Effect of Resin Infiltration on Enamel: A Systematic Review and Meta-Analysis

Does the Transillumination Technique Using a Diagnostic White Tip Influence the Degree of Conversion of the Infiltrant Resin? A Case Report With In Vitro Insights: A New Technique to Improve the Predictability During the Application of Resin Infiltration: Transillumination Using a Diagnostic White Tip

OBJECTIVE

This study aimed to evaluate, through a case report combined with in vitro study, whether a new diagnostic white tip for the transillumination technique during resin infiltration influences the procedure and degree of conversion (DC).

MATERIALS AND METHODS

A clinical case report demonstrated resin infiltration using the transillumination technique with a new white diagnostic tip (Radii Xpert LED diagnostic tip, SDI, Bayswater, VIC, AU) along with a light-curing device to enhance aesthetic results. An in vitro study assessed the DC of two diagnostic white tips (Radii Xpert LED diagnostic tip [SDI, Bayswater, VIC, AU] and Valo Grand White Light Lens [Ultradent Prod., South Jordan, UT, USA]) compared to that achieved using conventional tips of both light-curing devices. Statistical analysis was performed using two-way ANOVA and Tukey's test (α = 0.05).

RESULTS

The clinical case achieved complete masking of the white spot lesion. In vitro, the diagnostic white tips exhibited significantly lower DC values compared to conventional tips (p = 0.001), regardless of the light-curing unit.

CONCLUSIONS

The diagnostic white tip used in the transillumination technique improves resin infiltration visibility without compromising the degree of conversion.

CLINICAL SIGNIFICANCE

The transillumination technique with the diagnostic white tip enables monitoring of resin infiltration while maintaining effective polymerization.

Masking efficacy of bleaching and/ or resin infiltration of fluorotic spots on anterior teeth - a systematic review and meta-analysis

OBJECTIVES

The aim of this systematic review and meta-analysis was to evaluate the masking success of bleaching and/or resin infiltration treatment of fluorotic lesions in anterior teeth of adults and adolescents.

DATA SOURCES

PubMed, Cochrane Library, and Embase were systematically searched from the beginning of documentation to December 31, 2023.

PRIMARY OUTCOME WAS THE NUMBER OF MASKED TEETH

A tooth was considered masked when the color difference (ΔE CIE76) between fluorotic areas and the surrounding sound enamel was ≤3.7 and unmasked if ΔE > 3.7. Secondary outcomes were mean ΔE values between fluorotic and sound enamel reported for a treatment group at baseline and after any intervention as well as patient satisfaction.

STUDY SELECTION

Of 1575 search results 4 publications met the inclusion criteria, comprising 230 treated anterior teeth with fluorosis in 47 patients. Meta-analyses were performed comparing the result after treatment (bleaching, resin infiltration, or bleaching followed by resin infiltration) to baseline.

RESULTS

Bleaching and resin infiltration were suitable intervention strategies to improve the esthetics of fluorosis affected anterior teeth, with a combination of both treatment approaches being particularly effective in reducing the color difference between fluorotic defects and the surrounding sound enamel below the acceptability thresholds of 3.7 (success rate [95 %CI]: 0.75 [0.44, 1.06]). Patient satisfaction increased after treatments, indicating a beneficial impact on their mental health. The overall bias of the included studies was 2.5 (ROBINS-I analysis tool).

CONCLUSION

There is evidence that resin infiltration with preceding bleaching therapy is more effective in masking fluorotic lesions in anterior teeth than bleaching alone. The combination therapy also showed a tendency towards higher success rates compared to infiltration alone. However, this difference was statistically not significant, and more studies are needed to further assess the efficacy of specific treatments and their combinations as well as the certainty in the evidence. The methodologic heterogeneity of study designs regarding estimation of color difference before and after treatment and bleaching protocols calls for unification in future studies.

CLINICAL SIGNIFICANCE

Results of this systematic review and meta-analysis revealed the combination of bleaching followed by resin infiltration as efficacious approach for masking fluorotic lesions in young adults. While resin infiltration alone improves the aesthetic appearance of fluorotic lesions, dentists should consider a combined bleaching-infiltration regimen to achieve more favorable clinical outcome for their patients.

Bleaching as a complement to fluoride-enhanced remineralization or resin infiltration in masking white spot lesions

OBJECTIVE

There are many suitable strategies for addressing caries, which is an ongoing worldwide problem. Although white spot lesions (WSLs) can be either remineralized naturally or treated with non- or micro-invasive strategies, their whitish and opaque appearance may persist. To evaluate the effects of tooth bleaching as a complement to fluoride-enhanced remineralization or resin infiltration in masking WSLs, as well as in enamel surface roughness relative to that of the adjacent enamel.

