Comparison of In Vivo Intradiscal Pressure between Sitting and Standing in Human Lumbar Spine: A Systematic Review and Meta-Analysis

Epidural pressure measurement using a fiber-optic sensor (proof-of-principle in vivo animal trial)

BACKGROUND

An increase in epidural pressure around the stenosis has been observed in patients with lumbar spinal stenosis (LSS) with positive signs of sedimentation or redundant nerve roots. Further analysis of the pressure conditions in the stenotic area would be of great interest. We hypothesized that it would be possible to determine the physiological parameters of the epidural pulse wave and its course in pathological stenosis as a basis for objective identification of LSS based on pressure using a new measuring method with continuous spatial and temporal resolution.

METHODS

We performed a single-case proof-of-principle in vivo animal trial and used a newly developed hybrid pressure-measurement probe with a fiber-tip Fabry-Pérot interferometer and several fiber Bragg gratings (FBG).

RESULTS

With reproducible precision, we determined the mean epidural pressure to be 7.5 mmHg and the peak-to-peak value to be 4-5 mmHg. When analyzing the pressure measured by an FBG array, both the heart and respiratory rates can be precisely determined. This study was the first to measure the pulse wave velocity of the cerebrospinal fluid pressure wave as 0.97 m/s using the newly developed pressure probe. A simulated LSS was detected in real time and located exactly.

CONCLUSIONS

The developed fiber-optic pressure sensor probe enables a new objective measurement of epidural pressure. We confirmed our hypothesis that physiological parameters of the epidural pulse wave can be determined and that it is possible to identify an LSS.

Correlation between clinical and MRI findings in disc herniation in the lumbosacral region

AIM OF THE STUDY

To compare clinical findings with MRI findings and evaluate the role of physical examination in the diagnosis, localization of the level, site, size, and type of lumbosacral disc herniation.

MATERIALS AND METHODS

A prospective study of 104 patients with low back pain and/or sciatica was conducted et al.-Kindy Teaching Hospital between January to December 2022. All Participants were evaluated via history, clinical examination, and MRI. One hundred patients had a disc herniation in the lumbosacral region, which was confirmed by MRI assessment after clinical presentation and physical examination. The data were collected and analyzed by the chi-square test.

RESULTS

Most of the patients (84%) experienced pain in the lower back that radiated to the lower limb or limbs, and nearly half of the patients experienced paresthesia (48%). Sixty-six percent of the patients had a scoliotic list; limitation of lumbar spine movements was common in 96%, and a decrease in the straight leg raising test (SLR) was detected in 98%. Cross SLR "Well test" was positive in 64% of patients. The femoral nerve stretch test was positive in 40% of patients. Sixty-four percent were presented with neurological deficits, 42% with affected L5 nerve roots, 22% with affected S1 nerve roots, and no patients with L4 affected. Twenty-two percent showed a positive SLR test with an angle between 41 and 70°.

CONCLUSION

Proper correlation between clinical and MRI will help determine the lesion's level, horizontal location, herniation type, and herniated disc size in the lumbosacral region and achieve a more accurate diagnosis.

Finite Element Analysis of Stress Distribution and Range of Motion in Discogenic Back Pain

OBJECTIVE

Precise knowledge regarding the mechanical stress applied to the intervertebral disc following each individual spine motion enables physicians and patients to understand how people with discogenic back pain should be guided in their exercises and which spine motions to specifically avoid. We created an intervertebral disc degeneration model and conducted a finite element (FE) analysis of loaded stresses following each spinal posture or motion.

METHODS

A 3-dimensional FE model of intervertebral disc degeneration at L4-5 was constructed. The intervertebral disc degeneration model was created according to the modified Dallas discogram scale. The von Mises stress and range of motion (ROM) regarding the intervertebral discs and the endplates were analyzed.

RESULTS

We observed that mechanical stresses loaded onto the intervertebral discs were similar during flexion, extension, and lateral bending, which were greater than those occurring during torsion. Based on the comparison among the grades divided by the modified Dallas discogram scale, the mechanical stress during extension was greater in grades 3-5 than it was during the others. During extension, the mechanical stress loaded onto the intervertebral disc and endplate was greatest in the posterior portion. Mechanical stresses loaded onto the intervertebral disc were greater in grades 3-5 compared to those in grades 0-2.

CONCLUSION

Our findings suggest that it might be beneficial for patients experiencing discogenic back pain to maintain a neutral posture in their lumbar spine when engaging in daily activities and exercises, especially those suffering from significant intravertebral disc degeneration.

Biomechanical repercussion of sitting posture on lumbar intervertebral discs: A systematic review

BACKGROUND

The static sitting position contributes to increased pressure on the lumbar intervertebral disc, which can lead to dehydration and decreased disc height.

OBJECTIVE

To systematically investigate the of sitting posture on degeneration of the lumbar intervertebral disc.

MATERIALS AND METHODS

One researcher carried out a systematic literature search of articles with no language or time limits. Studies from 2006 to 2018 were found. The searches in all databases were carried out on January 28, 2022, using the following databases: Pubmed, Scopus, Embase, Cochrane, and Physiotherapy Evidence Database (PEDro) databases, and for the grey literature: Google scholar, CAPES Thesis and Dissertation Bank, and Open Grey. The acronym PECOS was used to formulate the question focus of this study: P (population) - male and female subjects; E (exposure) - sitting posture; C (comparison) - other posture or sitting posture in different periods; O (outcomes) - height and degeneration of the lumbar intervertebral disc(s), imaging exam; and S (study) - cross-sectional and case control.

