were produced and characterized according to their surface topography: machined (Ti-M), microtopography (Ti-Micro), and nanotopography (Ti-Nano). For the in vivo study, 18 subjects wore oral acrylic splints containing 2 disks from each group for 24 h (n = 36). After this period, the disks were removed from the splints and evaluated by microbial culture method, scanning electron microscopy (SEM), and qPCR for quantification of Streptococcus oralis, Actinomyces naeslundii, Fusobacterium nucleatum, as well as total bacteria. For the in vitro study, adhesion tests were performed with the species S. oralis and A. naeslundii for 24 h. Data were compared by ANOVA, with Tukey's post-test. Regarding the in vivo study, both the total aerobic and total anaerobic bacteria counts were similar among groups (p > 0.05). In qPCR, there was no difference among groups of bacteria adhered to the disks (p > 0.05), except for A. naeslundii, which was found in lower proportions in the Ti-Nano group (p < 0.05). In the SEM analysis, the groups had a similar bacterial distribution, with a predominance of cocci and few bacilli. In the in vitro study, there was no difference in the adhesion profile for S. oralis and A. naeslundii after 24 h of biofilm formation (p > 0.05). Thus, we conclude that micro- and nanotopography do not affect bacterial adhesion, considering an initial period of biofilm formation.

Effectiveness, Esthetics, and Success Rate of Dental Implants in Bone-Grafted Regions of Cleft Lip and Palate Patients: A Systematic Review and Meta-Analysis

Congenital clefts impair function and appearance, thus impacting a patient's social and mental health. A multidisciplinary team that can offer comprehensive treatment from infancy through maturity and beyond can successfully address these abnormalities. Dental rehabilitation is very important for these patients; these abnormalities should be identified and must be treated accordingly. Hence it is of utmost importance to know the success rate and changes in quality of life from patient satisfaction in order to plan future treatment goals when coming across such cases. The aim of this article is to determine success rate, esthetics, and patient satisfaction in implant-based oral rehabilitation in bone-grafted regions of cleft patients. Registration was carried out in PROSPERO (International Prospective Register of Systematic Review) with registration number CRD42022329861 on May 7, 2022. Medical Subject Headings (MeSH) terms such as cleft lip, cleft palate, survival rate, and dental implants were used to handpick articles via an electronic database. Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines were followed to compile all the data gathered from an electronic database. According to the collected data, 93.5% of the survival rate with dental implants was noted irrespective of the type of bone grafts used. Also, improvement in quality of life was achieved in these patients. Effectiveness, esthetics, and success rate are very well achievable with implants in cleft patients. Although the aesthetics are not equivalent to that of dental implants in normal patients, patient satisfaction is still satisfactory in patients with dental implants in bone-grafted regions of cleft lip and palate.

Immediate loading of dental implants in edentulous mandibles using Locator attachments or Dolder bars: A 9-year prospective randomized clinical study

AIM

To evaluate the long-term survival, incidence of prosthetic/technical and biological complications and the oral-health-related quality of life in patients with an edentulous mandible who were fitted with overdentures on two immediately loaded implants in the symphyseal area.

MATERIALS AND METHODS

Forty-six patients with edentulous mandibles received two immediately loaded implant-retained dentures with either two Locator attachments or egg-shaped bar attachments. Implant outcomes were recorded after a period of observation of 9 years and included prosthetic complications, modified gingiva index (mGI), modified plaque index (mPI), oral health impact profile (OHIP-G) and radiographic estimation of bone loss.

RESULTS

In 2020/2021, 27 patients with 54 implants were still available for follow-up. In total, nine implants in six patients were lost. Survival was 89.1% in the bar group and 91.3% in the Locator group. Implant success was 84.6% in the Locator group and 76.9% in the bar group. The mPI values were significantly higher in the bar group than in the Locator group, whereas no difference was seen in the mGI values. During the observation period, 152 prosthetic complications occurred, but the OHIP-G score did not differ significantly.

CONCLUSIONS

There was no difference in implant survival between Locator or joint bar attachments over a 9-year observation period. Joint bar attachments were associated with slightly more complications, while patients in the Locator group were able to maintain better oral hygiene. The study was registered in the German Register of Clinical (Trials DRKS00004245).

Assessment of Various Risk Factors for Biological and Mechanical/Technical Complications in Fixed Implant Prosthetic Therapy: A Retrospective Study

The goals of this research were to determine the influence of several factors on implants' biological and technical complications in posterior fixed implant prosthetic therapy.