METHODOLOGY

Flattened rectangular bovine enamel fragments (6×3×~2.9 mm length, width and thickness) were divided into six groups (L/N, F/N, F.BL/BL, I/N, I.BL/BL, N/N; n=15). Treatments applied to the 3×3 mm left half included: L (Lesion) - WSL simulation with 50 mM acetate buffer, 96 hours, 37ºC; F (Fluoride) - WSL treatment with 2% NaF neutral gel, 1x/week, 8 weeks; I (Infiltration) - WSL treatment with H3PO4 37%/10 s; Icon®-Dry/30 s; Icon®-Infiltrant/3 min+1 min; N (Nothing) - sound enamel/control. Treatments applied to both halves after F and I included: BL (Bleaching) - Opalescence Boost 40%, 3×/20 min each; N (Nothing) - control. The differences in color (ΔE00, ΔL, Δa, Δb) and surface roughness (ΔRa) between the left and right halves were measured. Kruskal-Wallis/post-hoc tests were applied to ΔE00, ΔL, Δa and ΔRa, and 1-way ANOVA/Tukey tests to Δb (α=0.05).

RESULTS

The factor under study significantly influenced ΔE00 (p=0.0001), ΔL (p=0.0024), Δb (p=0.0015), and ΔRa (p<0.001), but not Δa (p=0.1592). Both fluoride-enhanced remineralization and resin infiltration were able to mask WSL, regardless of subsequent bleaching. However, when bleaching was performed, ΔE00 median values did not exceed the acceptability threshold for color difference. Only resin infiltration reduced ΔRa between WSL and the adjacent enamel.

CONCLUSIONS

Both remineralization and infiltration, particularly if complemented by bleaching, fostered satisfactory esthetic results. Only infiltration without bleaching led to really good results in surface roughness.

Management of white spot enamel lesions with resin infiltration: potentials and future research directions

DESIGN

The current study1 is a randomized controlled trial with two arm, multicenter and parallel group design.

CASE SELECTION

Study subjects were 38 orthodontic patients younger than 17 years who were being treated with metal braces. Patients with at least one white spot lesion (WSL) graded 1 to 2 according to the International Caries Detection and Assessment System (ICDAS) on the labial surface of permanent maxillary and mandibular canines and incisors were included for the trial. Teeth with carious lesions and restorations, anomalies of the enamel, and primary teeth were excluded.

METHOD

Patients were allocated by computer generated random sequence into resin infiltration and fluoride varnish intervention groups. Study subjects were blinded until the allocation, outcome assessors and statisticians remained blinded through the study, however the operators could not be blinded. Resin infiltration treatment involved removal of orthodontic wires and auxiliaries followed by cleaning the teeth with fluoride free prophylactic paste and completing the resin infiltration according to manufacturer's instructions. In the fluoride varnish group, a thin layer of the material was applied after isolating the teeth, and patients were asked not to eat or drink for 1 hour. This was continued twice a month for 6 months. Digital images of the teeth were obtained before, and 1 day (T1), 1 week (T2), 1 month (T3), 3 months (T4) and 6 months (T5) after treatment, using a DSLR camera and a matching polarization filter. The images were processed for calibration and color stability. Regions of interest representing WSL (white spot lesion) and SAE (sound adjacent enamel) were isolated in the images for comparison at different stages the images were captured.

DATA ANALYSIS

Statistical analysis was performed using SPSS version 28. Independent-samples t-test was utilized for comparison between the two groups, and paired-samples t-test for comparison within the groups. A statistical significance level of α = 0.05 was set.

RESULTS

At T1, significant color difference was observed between white spot lesion and adjacent sound enamel in the resin infiltration group and it remained stable after 6 months. Whereas in the fluoride varnish group, there were no statistical differences from baseline to 6 months. A statistical difference of 3.27 CIELAB units (p < 0.001) was reported between the infiltration group and the fluoride group at T5. No significant changes were noted in SAE with respect to changes in lightness.

CONCLUSIONS

Resin infiltration was found to be better at masking the demineralization produced by WSL and also enhanced the esthetic appearance of demineralized areas around the brackets. Resin infiltration did not produce any clinically visible effects in non-affected enamel. These changes remained stable for a period of 6 months.

Evaluation of resin infiltration for inhibiting initial caries progression: An in vitro study using Micro-Computed Tomographic analysis

Objective

To evaluate the changes in lesion depth and mineral density of resin infiltration-treated white spot lesions against a simulated oral environment using thermal and acidic challenges in vitro.

