A Life Cycle Assessment of an Energy-Biochar Chain Involving a Gasification Plant in Italy

Life cycle assessment of greenhouse gas emissions for various feedstocks-based biochars as soil amendment

Anthropogenic greenhouse gas (GHG) emissions are a major factor influencing climate change. The application of biochar as a soil amendment may be an effective way to reduce GHG emissions. Life cycle assessment (LCA) is widely used to assess the impact of biochar as a soil amendment on GHG emissions. The methodology is effective in assessing the impacts of the various stages of the biochar life cycle on GHG emissions. However, because of the diversity of biochar types, it is difficult to summarize the regularity of biochar life cycle impacts on GHG emissions. This paper summarizes the pathways of biochar's effect on GHG emissions and in-depth analyzes the mechanism of biochar's influence on GHG emissions from the perspective of biochar properties. Finally, the review comprehensively analyzes the effects of different types of biochar feedstock on GHG emissions at the stages of feedstock pretreatment, preparation, and application of the life cycle. The conclusions are as follows: (1) Biochar affects GHG emissions in three ways: feedstock supply, pyrolysis process, and application process. (2) The impact of biochar on GHG emissions is influenced by a combination of the physicochemical properties of biochar. (3) Biochar has a positive impact (feedstock pretreatment stage and preparation stage) or a negative impact (application stage) on life cycle GHG emissions. (4) The carbon sequestration capacity of biochar varies by feedstock type. The ranking of carbon sequestration capacity is waste wood biochar (WWB) > crop straw biochar (CSB) > livestock manure biochar (LMB) > sewage sludge biochar (SSB).

Biochar as Alternative Material for Heavy Metal Adsorption from Groundwaters: Lab-Scale (Column) Experiment Review

The purpose of this manuscript is to present a review of laboratory experiments (including methodology and results) that use biochar, a specific carbon obtained by a pyrolysis process from different feedstocks, as an alternative material for heavy metal adsorption from groundwater. In recent years, many studies have been conducted regarding the application of innovative materials to water decontamination to develop a more sustainable approach to remediation processes. The use of biochar for groundwater remediation has particularly attracted the interest of researchers because it permits the reuse of materials that would be otherwise disposed of, in accordance with circular economy, and reduces the generation of greenhouse gases if compared to the use of virgin materials. A review of the different approaches and results reported in the current literature could be useful because when applying remediation technologies at the field scale, a preliminary phase in which the suitability of the adsorbent is evaluated at the lab scale is often necessary. This paper is therefore organised with a short description of the involved metals and of the biochar production and composition. A comprehensive analysis of the current knowledge related to the use of biochar in groundwater remediation at the laboratory scale to obtain the characteristic parameters of the process that are necessary for the upscaling of the technology at the field scale is also presented. An overview of the results achieved using different experimental conditions, such as the chemical properties and dosage of biochar as well as heavy metal concentrations with their different values of pH, is reported. At the end, numerical studies useful for the interpretation of the experiment results are introduced.

A Critical Review of Data Science Applications in Resource Recovery and Carbon Capture from Organic Waste

Municipal and agricultural organic waste can be treated to recover energy, nutrients, and carbon through resource recovery and carbon capture (RRCC) technologies such as anaerobic digestion, struvite precipitation, and pyrolysis. Data science could benefit such technologies by improving their efficiency through data-driven process modeling along with reducing environmental and economic burdens via life cycle assessment (LCA) and techno-economic analysis (TEA), respectively. We critically reviewed 616 peer-reviewed articles on the use of data science in RRCC published during 2002-2022. Although applications of machine learning (ML) methods have drastically increased over time for modeling RRCC technologies, the reviewed studies exhibited significant knowledge gaps at various model development stages. In terms of sustainability, an increasing number of studies included LCA with TEA to quantify both environmental and economic impacts of RRCC. Integration of ML methods with LCA and TEA has the potential to cost-effectively investigate the trade-off between efficiency and sustainability of RRCC, although the literature lacked such integration of techniques. Therefore, we propose an integrated data science framework to inform efficient and sustainable RRCC from organic waste based on the review. Overall, the findings from this review can inform practitioners about the effective utilization of various data science methods for real-world implementation of RRCC technologies.