MATERIALS AND METHODS

The study group consisted of 67 edentulous patients (mean age: 63.88 ± 11.709 yrs; 20 males, 47 females) with implant prosthetic therapy for posterior edentulism. A total of 76 implant-supported fixed partial dentures (IP-FPDs) and 178 implants were assessed using clinical and paraclinical assessments. Risk factors for biological complications (peri-implantitis) and technical complications were determined by using the Pearson Chi-squared test and multivariate analysis.

RESULTS

The implant success (the absence of biological and mechanical/technical complications) was 66.30%. The prevalence of biological complications was 13.5%. The prevalence of technical complications was 28.70%. Variables that were associated with a higher risk of peri-implantitis were poor oral hygiene and bruxism. In univariate analysis, poor oral hygiene increased the risk of peri-implantitis 5.778 times and bruxism 5.875 times. Variables that were associated with a higher risk of mechanical/technical complications were age group > 60 yrs, smoking, history of periodontal disease, and bruxism. In univariate analysis, the risk of technical complications increased 4.14 times for patients in the age group > 60 years (vs. age group 40-60 years) and 20.5 times for patients with bruxism. Bruxism and smoking were significant predictors of mechanical/technical complications in the multivariate model.

CONCLUSIONS

In univariate models, patients with poor oral hygiene and bruxism have an increased risk of peri-implantitis. In multivariate models, we did not identify significant predictors of peri-implantitis. Age group > 60 yrs, smoking, history of periodontal disease, bone grafting, and bruxism are risk factors for the increase in the mechanical/technical complication rate. In the multivariate model, smoking and bruxism are significant predictors of the mechanical/technical complications.

Evaluation of Prosthetic Marginal Fit and Implant Survival Rates for Conventional and Digital Workflows in Full-Arch Immediate Loading Rehabilitations: A Retrospective Clinical Study

Digital impression provides several advantages in implant prosthodontics; however, its use in full-arch rehabilitations, especially immediately after surgery, has yet to be validated. The aim of this study was to retrospectively analyse the fit of immediate full-arch prostheses, fabricated using conventional or digital impressions. Patients requiring a full-arch immediate loading rehabilitation were divided into three groups: T1 (digital impression taken immediately after surgery), T2 (Preoperative digital impression, guided surgery-prefabricated temporary bridge) and C (conventional impression taken immediately after surgery). Immediate temporary prostheses were delivered within 24 h after surgery. X-rays were obtained at the time of prosthesis delivery and at the 2-year follow-up. Primary outcomes were cumulative survival rate (CSR) and prosthesis fit. Secondary outcomes were marginal bone level (MBL) and patient satisfaction. One hundred and fifty patients were treated from 2018 to 2020, with 50 in each group. Seven implants failed during the observation period. The CSR was 99% for T1, 98% for T2 and 99.5% for C. A statistically significant difference in prosthesis fit was found among T1 and T2 vs. C. A statistically significant difference was found in the MBL between T1 and C. The outcomes of the present study suggest that digital impression is a viable alternative to conventional protocols for the realisation of full-arch immediate loading prostheses.

Full arch immediate occlusal loading using site specific implants: A clinical series of 10 patients (13 arches)

PURPOSE

Osseointegration of dental endosseous implants has proven to be effective, predictable, and clinically successful. Unloaded healing protocols were originally used in treating edentulous patients. Full arch immediate occlusal loading protocols have been shown to be as effective as unloaded healing protocols. This paper reports on the results, benefits, and limitations of one specific immediate loading protocol using site specific implants for fresh extraction and healed extraction sites.

MATERIALS AND METHODS

Ten consecutive patients [{13 arches} (age range: 64-81 years; average: 70.1) (4 males/6 females) were treated by the first 2 authors in private practice settings. Hopeless teeth were scheduled for extraction with immediate implant placement and immediate loading with insertion of full arch, screw-retained, acrylic resin interim prostheses within 24 hours. Implants were also placed into healed edentulous ridges. Insertion torque values for each implant were recorded. Interim prostheses were removed after at least 3 months of healing. Implants were reverse torque tested (35 Ncm) and evaluated for macroscopic mobility. Definitive full arch prostheses were made. Patients were followed for 21 to 48 months postimplant surgery. Panoramic radiographs were taken immediately postimplant placement and 1 year postoperative.