Materials and methods

Two enamel slabs were prepared from each buccal surface of permanent human premolars, for a total of 56 slabs. Artificial white spot lesions were induced. One specimen was treated with resin infiltration, while the other was used as an untreated control. A micro-CT was used to assess the lesion depth and mineral density of each specimen. Subsequently, all specimens were subjected to 10,000 cycles of thermocycling and pH cycling for 10 days before being re-evaluated using the micro-CT. Lesion depth and mineral density were examined and compared between before and after aging procedures within each group by the paired sample t-test. The independent samples t-test was utilized to compare lesion depth progression and percentage change of mineral density between groups.

Results

After aging, there was both a significant lesion depth progression and a mineral loss in the control and resin infiltration groups. Mean lesion depth progression was 132.88 ± 4.18 µm for the control group and 52.31 ± 4.16 µm for resin infiltration group. Percentage mineral density loss as a percentage for the control and resin infiltration groups were 16.1 ± 0.64 % and 8.83 ± 0.30 %, respectively. The resin infiltration group demonstrated a significantly lower mean lesion depth progression and percentage changes in mineral loss compared to the control group.

Conclusions

The lesion depth and mineral density changes in the resin infiltrated-treated group were lower than untreated white spot lesions after aging procedures using thermal and acidic challenges.

Clinical significance

Resin infiltration is a promising approach to inhibit the progression of white spot lesions related to the initial stage of dental caries.

Aesthetic impact of resin infiltration and its mechanical effect on ceramic bonding for white spot lesions

BACKGROUND

Treating white spot lesions (WSLs) with resin infiltration alone may not be sufficient, raising questions about its compatibility with other treatments amid controversial or incomplete data. Therefore, this study aimed to assess the aesthetic feasibility of resin infiltration combined with bleaching, as well as its potential mechanical effect on ceramic bonding to WSLs.

METHODS

One hundred and fifty flat enamel surfaces of bovine incisors were prepared. Ninety specimens were deminerailized and randomly assigned to three groups(n = 30): post-bleaching resin infiltration (Bl-R), pre-bleaching resin infiltration (R-Bl), and only resin infiltration (R). Color, surface roughness and microhardness were assessed in immediate, thermocycling and pigmentation tests. The remaining sixty samples were randomly assigned to three groups (n = 20): control (Ctrl), bonding (Bo), pre-bonding resin infiltration (R-Bo). Shear bonding strength, failure mode, micro-leakage depth and interface morphology were evaluated after ceramic bonding. The Tukey test and analysis of variance (ANOVA) were used for statistical analysis.

RESULTS

For the effect of resin infiltration and bleaching on WSLs, the R-Bl group showed the worst chromic masking ability, with the highest |ΔL|, |Δa|, |Δb|, and ΔE values after treatment. Compared with those in the Bl-R group, the R-Bl and R groups showed significant time-dependent staining, which is possibly attributed to their surface roughness. For the effect of resin infiltration on the adhesive properties of WSLs, resin infiltration reduced the staining penetration depth of WSLs from 2393.54 ± 1118.86 μm to 188.46 ± 89.96 μm (P < 0.05) while reducing WSLs porosity in SEM observation.

CONCLUSIONS

Post-bleaching resin infiltration proved to be advantageous in the aesthetic treatment of WSLs. Resin infiltration did not compromise bonding strength but it did reduce microleakage and enhance marginal sealing. Overall, resin infiltration can effectively enhance the chromatic results of treated WSLs and prevent long-term bonding failure between ceramics and enamel. Based on these findings, the use of post-bleaching resin infiltration is recommended, and resin infiltration before ceramic bonding is deemed viable in clinical practice.

Effects of repeated etching cycles using 15% hydrochloric acid on enamel loss and relative attenuation coefficient in resin infiltration

BACKGROUND

Resin infiltration is used to mask enamel opacities and the recommended etching cycles are three. However, anecdotal evidence suggests that favorable esthetics outcomes can be obtained by increasing the etching cycles.

AIM

To determine the incremental and total enamel loss when enamel surfaces are exposed to multiple etching cycles and to assess the relative attenuation coefficient after multiple etching cycles and resin infiltration treatment.

METHODS

Ninety extracted sound human premolars teeth were divided into 9 groups (n = 10); with each consecutive group having one additional etching cycle up to 9 cycles. The teeth were scanned with optical coherence tomography and enamel loss and attenuation coefficient were measured with MATLAB software. Enamel loss (one-way ANOVA, p ≤ 0.05) and attenuation coefficient (two-way ANOVA, p ≤ 0.05) were statistically analyzed.

