Laboratory Fracture Resilience of Hybrid Abutments Used in Oral Rehabilitation: A Systematic Review

Effect of abutment type and creep behavior on the mechanical properties of implant restorations in the anterior region: A finite element analysis

PURPOSE

This study aimed to assess the effect of abutment variation and creep on dental implant restorations.

MATERIALS AND METHODS

Three finite element analysis (FEA) models of implant restorations were created, which were restored by conventional one-piece abutment (CA), hybrid abutment crown (HAC), and multi-unit abutment (MUA). The contacts were considered intimate (no friction), except for implant/abutment, abutment/screw, and abutment/screw/crown (HAC) attachments. The related mechanical parameters were used to improve the authenticity of the study. Instantaneous loads and constant loads (100 s) of 130 N were applied at a 30° angle to the palatal portion of the crown. Results were qualitatively and quantitatively evaluated using the equivalent von Mises stress, micro-gap distance of the implant-abutment interface (IAI), preload changes, and safety index.

RESULTS

The stress state of each component differed depending on the restoration type, from CA and HAC to MUA. Implants and screws were the structures that suffered the most stress under instantaneous loads. Each metal structure exhibited a substantial decrease in stress during a constant loading period. The screws of the MUA abutment showed more preload loss (62.1 N) after constant loads for 100 s. MUA base produced less micro-gap (0.72 μm) at the IAI when it was compared with the CA group (0.93 μm) and HAC group (3.29 μm).

CONCLUSIONS

The abutment type influences the mechanical properties and performance of implant restorations. The creep effect decreases the maximum stress level and increases the safety factors of each structure, indicating that stress-related mechanical complications may not occur more easily.

Effect of Antirotational Two-Piece Titanium Base on the Vertical Misfit, Fatigue Behavior, Stress Concentration, and Fracture Load of Implant-Supported Zirconia Crowns

This study investigated the effects of antirotational titanium bases on the mechanical behavior of CAD/CAM titanium bases used for implant-supported prostheses. The aim was to assess the impact on the marginal fit, fatigue behavior, stress concentration, and fracture load of implant-supported CAD/CAM zirconia crowns. Forty titanium implants were divided into two groups: those with antirotational titanium bases (ARs) and those with rotational titanium bases (RTs). Torque loosening and vertical misfit were evaluated before and after cyclic fatigue testing (200 N, 2 Hz, 2 × 10⁶ cycles). Fracture resistance was assessed using a universal testing machine (1 mm/min, 1000 kgf), and failed specimens were examined with microscopy. Three-dimensional models were created, and FEA was used to calculate stress. Statistical analysis was performed on the in vitro test data using two-way analysis of variance and Tukey's test (α = 0.5). Results show that the presence of an antirotational feature between the implant and titanium base reduced preload loss and stress concentration compared to rotational titanium bases. However, there were no differences in vertical misfit and resistance to compressive load.