RESULTS

Thirteen arches were treated; 11 ultrawide diameter implants were placed into molar sockets, 26 inverted body-shift implants were placed into anterior sockets; 25 standard diameter, tapered implants were placed into edentulous sites; 2 zygomatic implants were placed in one patient. The total number of implants placed was 64 (4 preexisting implants were also used and not included in this study). The minimum implant insertion torque value was 20 Ncm. After 12 to 18 months of function (average 14 months), the implant and prosthetic survival rates were 100%. Eight patients were restored with definitive zirconia or acrylic resin hybrid fixed prostheses. Two patients were restored with bar titanium frameworks and removable overdenture prostheses. No prosthetic complications were reported for the definitive prostheses.

CONCLUSIONS

The results of this clinical series with site specific implants and immediate full arch occlusal loading in treating edentulous patients resulted in 100% clinical implant and prosthetic survival rates. According to this study, this protocol can be used with high levels of anticipated success.

Clinical outcomes of full-arch immediate fixed prostheses supported by two axial and two tilted implants: A retrospective cohort study with 12-15 years of follow-up

PURPOSE

To retrospectively assess clinical and radiographic outcomes of immediately loaded full-arch fixed prostheses supported by axial and tilted implants up to 15 years of function.

MATERIALS AND METHODS

Patients with one completely edentulous arch received an immediate full-arch fixed prosthesis supported by two anterior axial and two posterior tilted implants. Definitive prosthesis consisting of a CAD-CAM titanium framework and acrylic teeth was delivered 6 months later. Patients were regularly followed to assess clinical parameters and marginal bone level (MBL) change. Multilevel regression analysis was performed to investigate factors affecting implant failure and MBL.

RESULTS

Six hundred ninety-two implants were placed in 72 maxillae and 101 mandibles. Seven maxillary implants (5 axial and 2 tilted) in 6 patients and 12 mandibular implants (6 axial and 6 tilted) in 5 patients failed. 15-year cumulative implant survival was 97.51% and 96.91% in maxilla and mandible, respectively (p = .64). After 10 years, the difference in MBL between axial and tilted implants was not significant in the maxilla (p = .47, 65 patients), while it was in the mandible (p < .001, 80 patients). Significant higher bone loss was reported in the mandible at both 5- and 10-year follow-up (p < .001 and p = .004, respectively). Mixed-effect multilevel linear regression evidenced a correlation between arch and bone loss at 5- and 10-year follow-up, while no correlation was found with age, gender, smoking, diabetes, and history of periodontal disease.

CONCLUSION

This long-term study suggests that the present technique can be considered a viable treatment modality for the immediate rehabilitation of both maxilla and mandible.

Influence of low insertion torque values on survival rate of immediately loaded dental implants: A systematic review and meta-analysis

AIM

The aim was to systematically evaluate the effect of low insertion torque values on the survival rate of immediately loaded dental implants.

MATERIALS AND METHODS

The protocol was registered with PROSPERO (ID CRD42020189499). An electronic search was performed in PubMed, Embase, Web of Science, and Cochrane Central Register of Controlled Trials until June 2022 in English and Spanish. Studies analysing the failure or survival rate of immediately loaded dental implants according to different insertion torque values were included.

RESULTS

Five-hundred seventy-three articles were assessed for eligibility, of which seven articles, four randomized clinical trials (RCTs), one controlled clinical trial, and two prospective case series studies were included in the qualitative analysis. The RCTs were classified as having low risk of bias and the non-RCTs as having moderate and serious risk of bias. The mean survival rate for implants with low insertion toque (≤35 Ncm) was 96% (p > .001, 95% confidence interval [CI]: 0.91-0.98) and that for implants with medium or high insertion torque (>35 Ncm) was 92% (p > .001, 95% CI: 0.86-0.96) (incidence rate ratio [IRR] = 1.05, 95% CI: 0.79-1.39, p = .175, I²  = 0.0%). Splinted implants with insertion torque >20 Ncm and single implants with insertion torque >35 Ncm had a higher survival rate than implants with lower insertion torque values (IRR = 1.05, 95% CI: 0.78-1.43, p = .956, I²  = 0.0%, and RR = 0.92, 95% CI: 0.48-1.75, p = .799, I²  = 0.0%, respectively). Different insertion torque values achieved equivalent outcomes. The mean follow-up was 24 months.

CONCLUSIONS

Low insertion torque values have no significant effect on survival rates of immediate loading implants at a mean follow-up of 24 months.