RESULTS

There was a significant total enamel loss of more than 33% found at the 7th etching cycle and more. There was no statistically significant difference in the incremental mean depth of penetration of resin between various etching cycles (F(8, 134) = [2.016], one-way ANOVA, p = 0.185).

CONCLUSION

This study recommends that etching should not be repeated more than seven cycles to prevent excessive enamel loss. Following eight etching cycles, resin infiltration penetration appears approximately equal to that of healthy enamel.

Influence of resin infiltration pretreatment on the microleakage under orthodontic bracket (an in vitro study)

OBJECTIVES

In order to assess the changes in tooth orthodontic adhesive interface microleakage after applying a caries resin penetrated to the sound enamel tooth surface in different storage media.

MATERIALS AND METHODS

A total of 60 human maxillary first premolars (orthodontic extraction) were collected by random separation of the teeth into two equal groups. The control group was classified into three subgroups (n = 10) (control in deionized water, control in milk, and control in energy drink), while the experimental one (treated with ICON) was categorized into three subgroups (n = 10) (ICON in deionized water, ICON in milk, and ICON in energy drink) incubation phase lasted three weeks in total.

RESULTS

A one-way analysis of variance (ANOVA) yielded a significant difference between all experimental subgroups (ICON in deionized water, ICON in milk, and ICON in energy drink) and control subgroups (control in deionized water, control in milk, and control in energy drink). The control group in the energy drink subgroup had the highest mean microleakage value when compared to the other subgroups, whereas the resin-infiltrated group in deionized water had the lowest mean value. According to the results of the T-test, ICON pre-treatment tooth samples had significantly lower mean values of microleakage than non-ICON tooth samples.

CONCLUSIONS

The adhesive system (control group) revealed that a resin infiltrate on a sound enamel surface prior to orthodontic bracket bonding reduced bracket tooth interface microleakage in all examined samples. The ICON-infiltrated surface was discovered to provide a secondary preventive strategy against white spot lesion development by reducing microleakage under brackets.

Polyphenols for Preventing Dental Erosion in Pre-clinical Studies with in situ Designs and Simulated Acid Attack

Dental erosion is a chemical process characterized by acid dissolution of dental hard tissue, and its etiology is multifactorial. Dietary polyphenols can be a strategy for dental erosion management, collaborating to preserve dental tissues through resistance to biodegradation. This study describes a comprehensive review to interpret the effects of polyphenols on dental erosion of pre-clinical models with in situ designs and simulated acid attacks on enamel and dentin samples. We aim to evaluate evidence about Polyphenols' effects in the type of dental substrate, parameters of erosive cycling chosen in the in situ models, and the possible mechanisms involved. An evidence-based literature review was conducted using appropriate search strategies developed for main electronic databases (PubMed, Scopus, Web of Science, LILACS, EMBASE, LIVIVO, CINAHL, and DOSS) and gray literature (Google Scholar). The Joanna Briggs Institute checklist was used to evaluate the quality of the evidence. From a total of 1900 articles, 8 were selected for evidence synthesis, including 224 specimens treated with polyphenols and 224 control samples. Considering the studies included in this review, we could observe that polyphenols tend to promote a reduction in erosive and abrasive wear compared to control groups. However, as the few studies included have a high risk of bias with different methodologies and the estimated effect size is low, this conclusion should not be extrapolated to clinical reality.

Colour Parameters and Changes of Tea-Stained Resin Composite Exposed to Whitening Pen (In Vitro Study)

BACKGROUND

One of the crucial factors influencing the longevity of anterior aesthetic dental restorations is the colour stability of resin composites. Bleaching and whitening have become popular methods for enhancing dental aesthetics. Home whitening techniques, such as special pens, are widely available commercially. This in vitro study aimed to determine the efficiency of a whitening pen in removing tea stains from resin composite by measuring colour differences (ΔE₀₀). Additionally, the study aimed to evaluate the variations in colour parameters measured by extra-oral and intra-oral spectrophotometers.

METHODS

A total of 45 disc-shaped resin composite specimens were randomly divided into three groups; Group 1: stored in artificial saliva (control), Group 2: stored in artificial saliva followed by a whitening pen application, and Group 3: stored in tea followed by a whitening pen application. Colour measurements were taken three times for each specimen using two spectrophotometers (extra-oral and intra-oral devices); T1: before storage (baseline), T2: after storage in artificial saliva or tea for 6 days; and T3: after one week of whitening pen application in groups 2 and 3. The data were statistically analyzed using one-way ANOVA followed by the Tukey post hoc test (p ≤ 0.05). The independent sample t-test was also employed. The equation of CIEDE2000 (ΔE₀₀) was used to calculate the colour difference between the dry, as-prepared specimens (baseline), and those after storage or bleaching. The colour changes exceeding the acceptability threshold (∆E₀₀ = 1.8) were considered unacceptable.