Removal of benzene, MTBE and toluene from contaminated waters using biochar-based liquid activated carbon

Fuel components such as benzene, toluene, and methyl tertiary-butyl ether (MTBE) are frequently detected pollutants in groundwater resources. Ex-situ remediation technologies by activated carbon have been used for treatment for many years. However, due to high cost of these technology, more attention has been given to the in-situ remediation methods of contaminated groundwaters using liquid carbon adsorbents. Literature search showed limited studies on using adsorbents in liquid form for the removal of such contaminants. Therefore, this lab-scale study investigates the capacity of using raw biochar-based liquid activated carbon and iron-modified biochar-based liquid activated carbon to remove these pollutants. The adsorption efficiency of the synthesized liquid activated carbon and iron-modified liquid activated carbon mixed with sand, limestone, and 1:1 mixture of sand/limestone, was tested using batch suspension experiments. Adsorption by granular activated carbon was also investigated for comparison with liquid activated carbon. Results of the study revealed that mixing of liquid activated carbon or LAC-Fe on subsurface materials had not improved the removal efficiency of MTBE. At the same time, it showed a slight improvement in the adsorption efficiency of benzene and toluene. In all cases, the removal by GAC was higher with around 80% and 90% for MTBE and BT, respectively. Results also showed that benzene and toluene were better removed by liquid activated carbon and iron-modified liquid activated carbon (∼ 40%) than MTBE (∼ 20%). It is also found that water chemistry (i.e., salinity and pH) had insignificant effects on the removal efficiency of pollutants under the study conditions. It can be concluded that more research is needed to improve the capacity of biochar-based liquid-activated carbon in removing MTBE, benzene and toluene compounds that will lead to improve the utilization of liquid activated carbon for the in-situ remediation of contaminated groundwaters.

Physical-Chemical Characterization of Different Carbon-Based Sorbents for Environmental Applications

Biochar has been used in various applications, e.g., as a soil conditioner and in remediation of contaminated water, wastewater, and gaseous emissions. In the latter application, biochar was shown to be a suitable alternative to activated carbon, providing high treatment efficiency. Since biochar is a by-product of waste pyrolysis, its use allows for compliance with circular economics. Thus, this research aims to obtain a detailed characterization of three carbonaceous materials: an activated carbon (CARBOSORB NC 1240^®) and two biochars (RE-CHAR^® and AMBIOTON^®). In particular, the objective of this work is to compare the properties of three carbonaceous materials to evaluate whether the application of the two biochars is the same as that of activated carbon. The characterization included, among others, particle size distribution, elemental analysis, pH, scanning electron microscope, pore volume, specific surface area, and ionic exchange capacity. The results showed that CARBOSORB NC 1240^® presented a higher specific surface (1126.64 m²/g) than AMBIOTON^® (256.23 m²/g) and RE-CHAR^® (280.25 m²/g). Both biochar and activated carbon belong to the category of mesoporous media, showing a pore size between 2 and 50 nm (20-500 Å). Moreover, the chemical composition analysis shows similar C, H, and N composition in the three carbonaceous materials while a higher O composition in RE-CHAR^® (9.9%) than in CARBOSORB NC 1240 ^® (2.67%) and AMBIOTON^® (1.10%). Differences in physical and chemical properties are determined by the feedstock and pyrolysis or gasification temperature. The results obtained allowed to compare the selected materials among each other and with other carbonaceous adsorbents.

Simultaneous adsorption of toxic metals in binary systems using peanut and sheanut shells biochars