Immediate vs. Delayed Placement of Immediately Provisionalized Self-Tapping Implants: A Non-Randomized Controlled Clinical Trial with 1 Year of Follow-Up

This study aimed to examine the clinical and esthetic outcomes of immediately provisionalized self-tapping implants placed in extraction sockets or healed edentulous ridges one year after treatment. Sixty patients in need of a single implant-supported restoration were treated with self-tapping implants (Straumann BLX) and immediate provisionalization. The implant stability quotient (ISQ) and insertion torque were recorded intraoperatively. After one year in function, the implant and prosthesis survival rate, pink esthetic score (PES), white esthetic score (WES), and marginal bone levels (MBL) were assessed. Sixty patients received 60 self-tapping implants. A total of 37 implants were placed in extraction sockets and 23 in edentulous ridges, and then all implants were immediately provisionalized. All implants achieved a high implant stability with a mean insertion torque and ISQ value of 58.1 ± 14.1 Ncm and 73.6 ± 8.1 Ncm, respectively. No significant differences were found between healed vs. post-extractive sockets (p = 0.716 and p = 0.875), or between flap vs. flapless approaches (p = 0.862 and p = 0.228) with regards to the insertion torque and ISQ value. Nonetheless, higher insertion torque values and ISQs were recorded for mandibular implants (maxilla vs. mandible, insertion torque: 55.30 + 11.25 Ncm vs. 62.41 + 17.01 Ncm, p = 0.057; ISQ: 72.05 + 8.27 vs. 76.08 + 7.37, p = 0.058). One implant did not osseointegrate, resulting in an implant survival rate of 98.3%. All implants achieved PES and WES scores higher than 12 at the 1-year follow-up. The clinical use of newly designed self-tapping implants with immediate temporization was safe and predictable. The implants achieved a good primary stability, high implant survival rate, and favorable radiographic and esthetic outcomes, regardless of the immediate or delayed placement protocols.

Mandibular full-arch fixed prostheses supported by three-dental-implants: A protocol of an overview of reviews

INTRODUCTION

To minimize trauma and cost of treatment, oral health practitioners have successfully rehabilitated full arches by supporting the prostheses on four implants. However, there is no consensus whether less than four implants supporting full mandibular arches would provide similar clinical outcomes to other well-established all-on-four alternative.

OBJECTIVE

To identify, summarize, appraise, and compare the clinical outcomes evidence of three-implant fixed full-arch prostheses in completely edentulous mandibular patients.

MATERIALS AND METHODS

This overview of systematic reviews (OoSRs) will include secondary synthesis studies (i.e., systematic reviews with or without a meta-analysis). A three-step search strategy will be conducted in MEDLINE (Ovid), EMBASE (Ovid), Cochrane Database of Systematic Reviews, Scopus, Web of Science (WoS Core Collection), and Google Scholar. Grey literature and a manual search in 12 specialized journals will also be conducted. Three independent reviewers will screen all retrieved articles for eligibility, extract data and assess the methodological quality of the included studies. The results will be presented as tables or narrative synthesis. The studies will be evaluated for risk of bias by ROBIS and methodology quality by the AMSTAR-2 tool. If new primary studies are identified, a meta-analysis will be conducted. Certainty of the evidence will be assessed to answer the following focused research question: In edentulous mandibular patients, what are the implant and prostheses clinical outcomes of three-implant fixed full-arch prostheses compared to other all-on-x solutions?

DISCUSSION

There are some systematic reviews about the use of fixed complete dental prostheses supported by three implants; however, their clinical outcomes related to the other all-on-four plus solutions are conflicting. So, an overview on this topic is required to provide recommendations.

REVIEW REGISTRATION NUMBER

International prospective register of systematic reviews (PROSPERO) ID#: CRD42021262175. National Institute for Health Research (NIHR) and Centre for Reviews and Dissemination, University of York, York, United Kingdom.

The 10 Year Outcomes of Implants Inserted with Dehiscence or Fenestrations in the Rehabilitation of Completely Edentulous Jaws with the All-on-4 Concept

Background: There is a need for a long-term evidence of implants placed in challenging conditions. The aim of this study was to investigate the outcome of full-arch rehabilitations with the All-on-4 concept for implants inserted with dehiscence or fenestrations. Methods: This retrospective cohort study included 123 patients (dehiscence, n = 87 patients; fenestrations, n = 28 patients; both conditions, n = 8 patients), with a total of 192 implants in immediate function presenting dehiscence (n = 150), fenestrations (n = 40), or both conditions (n = 2). Primary outcome measures were cumulative implant survival (CSurR) and success (CSucR) rates. Secondary outcome measures were prosthetic survival, marginal bone loss, and incidence of biological complications. Results: CSurRs were 94.1% (overall), 95.6% (dehiscence), and 88.1% (fenestrations) at 10 years using the patient as the unit of analysis. Smoking affected implant failure significantly (p = 0.019). Implant-level CSurRs and CSucRs at 10 years were 96.2% and 93.5% (overall), 97.2% and 94.6% (dehiscence), and 90.0% and 87.6% (fenestrations), respectively. Average bone resorption at 5 and 10 years was 1.22 mm and 1.53 mm, respectively. Biological complications occurred in 18 patients (n = 18 implants). Conclusions: Implants inserted with dehiscence or fenestrations demonstrate good long-term outcomes with overall high success and survival rates and low average marginal bone resorption, despite an inferior outcome in implants with fenestrations and smoking’s negative effect.