RESULTS

After whitening, the colour of the specimens stored in brewed tea (Group 3) remained unacceptable, as indicated by both the extra-oral and intra-oral spectrophotometers (ΔE₀₀ = 4 and 2.9, respectively). Groups 1 and 2 exhibited lower ΔE₀₀ values than Group 3 (p = 0.01 *). No significant difference was observed between Group 1 (stored in artificial saliva) and Group 2 (stored in artificial saliva and then bleached) (p = 0.3). Significant differences were consistently observed between the data obtained from the extra-oral spectrophotometer and the intra-oral one.

CONCLUSIONS

The whitening pen proved ineffective in removing tea stains from resin composites. Although significant differences were found between the values obtained by the two spectrophotometers (extra-oral and intra-oral), both devices confirmed the unacceptable colour of the tea-stained resin composites after whitening.

Esthetic Effects and Color Stability of Resin Infiltration on Demineralized Enamel Lesions: A Systematic Review

Aims and Objectives

The aim of this study was to systematically review the ability of resin infiltration to conceal demineralized enamel lesions to normal enamel translucency and to maintain color stability.

Materials and Methods

A literature search of PubMed, MEDLINE, Web of Science, and Scopus databases and a manual search of articles from 2009 to 2021 for randomized controlled trials (RCTs) and clinical efficacy trials (nonrandomized) were performed. Methodological quality and risk of bias (RoB) of included papers was assessed using Cochrane Collaboration Risk of Bias Tool 2.0 for RCTs and ROBINS-I (Risk Of Bias In Non-randomized Studies of Interventions) tool for nonrandomized studies.

Results

A total of 352 titles and abstracts were reviewed. Eight RCTs and three clinical efficiency studies were included in this review. The masking effects of the demineralized enamel lesion were reported immediately after resin infiltration, and the color stability of this material was up to 24 months, with no adverse effects noted. For RCTs, four studies were classified as "some concerns" and four were as "low RoB." For nonrandomized studies, all of the studies presented an overall moderate RoB.

Conclusion

Resin infiltration achieves the best esthetic outcomes compared with microabrasion and remineralization therapy. Color stability was achieved with this material for up to 24 months and no adverse effects were noted. Factors contributing to the esthetic outcomes of the resin include the elimination of the hypermineralized surface layer, the homogeneity of the resin itself, and polishing after resin infiltration. Longitudinal follow-up and improved control of confounding variables should characterize future high-quality systematic reviews.

Repeated Etching Cycles of Resin Infiltration up to Nine Cycles on Demineralized Enamel: Surface Roughness and Esthetic Outcomes-In Vitro Study

Resin infiltration (RI) is used to mask enamel opacities. There are three recommended etching cycles. However, anecdotal evidence suggests that favorable esthetics outcomes can be obtained by increasing the etching cycles. This study aimed to evaluate the effects of repeated etching cycles during RI application on esthetic changes and surface roughness of demineralized enamel at multiple treatment stages. Artificial demineralization was prepared on the buccal surface of ninety sound extracted premolars. The teeth were divided into nine groups (n = 10); with each consecutive group having one additional etching cycle up to nine etching cycles. Resin infiltrant was performed twice, first for 3 min (Resin 1) and again for 1 min (Resin 2). Surface roughness and esthetic changes were assessed using a profilometer (Ambios XP-200) and Minolta spectrophotometer, respectively, at baseline (sound enamel), etching, resin 1, resin 2, 7 days, and 28 days post resin applications. Data were analyzed with two-way ANOVA (p < 0.05). There was a significant interaction between the different stages and various groups of etching cycles on surface roughness, F(48, 126) = 3.48, p < 0.001. There was a significant interaction between the different stages and various groups of etching cycles on color changes, F(4, 126) = 1.177, p = 0.045. The surface roughness of demineralized enamel infiltrated with RI was less than that of sound enamel (baseline). There is a significant difference in color changes between resin 1 and resin 2 (p < 0.05). After five etching cycles, RI improved the esthetic of the color of teeth similar to the baseline. Surface roughness and color changes remained constant for 28 days. RI can be considered an effective and predictable treatment option for the restoration of early enamel lesions owing to its better surface characteristics and reliable masking effects. The color stability and surface roughness stay unaltered for up to 28 days.

