A Hierarchical Architecture of Functionalized Polyaniline/Manganese Dioxide Composite with Stable-Enhanced Electrochemical Performance

Fabrication and Characterization of a Poly(3,4-ethylenedioxythiophene)@Tungsten Trioxide-Graphene Oxide Hybrid Electrode Nanocomposite for Supercapacitor Applications

With the rapid development of nanotechnology, the study of nanocomposites as electrode materials has significantly enhanced the scope of research towards energy storage applications. Exploring electrode materials with superior electrochemical properties is still a challenge for high-performance supercapacitors. In the present research article, we prepared a novel nanocomposite of tungsten trioxide nanoparticles grown over supported graphene oxide sheets and embedded with a poly(3,4-ethylenedioxythiophene) matrix to maximize its electrical double layer capacitance. The extensive characterization shows that the poly(3,4-ethylenedioxythiophene) matrix was homogeneously dispersed throughout the surface of the tungsten trioxide-graphene oxide. The poly(3,4-ethylenedioxythiophene)@tungsten trioxide-graphene oxide exhibits a higher specific capacitance of 478.3 F·g-1 at 10 mV·s-1 as compared to tungsten trioxide-graphene oxide (345.3 F·g-1). The retention capacity of 92.1% up to 5000 cycles at 0.1 A·g-1 shows that this ternary nanocomposite electrode also exhibits good cycling stability. The poly(3,4-ethylenedioxythiophene)@tungsten trioxide-graphene oxide energy density and power densities are observed to be 54.2 Wh·kg-1 and 971 W·kg-1. The poly(3,4-ethylenedioxythiophene)@tungsten trioxide-graphene oxide has been shown to be a superior anode material in supercapacitors because of the synergistic interaction of the poly(3,4-ethylenedioxythiophene) matrix and the tungsten trioxide-graphene oxide surface. These advantages reveal that the poly(3,4-ethylenedioxythiophene)@tungsten trioxide-graphene oxide electrode can be a promising electroactive material for supercapacitor applications.

Influence of High Energy Ball Milling and Dispersant on Capacitive Properties of Fe2O3—Carbon Nanotube Composites

This investigation is motivated by increasing interest in ferrimagnetic materials and composites, which exhibit electrical capacitance. It addresses the need for the development of magnetic materials with enhanced capacitive properties and low electrical resistance. γ-Fe2O3-multiwalled carbon nanotube (MWCNT) composites are developed by colloidal processing and studied for energy storage in negative electrodes of supercapacitors. High energy ball milling (HEBM) of ferrimagnetic γ-Fe2O3 nanoparticles results in enhanced capacitive properties. The effect of HEBM on particle morphology is analyzed. Gallocyanine is used as a co-dispersant for γ-Fe2O3 and MWCNTs. The polyaromatic structure and catechol ligand of gallocyanine facilitated its adsorption on γ-Fe2O3 and MWCNTs, respectively, and facilitated their electrostatic dispersion and mixing. The adsorption mechanisms are discussed. The highest capacitance of 1.53 F·cm−2 is achieved in 0.5 M Na2SO4 electrolyte for composites, containing γ-Fe2O3, which is high energy ball milled and co-dispersed with MWCNTs using gallocyanine. HEBM and colloidal processing strategies allow high capacitance at low electrical resistance, which facilitates efficient charge–discharge. Obtained composites are promising for fabrication of multifunctional devices based on mutual interaction of ferrimagnetic and capacitive properties.