Diagnostic accuracy of imaging examinations for peri-implant bone defects around titanium and zirconium dioxide implants: A systematic review and meta-analysis

Purpose

This systematic review and meta-analysis assessed the diagnostic accuracy of imaging examinations for the detection of peri-implant bone defects and compared the diagnostic accuracy between titanium (Ti) and zirconium dioxide (ZrO₂) implants.

Materials and Methods

Six online databases were searched, and studies were selected based on eligibility criteria. The studies included in the systematic review underwent bias and applicability assessment using the Quality Assessment of Diagnostic Accuracy Studies 2 (QUADAS-2) tool and a random-effect meta-analysis. Summary receiver operating characteristic (sROC) curves were constructed to compare the effect of methodological differences in relation to the variables of each group.

Results

The search strategy yielded 719 articles. Titles and abstracts were read and 61 studies were selected for full-text reading. Among them, 24 studies were included in this systematic review. Most included studies had a low risk of bias (QUADAS-2). Cone-beam computed tomography (CBCT) presented sufficient data for quantitative analysis in ZrO₂ and Ti implants. The meta-analysis revealed high levels of inconsistency in the latter group. Regarding sROC curves, the area under the curve (AUC) was larger for the overall Ti group (AUC=0.79) than for the overall ZrO₂ group (AUC=0.69), but without a statistically significant difference between them. In Ti implants, the AUCs for dehiscence defects (0.73) and fenestration defects (0.87) showed a statistically significant difference.

Conclusion

The diagnostic accuracy of CBCT imaging in the assessment of peri-implant bone defects was similar between Ti and ZrO₂ implants, and fenestration was more accurately diagnosed than dehiscence in Ti implants.

Silk Fibroin/Collagen Blended Membrane Fabricated via a Green Papermaking Method for Potential Guided Bone Regeneration Application: In Vitro and In Vivo Evaluation

Guided bone regeneration (GBR) technology is a commonly used surgical procedure for the repair of damaged periodontal tissues. Poor mechanical property and rapid degradation rate are the major reasons for GBR membrane failure in clinical applications. Herein, we applied a green papermaking method to fabricate silk fibroin (SF) membranes blended with collagen and tested their performance. The results showed that the blended SF75 (SF and collagen in a weight ratio of 75:25) membranes are biocompatible with good mechanical properties in the wet condition and appropriate biodegradation rate. MC3T3-E1 osteoblast cell adhesion and proliferation on the membranes were improved by the hybrid biological functions of SF and collagen. Subcutaneous implantation in rats for 9 weeks demonstrated that the membranes induced a less severe inflammatory response. The biodegradation time of the SF75 membranes was appropriate for tissue regeneration. This research, for the first time, reports a blended membrane prepared from silk fibroin and collagen with an ecofriendly method, which shows promise for application in guided bone regeneration.

Clinical Evaluation of Dental Implants with a Double Acid-Etched Surface Treatment: A Cohort Observational Study with Up to 10-Year Follow-Up

BACKGROUND AND OBJECTIVES

The main purpose of this study was to evaluate the survival and success rates of dental implants with a double acid-etched surface treatment with evaluation times up to 10 years post-loading. Materials and Methods: This study was conducted at a hospital oral surgery and implantology unit. It included 111 dental implants with a double acid-etched surface. Three groups were created: Group 1 (1-3 years loading), Group 2 (3-5 years loading), and Group 3 (over 5 years loading). Probing depth, resonance frequency analysis (ISQ value), and marginal bone loss were evaluated. Results: The data obtained underwent statistical analysis. Overall, 78 patients were included in the study, who received, in total, 111 dental implants, all replacing single teeth. Mean probing depth was 3.03 mm and mean ISQ was 65.54. Regarding marginal bone loss, in Group 1, 67.6% of implants did not undergo any thread loss, in Group 2, 48.3%, and in Group 3, 59.6%; 59.10% of all implants did not present thread loss with a mean bone loss of 0.552 mm. The implant survival rate was 99.1%, and the success rate was 96.37%. Conclusions: Implants with a double acid-etched surface showed excellent success rates in terms of marginal bone loss, ISQ, and probing depth after up to 10 years of loading, making them a clinically predictable treatment option. Future studies are needed to compare this implant surface with other types in different restorative situations.