Comparison of therapies of white spot lesions: a systematic review and network meta-analysis

OBJECTIVE

White spot lesions (WSLs), the earliest evidence of enamel demineralization, are considered amenable to intervention to achieve a remineralized or arrested state of caries. The management of WSLs is quite challenging, and there is no definitive cure as yet. We performed a network meta-analysis to assess the efficacy of seven therapies for WSLs and gave a hierarchy of them.

MATERIALS AND METHODS

We systematically searched the PubMed, EMBASE, Cochrane, and Web of Science databases (last search: July 2022) to identify all relevant studies. We limited our search to studies published in English. Randomized controlled designed in vitro/clinical trials related to the efficacy of the seven therapies for WSLs were included. Data extraction was performed independently by two reviewers. The risk of bias (ROB) 2.0 tool from Cochrane and a previous in vitro methodological tool will be used for the quality assessment. Variations in quantitative light-induced fluorescence (QLF), laser fluorescence (LF), and lesions area were the primary outcome measures. Standard mean difference (SMD) was used as the effect size for the Network meta-analysis (NMA). Consistency and inconsistency tests were conducted. The hierarchy of 7 treatment effects was evaluated using surface probabilities under cumulative ranking (SUCRA). Publication bias was evaluated using a bias plot.

RESULTS

Forty-two articles were included in the systematic review. Thirty-one of them, with a total of 1906 participants, were included in the network meta-analysis. The studies owned a low and moderate risk of bias. This analysis does not suffer from significant inconsistency. The difference between 4 groups 'self-assembled peptide (SAP) P11-4', 'P11-4 + Fluoride Varnish (FV)', 'Resin Infiltration (RI)', 'casein phosphor peptides-amorphous calcium fluoride phosphate (CPP-ACFP)' and the 'Control' group was found to be statistically significant. Compared to the 'FV' and 'casein phosphor peptides-amorphous calcium phosphate (CPP-ACP)' groups, the 'P11-4 + FV" group and 'RI" group made a significant difference. The hierarchy was evident in the SUCRA values of 7 therapies. P11-4 + FV and RI were considered effective therapies compared to the control group or the FV group (gold standard group).

CONCLUSIONS

The available evidence suggests that resin infiltration and P11-4 in combination with fluoride varnish had advantages over gold standard (FV). The effect of tricalcium phosphate-based drugs and fluoride is not very noticeable. Overall, drugs based on P11-4 and resin infiltration will be better therapies. Using more than two drugs in combination also would increase efficacy.

The Penetration Depth of Resin Infiltration Into Enamel: A Systematic Review

Aims and Objectives

Studies on resin infiltration and its penetration capability are becoming the focus of emerging dentistry. The depth of resin penetration could be a key determining factor in creating a diffusion barrier and in the success of infiltration. The aim of this review article was to evaluate the penetration depth of commercially available resin infiltration in early caries lesions and to identify factors that influence the penetration capability of resin infiltration.

Materials and Methods

A literature search was performed in four databases (PubMed, Science Direct, Scopus, and Web of Science) and manual searching from 2009 to December 2022. Eligibility criteria included in vitro studies pertaining to factors affecting the penetration depth of resin infiltration into the enamel. The risk of bias assessment was done by using checklist for reporting in vitro studies (CRIS).

Results

The initial search resulted in a total of 297 studies. Twenty-nine were assessed for eligibility, and 23 were selected in the qualitative synthesis. According to the CRIS guidelines, all of the studies were classified as moderate risk of bias. The penetration of resin infiltration is influenced by the enamel surface treatment with hydrochloric acid, formulations containing triethylene glycol dimethacrylate (TEGDMA), the addition of ethanol, penetration time, duration of penetration time, saliva contamination, caries activity, and type of tooth. The hypermineralized surface layer needs to be removed for better resin perfusion.

Conclusion

The key to optimal resin infiltration depends on the enamel surface treatment with hydrochloric acid and application technique, infiltration duration, formulation of TEGDMA and ethanol in the resin composition, as well as the type and caries activity of involved teeth. Resin infiltration has superior penetrability compared to fissure sealant, casein phosphopeptide-amorphous calcium phosphate nanocomplexes, flowable composite, adhesive and fluoride varnish. Resin penetration depth may be a critical factor in forming a diffusion barrier and the effectiveness of infiltration in halting the progression of caries.