Converting peanut and sheanut shells into biochar is a smart strategy for recycling agricultural waste. Biochar was produced from peanut and sheanut shells at temperatures of 350 ± 5 °C and 700 ± 5 °C. The adsorption capacities for lead (Pb²⁺), cadmium (Cd²⁺) and mercury (Hg²⁺) in the binary systems were evaluated. In the binary systems with concentrations of 5 : 5 mg/L, 10 : 10 mg/L, 25 : 25 mg/L and 50 : 50 mg/L the removal efficiencies of GB350, SB350, GS350, GB700, SB700 and GS700 were 100% for Pb²⁺ and 88.70%–99.46% for Cd²⁺, 98.20%–100% for Pb²⁺ and 100% for Hg²⁺, 79.30%–100% for Cd²⁺ and 99.96%–100% for Hg²⁺. The higher adsorption percentages of Pb²⁺, Cd²⁺ and Hg²⁺ by the biochar in the binary systems indicated that the pH values of the solutions were good and suitable for adsorption. The biochar from peanut and sheanut shells showed excellent capacity to remove Pb, Cd and Hg in the binary systems. The Langmuir model (0.3351 ≤ R² ≤ 0.9901) was more suitable than the Freundlich model (0.0014 ≤ R² ≤ 0.9994) for the adsorption of toxic metal ions onto the biochar in the binary systems. The interactive effects of the binary mixtures in the aqueous solution of Pb²⁺, Cd²⁺, and Hg²⁺ were found to be either antagonistic or synergistic. Peanut and sheanut shell biochar were rich in calcium, potassium, magnesium, and sodium, and phosphates affected the mechanisms of Pb and Cd adsorption. The high sulphur content might have influenced the mechanism of Hg adsorption in the aqueous solutions on peanut and sheanut shell biochar. These results suggest that peanut and sheanut shell biochar have enormous potential and are suitable for adsorption of Pb²⁺, Cd²⁺ and Hg²⁺ in wastewater and polluted soil. Therefore, their effectiveness should be further tested in an actual water polluted environment.

Use of Typical Wastes as Biochars in Removing Diethyl Phthalate (Det) from Water

Diethyl phthalate (DEP), one of the six typical PAEs priority pollutants declared by the US EPA, has attracted tremendous attention due to its widespread pollution and was selected as the adsorbate in this study. Properties of biochar samples obtained from three different feedstocks, i.e., sawdust (SDBC), rice straw (RSBC), and giant reed (GRBC), pyrolyzed at 400 °C as well as their ability to adsorb DEP from an aqueous solution were investigated. The results showed that the adsorption kinetics were well fitted with the pseudo-second-order model (R2 > 0.99) and the intraparticle diffusion model (R2 > 0.98). The maximal adsorption capacity of the DEP by the prepared biochar was in an order of GRBC (46.04 mg g−1) > RSBC (31.54 mg g−1) > and SDBC (18.39 mg g−1). The higher adsorption capacity of DEP by GRBC is mainly attributed to the higher surface area. The reduction in adsorption capacity of the biochar against DEP with an increase in the solution pH (from 2.5 to 10.0) was possibly due to promoting the electrostatic repulsion between the DEP and the surface of the biochar. However, the increasing sodium ionic strength promoted the adsorption of the biochar, which could be interpreted by the reduced solubility of the DEP due to enhancing “salting out” effects as increasing sodium concentration. In addition, it was favorable for the adsorption of DEP onto the biochars at a lower temperature (15 °C) and the calculated ∆G0 was less than zero, indicating that the adsorption was a spontaneous and exothermic process. These experiments designate that these derived biochars can be used as an inexpensive adsorbent for the purification of PAEs contaminated water.

A Scoping Review on Environmental, Economic, and Social Impacts of the Gasification Processes

In recent years, computer-based simulations have been used to enhance production processes, and sustainable industrial strategies are increasingly being considered in the manufacturing industry. In order to evaluate the performance of a gasification process, the Life Cycle Thinking (LCT) technique gathers relevant impact assessment tools to offer quantitative indications across different domains. Following the PRISMA guidelines, the present paper undertakes a scoping review of gasification processes’ environmental, economic, and social impacts to reveal how LCT approaches coping with sustainability. This report categorizes the examined studies on the gasification process (from 2017 to 2022) through the lens of LCT, discussing the challenges and opportunities. These studies have investigated a variety of biomass feedstock, assessment strategies and tools, geographical span, bioproducts, and databases. The results show that among LCT approaches, by far, the highest interest belonged to life cycle assessment (LCA), followed by life cycle cost (LCC). Only a few studies have addressed exergetic life cycle assessment (ELCA), life cycle energy assessment (LCEA), social impact assessment (SIA), consequential life cycle assessment (CLCA), and water footprint (WLCA). SimaPro® (PRé Consultants, Netherlands), GaBi® (sphere, USA), and OpenLCA (GreenDelta, Germany) demonstrated the greatest contribution. Uncertainty analysis (Monte Carlo approach and sensitivity analysis) was conducted in almost half of the investigations. Most importantly, the results confirm that it is challenging or impossible to compare the environmental impacts of the gasification process with other alternatives since the results may differ based on the methodology, criteria, or presumptions. While gasification performed well in mitigating negative environmental consequences, it is not always the greatest solution compared to other technologies.