Impact of Mechanical Complications on Success of Dental Implant Treatments: A Case-Control Study

Objective  This study aimed to investigate the impact of mechanical complications on outcome measures for implant dentistry.

Materials and Methods  This case–control study included 282 patients with mechanical complications occurring in fixed prosthetic rehabilitation supported by immediate function implants with external connection (cases) and 282 individuals without mechanical complications (control). Pairing was performed for sex, age (range = 3 years), and follow-up months (range = 11 months). The primary outcome measure was implant survival, while the secondary outcome measures were marginal bone loss and biological complication parameters (peri-implant pathology, soft tissue inflammation, fistula formation, and abscess formation).

Statistical Analysis  Cumulative implant survival was estimated by using life tables. Descriptive statistics with 95% confidence intervals (CI) and inferential statistics (Chi-square test) were performed to evaluate differences between cases and controls. The significance level was set at 5%.

Results  The average follow-up duration was 8.5 years. Mechanical complications included prosthetic fracture ( n = 159), abutment loosening ( n = 89), prosthetic screw loosening ( n = 20), milled abutment ( n = 12), milled prosthetic screw ( n = 1), and decemented crown ( n = 1). Implant failure occurred in one patient from the control group, with survival rates of 100 and 99.6% for cases and controls, respectively ( p = 0.317). The average marginal bone loss was 1.72 (95% confidence interval [CI]: 1.60–1.84) for cases and 1.55 (95% CI: 1.45–1.65) for controls ( p = 0.068). Biological complications were observed in 90 patients, with significant differences between cases ( n = 54) and controls ( n = 36; p = 0.038).

Conclusion  Mechanical complications did not significantly influence survival or marginal bone loss; nevertheless, there is a need for studies with longer follow-up duration. Mechanical complications also significantly influence the incidence of biological complications.

A Retrospective Study on the Transferring Accuracy of a Fully Guided Digital Template in the Anterior Zone

The accuracy of implant placement with a fully guided digital template can be influenced by many factors, such as arch difference, alveolar bone density, timing of implant placement and open flap. The purpose of this article was to evaluate the factors presumptively affecting the accuracy of implant placement assisted by the fully guided template in the anterior zone. In 40 patients with missing anterior teeth, a total of 52 implants were placed with tooth-borne, fully guided templates after CBCT evaluation, in West China Hospital of Stomatology, Sichuan University. After overlapping the pre-and post-operative DICOM data, measurements were taken in the dental implant planning software (Nobel Clinician^®) to calculate linear and angular deviations between virtual placement plan and actual implant placement. Grouping was categorized according to three factors that possibly have an influence on accuracy: arch type (maxilla/mandible), timing of implant placement (immediate/delayed), surgical technique (open flap/flapless). The data was analyzed with independent sample t-test (p < 0.05). The results showed that the apical, coronal, depth and angular mean deviations of implant positions in anterior zone were 1.13 ± 0.39 mm, 0.86 ± 0.33 mm, 0.41 ± 0.66 mm, 3.32 ± 1.65° with the fully guided templates. The accuracy at apex level, coronal level and the angulation were similar between the maxilla and mandible, and the magnitude of all four deviations between immediate and delayed implantation, open flap and flapless technique were small. No statistically significant difference was observed (p > 0.05). Whereas there was significant difference in depth deviation between maxilla and mandible (p < 0.05). Conclusively, the implant site, alveolar bone density, timing of implant placement and surgical techniques merely compromise the implant placement accuracy under the assistance of a fully guided template.

