Insights into Corrosion Inhibition Behavior of a 5-Mercapto-1, 2, 4-triazole Derivative for Mild Steel in Hydrochloric Acid Solution: Experimental and DFT Studies

Multi-method evaluation of a 2-(1,3,4-thiadiazole-2-yl)pyrrolidine corrosion inhibitor for mild steel in HCl: combining gravimetric, electrochemical, and DFT approaches

The corrosion inhibition properties of 2-(1,3,4-thiadiazole-2-yl)pyrrolidine (2-TP) on mild steel in a 1 M HCl solution were investigated using weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) and open circuit potential (OCP) measurements. In addition, DFT calculations were performed on 2-TP. The polarization curves revealed that 2-TP is a mixed-type inhibitor. The results indicate that 2-TP is an effective inhibitor for mild steel corrosion in a 1.0 M HCl solution, with an inhibition efficiency of 94.6% at 0.5 mM 2-TP. The study also examined the impact of temperature, revealing that the inhibition efficiency increases with an increasing concentration of 2-TP and decreases with a rise in temperature. The adsorption of the inhibitor on the mild steel surface followed the Langmuir adsorption isotherm, and the free energy value indicated that the adsorption of 2-TP is a spontaneous process that involves both physical and chemical adsorption mechanisms. The DFT calculations showed that the adsorption of 2-TP on the mild steel surface is mainly through the interaction of the lone pair of electrons on the nitrogen atom of the thiadiazole ring with the metal surface. The results obtained from the weight loss, potentiodynamic polarization, EIS and OCP measurements were in good agreement with each other and confirmed the effectiveness of 2-TP as a corrosion inhibitor for mild steel in 1.0 M HCl solution. Overall, the study demonstrates the potential use of 2-TP as a corrosion inhibitor in acid environments.

Palmitic acid-based amide as a corrosion inhibitor for mild steel in 1M HCl

Due to growing environmental concerns and regulations limiting the use of harmful and toxic synthetic corrosion inhibitors, there is a high demand for sustainable corrosion inhibitors. In this study, a green and rapid technique was used to synthesize amide N-(4-aminobutyl)palmitamide (BAPA) which yielded 91.17% of the product within 2 min, compared to a low yield of 75-80% and a very long 8-10 h reaction time with the conventional thermal condensation method. The chemical structure of BAPA was analyzed by FT-IR, 1HNMR and 13CNMR spectra, as well as CHNS elemental analysis. When applied to mild steel exposed to 1 M HCl, BAPA delayed and reduced corrosion by adsorbing to the steel surface to form a protective layer. The inhibition efficiency increased with increasing amide concentration, and maximal inhibition of 91.5% was observed at 0.5 mM BAPA. The adsorption of BAPA on mild steel in an acidic solution was studied and inhibition performance was correlated with the calculated adsorption-free energy ΔGads, indicating good agreement between the experimental and adsorption findings. Surface morphology of untreated and treated mild steel coupons was evaluated by SEM, and based on density functional theory (DFT) computations and atomic charges analysis, a stronger interaction was observed between BAPA and mild steel surface leading to the formation of a compact protective film on the metallic surface. This protective film is attributed to the presence of nitrogen atoms and carbonyl group in the chemical structure of BAPA.

Experimental and Quantum Chemical Investigations on the Anticorrosion Efficiency of a Nicotinehydrazide Derivative for Mild Steel in HCl

A corrosion inhibitor namely N′-(4-hydroxy-3-methoxybenzylidene) nicotinohydrazide was synthesized and the inhibition efficiency of the investigated inhibitor toward the mild steel corrosion in 1 M HCl was studied. The anticorrosion effect has been investigated by weight loss (WL) techniques and electrochemical analysis includes potentiodynamic polarization (PDP) studies and electrochemical impedance spectroscopy (EIS). The current investigation has demonstrated that the tested inhibitor is suitable in corrosive environment and the inhibitive efficacy up to 97% in 1 M HCl. PDP measurements showed that the nicotinohydrazide is a mixed type inhibitor. EIS measurements showed that an increase in the inhibitory concentration leads to an increase in the charge transfer resistance (Rct) and a decrease in the double-layer capacitance (Cdl). Experimental results for the inhibitory performance of WL methods and electrochemical techniques (PDP and EIS) are in good agreement. The tested inhibitor molecules adsorbed on the surface of mild steel in a hydrochloric acid solution followed Langmuir’s isothermal adsorption. Quantum chemical parameters based on density function theory (DFT) techniques were conducted on oxygen/nitrogen-bearing heterocyclic molecule employed as a corrosion inhibitor for mild steel in HCl to evaluate the correlation between the inhibitor structure and inhibitory performance. The parameters including the energy gap (ΔE), dipole moment (μ), electronegativity (χ), electron affinity (A), global hardness (η), softness (σ), ionization potential (I), the fraction of electrons transferred (ΔN), the highest occupied molecular orbital energy (EHOMO), and the lowest unoccupied molecular orbital energy (ELUMO) were also calculated and were in good agreement with the experimental results.

Weight Loss, Thermodynamics, SEM, and Electrochemical Studies on N-2-Methylbenzylidene-4-antipyrineamine as an Inhibitor for Mild Steel Corrosion in Hydrochloric Acid

The use of N-2-methylbenzylidene-4-antipyrineamine as an acid corrosion inhibitor for mild steel surfaces in hydrochloric acid is discussed in this article by means of weight loss, electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM) methods. The experimental findings exhibited that N-2-methylbenzylidene-4-antipyrineamine is a significant corrosion inhibitor for the mild steel in 1.0 M HCl solution and that its protection efficiency touches the peak at 5 × 10–4 M, exhibiting 91.8% for N-2-methylbenzylidene-4-antipyrineamine. The inhibitory efficiency increases as the inhibitor concentration rises and reduces as the temperature rises. Temperature has a significant impact on corrosion and blocking activities, which is extensively examined and explained. According to the gravimetric results, the examined inhibitor inhibits mild steel surface corrosion by providing a barrier at the metal–hydrochloric acid medium interface. Thermodynamic characteristics were combined with a quantum chemistry investigation using density functional theory to provide more insight into the inhibitory effect mechanism. The tested inhibitor adsorbs on the mild steel surface based on Langmuir’s adsorption isotherm method.