Roughness and Microhardness of Demineralized Enamel Treated with Resinous Infiltrants and Subjected to an Acid Challenge: An in vitro Study

Background:

Resinous infiltrating has proven effective in arresting incipient caries lesions.

Objective:

This study aimed to assess the penetration depth of an experimental resin-infiltrant (75% - TEGDMA, 25% - Bis-EMA, 1% - EDAB, 0.5% camphorquinone), compare it with commercial infiltrant Icon®, and analyze the surface-roughness and microhardness of the resin-materials infiltrated into tooth specimens, before and after pH cycling.

Methods:

To assess penetration depth, sound third molar specimens were submitted to ten de-remineralization cycles for incipient carious lesion induction and were then randomly divided into 2 groups (n=3): (I) Experimental Infiltrant (EI) and (II) Commercial Infiltrant Icon (CI). After resin infiltration into specimens, qualitative Confocal Fluorescence Microscopy images were captured. For roughness and microhardness assessment, new specimens were demineralized, then randomly divided into two groups (n=20): (I) Experimental Infiltrant (EI) and (II) Commercial Infiltrant Icon (CI) and submitted to roughness and microhardness readouts at the following time-intervals: (T1) sound tooth, (T2) white-spot caries lesion, (T3) resin material that infiltrated, and (T4) resin material that infiltrated and was exposed to pH-cycling. In statistical analyses, generalized linear models of repeated measures in time were applied, with a significance level of 5%.

Results:

The experimental infiltrant penetrated the carious lesion and exhibited lower roughness values after its application, even after pH cycling, similar to the CI. The microhardness value of the EI group was significantly lower in the last three-time intervals evaluated compared to CI.

Conclusion:

Experimental resin infiltrant was efficient in penetrating white spot lesions and reducing surface roughness; however, it did not increase surface microhardness.

Using Resin Infiltration Technique and Direct Composite Restorations for the Treatment of Carious Lesions with Different Depths

Minimally invasive treatment methods are of special interest in restorative dental practice, with numerous methods emerging in the last decade. Such methods are being developed to encompass various applications, an important one being the detection and treatment of caries in the early stages. White spot lesions are the earliest visible stage of the caries process. These lesions have a chalky, opaque appearance, which results in esthetic dissatisfaction. In contrast to the principles of minimally invasive dentistry, considerable amounts of sound tooth structure need to be sacrificed to get rid of these lesions. Therefore, caries infiltration has been introduced as an alternative treatment option for non-cavitated lesions. The resin infiltration technique only works in non-cavitated lesions. Replacement of lost dental tissue with resin composites remains the mainstay therapy in cases with cavity formation. This case report describes a case of caries with lesions of varying depths. In such cases, a combination of treatment methods may be used to provide satisfying esthetics with a minimally invasive approach.

Resin Infiltration of Non-Cavitated Enamel Lesions in Paediatric Dentistry: A Narrative Review

The resin infiltration (RI) technique was introduced as one of the minimal intervention dentistry strategies in addressing dental caries among the paediatric population. This technique used the low-viscosity resin monomer to infiltrate the non-cavitated carious lesion and other developmental enamel porosities, thus allowing the conservation of the tooth structure. This narrative review aims to explore the value of RI in Paediatric Dentistry. Through our search of the literature, the development of the material, their clinical applications and shortcomings, as well as the innovation that has been carried out to improve the current RI, were discussed. There are number of high-level evidence supporting the use of RI in arresting non-cavitated proximal caries lesions in primary and permanent teeth, but its efficacy in managing anterior white spot lesions is still unclear. Limited penetration depth, not radiopaque and questionable long-term colour and material stability were among the limitation of the material. Various laboratory-based studies have been conducted to improve the current properties of RI. Nevertheless, RI has emerged as one of the important micro-invasive techniques in addressing non-cavitated and anterior white-spot enamel lesions in children and adolescents with great success.

Evaluation of Enamel Acid Resistance and Whitening Effect of the CAP System

This study aimed to compare the effectiveness of a novel professional tooth-strengthening system and a conventional caries-prevention method that involved the use of high fluoride concentrations, to determine whether the system has a whitening effect. Bovine tooth-enamel samples were treated with fluoride gel (conventional APF method) or a mixture of citric acid gel, calcium phosphate (α-TCP), and fluoride gel, referred to as the CAP system; these treatments were performed to generate an acid-resistant layer on the enamel surface. For the evaluation of the acid resistance, a cyclic experiment, involving a 1-h remineralization and a 24-h acid treatment, was conducted thrice after the treatments. The height profiles were observed using a 3D-measuring laser microscope and the hardness was evaluated by Vickers hardness test. The morphological changes in the surface and cross-section of the enamel were observed by scanning electron microscopy. To evaluate the whitening effect, the enamel was ground until the color of the underlying dentin was recognizable; the CAP system was applied once, and the color change was measured using a color difference meter. As a result, it was confirmed that an acid-resistant layer was formed on the tooth surfaces treated with the CAP system, and a whitening effect was obtained.