Clinical, radiographic and restorative parameters for short tuberosity implants placed in smokers: a retrospective study with 5 year follow-up

This study aimed to estimate and compare the clinical, radiographic, and restorative parameters around short tuberosity implants (STIs) placed in cigarette smokers (CS) and never smokers (NS). In this 60-month follow-up retrospective study, a total of 50 (37 males + 13 females) individuals who had received 82 dental implants were included. These participants were categorized into two groups as follows: (i) Group-1: 25 self-reported systemically healthy CS with 43 STIs; and (ii) Group-2: 25 self-reported systemically healthy NS with 39 STIs. In both groups, peri-implant plaque index (PI), probing depth (PD), bleeding on probing (BOP), and crestal bone loss (CBL) and restorative parameters were measured at 12 and 60 months of follow-up. Group comparisons were performed utilizing the Kruskal-Wallis test. The significance level was set at p < 0.05. In CS and NS, the mean age of participants was 58.5 and 60.7 years, respectively. No statistically significant differences were observed in the overall mean levels of PD and CBL around STIs among CS and NS. However, a statistically significant increase was observed in the mean scores of BOP and PI around STIs in the NS and CS at 12 and 60 months follow-up, respectively. In both groups, the loosening of the implant was the most frequently encountered type of STI failure. The outcomes of the present study suggest that STIs placed in maxillary tuberosity can show reliable clinical, radiographic, and restorative stability among cigarettes smokers and non-smokers. However, the role of smoking status and oral hygiene cannot be disregarded in this scenario.

Socket shield technique: A systematic review of human studies

BACKGROUND AND PURPOSE

Alveolar bone resorption after dental extraction frequently leads to situations in which long-term function and esthetic success of rehabilitations with dental implants is a challenge. Socket shield has been described as an alternative technique to maintain the alveolar ridge when placing immediate implants. The aim of this review is to evaluate the medium- and long-term clinical outcomes of the socket shield technique in human studies.

MATERIAL AND METHODS

This review was conducted according to PRISMA guidelines. An electronic search was conducted in four databases: (1) The National Library of Medicine (MEDLINE/PubMed) via Ovid; (2) Web of Science (WOS); (3) SCOPUS; and (4) Cochrane Central Register of Controlled Trials (CENTRAL). The Cochrane Collaboration tool, the Newcastle-Ottawa Quality Assessment Scale and The Joanna Briggs Institute Critical Appraisal tool were used to assess the quality of evidence in the studies reviewed.

RESULTS

Six articles were included in this review. The studies analysed showed lower rates of horizontal and vertical alveolar bone resorption, better maintenance of the buccal plate, less marginal bone loss and better esthetic results than simple placement of immediate implants. However, a lack of homogeneity was found in evaluation methods of the different outcomes, surgical procedures and prosthetic management.

CONCLUSIONS

Based on the results of this review, it is possible to suggest that socket shield technique could be a good alternative in terms of alveolar bone maintenance, marginal bone stability and aesthetic outcomes in immediate implant treatment. However, it is not possible to recommend this technique as an alternative treatment with the same long-terms predictability as conventional immediate implants.

Immediate Post-Extraction Short Implant Placement with Immediate Loading and without Extraction of an Impacted Maxillary Canine: Two Case Reports

For the treatment of impacted maxillary canines, traction associated with a complete orthodontic treatment is the first choice in young patients. However, in adults, this treatment has a worse prognosis. The surgical extraction of the impacted tooth can result in a series of complications and a compromised alveolar bone integrity, which may lead to the requirement of a bone regeneration/grafting procedure to replace the canine with a dental implant. These case reports aimed to describe an alternative treatment procedure to the surgical extraction of impacted maxillary canines in adults. Following clinical and computerized tomography-scan (CT-Scan) examination, the possibility of maintaining the impacted canine in its position and replacing the temporary canine present in its place with a dental implant was planned. A short dental implant with an immediate provisional crown was placed, without contacting the impacted canine. At 3 months follow-up, a definitive metal-ceramic restoration was placed. Follow-up visits were performed periodically. The implant site showed a physiological soft tissue color and firmness, no marginal bone loss, no infection or inflammation, and an adequate aesthetic result in all follow-up visits. These results suggest that the treatment carried out is a valid option to rehabilitate with an osseointegrated short implant area where a canine is included, as long as there is a sufficient amount of the remaining bone.

Predictable immediate implant placement and restoration in the esthetic zone

This article describes a comprehensive step-by-step protocol for immediate implant placement and restoration in the esthetic zone. Clinical Considerations Immediate implant placement into fresh extraction sockets and immediate restoration have become widely accepted, demonstrating long-term success rates that are comparable with traditional delayed implant protocols. However, they are technique sensitive and require proper treatment planning as well as meticulous execution to be predictable and successful in the long term. This is particularly important in the esthetic zone, where even minor aberrations and mistakes can have devastating consequences, and especially in younger patients, where esthetic and functional outcomes should remain stable for years and possibly decades to come. The eight critical steps for predictable immediate implant placement include: provisional restoration of the failing tooth and presurgical phase, atraumatic tooth extraction, initial implant osteotomy, 3D bone graft packing, guided implant placement with a surgical guide, customized abutment insertion, provisional crown relining, and placement of a connective tissue graft from tuberosity. Immediate implant protocols in the esthetic zone require thorough planning and execution in the proper sequence. Each one of the critical steps discussed in this article has its own importance and challenges, which are critically assessed based on current scientific evidence.