RESULTS

The risk of bias was in its moderate totality in its outcome: height and degeneration of the lumbar intervertebral disc(s) - imaging. Of the four selected studies, three found a decrease in the height of the disc(s) in sitting posture.

CONCLUSION

The individual data from the manuscripts suggest that the sitting posture causes a reduction in the height of the lumbar intervertebral disc. It was also concluded that there is a need for new primary studies with a more in-depth design and sample size.

Rotation-traction manipulation induced intradiskal pressure changes in cervical spine-an in vitro study

Objective: Evaluate the effect of rotation-traction manipulation on intradiskal pressure in human cervical spine specimen with different force and duration parameters, and compare the intradiskal pressure changes between rotation-traction manipulation and traction. Methods: Seven human cervical spine specimens were included in this study. The intradiskal pressure was measured by miniature pressure sensor implanting in the nucleus pulposus. rotation-traction manipulation and cervical spine traction were simulated using the MTS biomechanical machine. Varied thrust forces (50N, 150N, and 250N) and durations (0.05 s, 0.1 s, and 0.15 s) were applied during rotation-traction manipulation with Intradiscal pressure recorded in the neutral position, rotation-anteflexion position, preloading, and thrusting phases. Futuremore, we documented changes in intradiscal pressure during cervical spine traction with different loading forces (50N, 150N, and 250N). And a comparative analysis was performed to discern the impact on intradiscal pressure between manipulation and traction. Results: Manipulation application induced a significant reduction in intradiscal pressure during preloading and thrusting phases for each cervical intervertebral disc (p < 0.05). When adjusting thrust parameters, a discernible decrease in intradiscal pressure was observed with increasing thrust force, and the variations between different thrust forces were statistically significant (p < 0.05). Conversely, changes in duration did not yield a significant impact on intradiscal pressure (p > 0.05). Additionally, after traction with varying loading forces (50N, 150N, 250N), a noteworthy decrease in intradiscal pressure was observed (p < 0.05). And a comparative analysis revealed that rotation-traction manipulation more markedly reduced intradiscal pressure compared to traction alone (p < 0.05). Conclusion: Both rotation-traction manipulation and cervical spine traction can reduce intradiscal pressure, exhibiting a positive correlation with force. Notably, manipulation elicits more pronounced and immediate decompression effect, contributing a potential biomechanical rationale for its therapeutic efficacy.

The Relationship between Sleeping Position and Sleep Quality: A Flexible Sensor-Based Study

The use of flexible wearable sensors to monitor the impact of sleeping position and turning frequency on sleep and to study sleep patterns can help bedridden patients heal and recover. The flexible wearable sleeping-position monitoring device was designed and developed using a flexible angle sensor and a six-axis motion sensor to measure the dynamic changes in body posture during sleep. Based on the changes in the output parameters of the flexible angle sensor and the six-axis motion sensor, we determined the change in the subject's lying position, verifying and analyzing the relationship between lying position preference, turning frequency, and sleep quality in healthy subjects. The sleeping-position monitoring device was worn by 13 subjects (7 males and 6 females) without sleep disorders before the sleep experiment. They performed more than 50 sleeping-position changes to ensure the accuracy of the monitoring device. Subjects slept in their beds for 8 h per night for 15 nights. During that time, they wore the sleeping-position monitoring device and a wristband sleep-monitoring bracelet on their left hand, and gathered the subjective sleep data using questionnaires. The results show that the most critical influencing factors are sleeping-position preference and frequency of turning. Data analysis reveals that subjects with a preference for right-sided lying and a lower frequency of turning had better sleep quality.

Neglected problem: Influence of school bag on lumbar segment in children

BACKGROUND AND OBJECTIVES

School bag (SB) load causes significant changes in the height and symmetry of the intervertebral discs at each level of the spine from T12-L1 to L5-S1. This study aims to determine the change in the size of the lumbar segment angle at a particularly critical point L3-L4 of the spine in relation to the load of the average weight of SB in healthy male children (students) at standing and after 2-minute gait.

METHODS

47 boys, aged 12.2 ± 0.92 years, underwent photogrammetric measurements in the sagittal plane in statics and dynamics, walking on a laboratory treadmill. Measurements were repeated with the weight of SB with a constant load of 6,251 kg, which represents 13.78% of the average body weight of our sample. The lumbar angle (LA) connecting the point of the big toe, the lumbar point L3-L4 and the processus spinosus C7 was measured. In gait, LA was measured in the phases of the middle support and the initial contact of the heel.

RESULTS

T-test of paired samples was used to estimate the change in LA at standing from 4.953° and walking phases from 6.295° to 7.332° in relation to the unloaded state, and the value of the effect size (ES) indicates that the impact of SB load is significant.

CONCLUSIONS

Cumulatively, microtraumas caused by SB load significantly affect the increase in intervertebral pressure at the L3-L4 point, which is susceptible to degenerative processes and which can be the cause of lumbar syndrome (LS). Preventive measures are needed in order to lighten SB in this population and introduce up to 10% of students' body weight into the safe zone.