Effects of hybrid inorganic-organic nanofibers on the properties of enamel resin infiltrants - An in vitro study

This in vitro study aimed to evaluate the overall mechanical properties of resin infiltrants doped with bioactive nanofibers and their ability in inhibiting enamel demineralization or achieving remineralization of the adjacent enamel to white spots. A commercial resin infiltrant (ICON, DMG) was doped with hybrid inorganic-organic nanofibers and analyzed for degree of conversion (DC, n = 3) and surface hardness (SH, n = 6). Subsequently, enamel specimens (6 × 4 × 2 mm³) were prepared and submitted to a demineralizing/remineralizing process to produce a subsurface caries-like lesion. The specimens were treated with one of the following materials: ICON infiltrant, DMG (control); ICON + nanofibers of poly-lactic acid (PLA)-filled with silica (PLA-SiO₂); ICON + nanofibers of (PLA)-filled with calcium incorporated into a silica network (SiO₂-CaP). Then, the specimens were subjected to a pH-cycling demineralizing/remineralizing model for 7 days at 37 °C. The %ΔSH change (after treatment), %SH loss and %SH recovery (after pH-cycling regimen) were calculated after SH evaluation (n = 9/group). The Ca/P weight ratio before and after pH-cycling regimen was evaluated through SEM/EDX. The results of DC were analyzed through the T-test (p < 0.05). ANOVA followed by Tukey's test (p < 0.05) was performed for hardness and EDX. A significant SH increase was observed in the ICON/SiO₂CaP group (p < 0.05). The ICON/PLA-SiO₂ presented higher DC values than the control group (p = 0.043). All groups presented significant difference in %ΔSH (p < 0.05), although the specimens treated with ICON/SiO₂CaP presented greater values. Regarding the %SHL and %SHR, the ICON/SiO₂CaP and ICON/PLA-SiO₂ were significantly different compared to the control group (p < 0.001). However, no difference was observed between the ICON/SiO₂CaP and ICON/PLA-SiO_2. The Ca/P ratio showed that the ICON/SiO₂CaP and ICON/PLA-SiO₂ after the pH-cycling regimen differed from sound enamel and modified infiltrants before pH-cycling. In conclusion, tailored hybrid nanofibers may be incorporated into enamel resin infiltrants without compromise the mechanical properties of such experimental materials. These latter can inhibit the demineralization of enamel and increase its hardness during pH-clycling challange.

Preventing and Arresting Primary Tooth Enamel Lesions Using Self- Assembling Peptide P11-4 In Vitro

Objectives

To evaluate self-assembling peptides (SAP) for caries prevention and arrest in primary tooth enamel in vitro.

Materials and Methods

Overall, 180 extracted primary teeth were used. In the prevention experiment (n = 20 samples per group), self-assembling peptide for prevention (SAPP), fluoride varnish/mouthwash (FV/FMW), casein-phosphopeptide amorphous-calcium phosphate (CPP-ACP), and nanohydroxyapatite (nHA) were applied. Samples were subjected to a demineralizing pH cycling for 14 days. In the arrest experiment (n = 15/group), 60 samples were pre-demineralized; induced lesions were treated using self-assembling peptide for repair (SAPR), FV, CPP-ACP plus fluoride, and resin infiltration (RI) and submitted to pH cycling. Mineral loss and its differences as well as lesion depth were determined using transversal microradiography. Numerical data were tested for normality using Shapiro-Wilk's test and were compared using Kruskal-Wallis test followed by pairwise comparisons utilizing multiple Mann-Whitney U tests with Bonferroni correction. The significance level was set at P < 0.05 within all tests.

Results

FV (median: -46.3 [interquartile range: 175.52] vol% × µm) and FMW (-33.35 [124.65] vol% × µm) prevented caries significantly more effectively than all other groups (P < 0.001), which did not show significant preventive effects. RI (median: 4949.70 [1637.20] vol% × µm) and FV (median = 6076.05 [5190.08] vol% × µm) arrested lesions, whereas SAPR and CPP-ACPF did not show such arrest.

Conclusions

FV and FMW showed the largest caries-preventive effect, whereas RI and FV arrested lesion progression in primary tooth enamel in vitro.