Histological and Radiological Features of a Four-Phase Injectable Synthetic Bone Graft in Guided Bone Regeneration: A Case Report

BACKGROUND AND OBJECTIVE

Injectable synthetic bone grafts (ISBG) are widely used biomaterials for regeneration purposes. The aim of this case report was to examine the efficacy of ISBG in the management of buccal fenestration in the case of a 25-year-old female.

CASE REPORT

After a traumatic tooth extraction, the defect was filled with ISBG and covered with a resorbable membrane. The ISBG showed easy handling and the patient had no complications during healing. Six months after augmentation, a bone biopsy was taken during implant bed preparation. The histological results showed good integration of ISBG into the newly formed bone and no signs of tissue inflammation. Additionally, a CBCT (cone beam computed tomography) analysis was performed to support the histological results.

CONCLUSION

The use of the examined ISBG led to successful treatment of the buccal fenestration defect.

Development of a Surface-Functionalized Titanium Implant for Promoting Osseointegration: Surface Characteristics, Hemocompatibility, and In Vivo Evaluation

This study aimed to evaluate the impact of surface-modified biomedical titanium (Ti) dental implant on osseointegration. The surfaces were modified using an innovative dip-coating technique (IDCT; sandblasted, large-grit, and acid-etched, then followed by coating with the modified pluronic F127 biodegradable polymer). The surface morphology and hemocompatibility evaluations were investigated by field-emission scanning electron microscopy, while the contact analysis was observed by goniometer. The IDCT-modified Ti implant was also implanted in patients with missing teeth by single-stage surgical procedure then observed immediately and again four months after placement by cone-beam computerized tomography (CBCT) imaging. It was found that the IDCT-modified Ti implant was rougher than the dental implant without surface modification. Contact angle analysis showed the IDCT-modified Ti implant was lower than the dental implant without surface modification. The hemocompatibility evaluations showed greater red blood cell aggregation and fibrin filament formation on the IDCT-modified Ti implant. The radiographic and CBCT image displayed new bone formation at four months after the IDCT-modified Ti implant placement. Therefore, this study suggests that the IDCT-modified Ti dental implant has great potential to accelerate osseointegration.

Trefoil System for the Treatment of Mandibular Edentulism: A Case Report with 30 Months Follow-Up

The purpose of this work is to describe a clinical case of full-arch mandible rehabilitation with a fixed prosthesis on three implants. The chosen protocol is the Trefoil system by Nobel (Nobel Biocare, Zurich, Switzerland) that allows to realize a mandibular fixed rehabilitation on three particularly designed fixtures through the use of prefabricated surgical guides and a preassembled bar on which the prosthesis is built. Both surgical and prosthetic procedures were completed without complications, and after 30 months, the rehabilitations are in good health conditions. The patient is able to maintain a good level of hygiene and is satisfied with the work from an aesthetic and functional point of view.

Long-Term Clinical Outcomes of Treatment with Dental Implants with Acid Etched Surface

Implant dentistry constitutes a therapeutic modality in the prosthodontic treatment of partially and totally edentulous patients. This study reports a long-term evaluation of treatment by the early loading of acid-etched surface implants. Forty-eight partially and totally edentulous patients were treated with 169 TSA Defcon® acid-etched surface implants for prosthodontic rehabilitation. Implants were loaded after a healing free-loading period of 6–8 weeks in mandible and maxilla, respectively. Implant and prosthodontic clinical findings were followed during at least 17 years. Clinical results indicate a survival and success rate of implants of 92.9%, demonstrating that acid-etched surface achieves and maintains successful osseointegration. Five implants in three patients were lost during the healing period. Sixty-five prostheses were placed in 45 patients over the remaining 164 implants, 30 single crowns, 21 partially fixed bridges, 9 overdentures, and 5 full-arch fixed rehabilitations. A total of 12 implants were lost during the follow-up period. Mean marginal bone loss was 1.91 ± 1.24 mm, ranging from 1.1 to 3.6 mm. The most frequent complication was prosthetic technical complications (14.2%), followed by peri-implantitis (10.6%). The mean follow-up was of 214.4 months (208–228 months). Prosthodontic rehabilitation with an early-loading protocol over acid-etched surface implants is a successful implant treatment.