Effects of solid waste-based soil conditioner and arbuscular mycorrhizal fungi on crop productivity and heavy metal distribution in foxtail millet (Setaria italica)

Shanxi is a large coal-producing province, and it also produces a lot of solid waste. Solid waste can leach heavy metals, which can harm soil and affect food security at the beginning of the food chain. To investigate the impacts of solid waste-based soil conditioner (SWSC) and arbuscular mycorrhizal fungi (AMF) on millet safety and crop production, a field experiment with foxtail millet (Setaria italica) was conducted in Tunliu. The results of this study demonstrate that SWSC + AMF, SWSC and AMF can increase millet yield by 28.0%, 27.1% and 19.5%, respectively, compared with CK. This is mainly due to increased mycorrhizal infection. Besides, the pollution index (P_i) and the Nemerow-integrated pollution index (P_N) of the soil with SWSC and AMF were both below 0.7, indicating safe pollution levels. The application of AMF and SWSC inhibits plants from absorbing heavy metals from the soil and reduces the TF_root/soil of the millet. SWSC + AMF application inhibited the transfer of heavy metals from the roots to the upper part of the ground and reduced the TF_shoot/root of the millet. The TF_grain/soil of the millet was below 1. The HQ and HI of the millet grains did not exceed 1, indicating the absence of a potential health risk. Therefore, SWSC combined with AMF is applicable for millet production in Tunliu, and the combined treatment can decrease heavy metal phytoavailability and post-harvest transfer risks. This work provides a way to utilize solid waste while also improving millet yields in dry farming. Based on the review, we suggested future researches to better understand the mechanisms of SWSC + AMF long-term application to promote awareness on its role over time through alterations in its surface chemistry, soil microbial community and environmental implications.

Potential of biochar use in building materials

A critical review of the articles dealing with biochar in terms of the reuse of biomass waste in building materials and its impact on material properties was conducted using five different electronic databases; thirteen articles were selected for this critical review. Biochar was used as a replacement for cement and aggregate in cementitious composites and as an addition in wood polypropylene composites and plasters. The biochar dosages ranged from 0.5% to 40%; in most composites, the addition of biochar increased strength and reduced thermal conductivity and the bulk density of fresh mortars. Also, biochar dosages of 0.5-2% decreased, while dosages of 10-40% increased water absorption and penetration on cementitious composites. The selected studies mainly introduced biochar use in building materials as a means of biomass waste reduction and its reuse for various purposes, while carbon footprint reduction was addressed in only a few of them. Biochar-containing building material's capability of capturing CO₂ from the air was also observed (0.033 mmol CO₂ g_biochar^-1 to 0.138 mmol CO₂ g_biochar^-1). The results also showed that mortars with CO₂-unsaturated biochar had better mechanical and physical properties than mortars with CO₂-saturated biochar. Selected studies showed biochar-containing building materials have a great potential for carbon footprint reduction. However, there is a lack of comprehensive studies about biochar use in building materials concerning climate change mitigation.

Use of Biochar in Asphalts: Review

The growth of the world population has increased the production of wastes. These are generally incinerated or deposited in outdoor landfills, which impacts the environment and affects human health. A technique that allows to reuse of wastes and diminishes adverse effects on the environment is pyrolysis. Through this technique, a material known as Biochar (BC) is produced, which has proven to have interesting physical-chemical properties for it to be used as an asphalt modifier, and simultaneously, helps to mitigate negative impacts on the environment. The foregoing article presents a bibliographical review on the use of BC as a modifier for asphalt binders and asphalt mixes. This has the purpose of becoming a starting point for future research efforts. In the reviewed literature, there was no review found on this topic. In general terms, BC increases the performance of asphalt binders in high-temperature climates, and tends to reduce its performance in low-temperature ones. Few studies have evaluated the performance of BC on asphalt mixes and the long-term properties associated with durability. Based on the reviewed literature, at the end of the article, recommendations are provided for future study topics.