Enhanced CO₂ Adsorption on Activated Carbon Fibers Grafted with Nitrogen-Doped Carbon Nanotubes

Study of CO2 adsorption on carbon aerogel fibers prepared by electrospinning

The exacerbation of climate change has made the development of alternative and sustainable technologies to achieve carbon neutrality an urgent matter. The intricate preparation and arduous recovery of conventionally prepared CO2 solid adsorbents make their large-scale application a significant challenge, which significantly limits the application of the adsorbent. To address this problem, we have innovatively adopted a novel strategy of electrospinning and one-step carbonization to fabricate microporous carbon aerogel fibers (CAFs) as solid adsorbents for CO2. This method offers the advantages of a simple process, cost-effectiveness, and stable performance. The designed CAFs possess a high specific surface area (1188.628 m2/g), an appropriate distribution of pore size (0.54-0.64 nm), and about 15 at% oxygen-containing functional groups without activation or doping. At 0 °C, the CAFs-800 (800 is the carbonization temperature) exhibit a maximum capture capacity of 4.25 mmol/g, and after 5 times cycles, the adsorption capacity remains above 97%; at 25 °C, the maximum capture capacity reaches 3.57 mmol/g of CAFs-800, surpassing similar materials by more than 20%, demonstrating excellent adsorption capacity and stability towards CO2. These results indicate that the CAFs hold great promise for CO2 capture and storage with exceptional advantages.

A green approach towards sorption of CO2 on waste derived biochar

Carbon capture technologies have advanced in recent years to meet the ever-increasing quest to minimize excessive anthropogenic CO₂ emissions. The most promising option for CO₂ control has been identified as carbon capture and storage. Among the numerous sorbents, char generated from biomass thermal conversion has shown to be an efficient CO₂ adsorbent. This study examines various characteristics that can be used to increase the yield of biochar suited for carbon sequestration. This review gives recent research progress in the area, stressing the variations and consequences of various preparation processes on textural features such as surface area, pore size and sorption performance with respect to CO₂'s sorption capacity. The adjoining gaps discovered in this field have also been highlighted herewith, which will serve as future work possibility. It aims to analyse and describe the possibilities and potential of employing pristine and modified biochar as a medium of CO₂ capture. It also examines the parameters that influence biochar's CO₂ adsorption ability and pertinent challenges regarding the production of biochar-based CO₂ sorbent materials.

Physical-Chemical Characterization of Different Carbon-Based Sorbents for Environmental Applications

Biochar has been used in various applications, e.g., as a soil conditioner and in remediation of contaminated water, wastewater, and gaseous emissions. In the latter application, biochar was shown to be a suitable alternative to activated carbon, providing high treatment efficiency. Since biochar is a by-product of waste pyrolysis, its use allows for compliance with circular economics. Thus, this research aims to obtain a detailed characterization of three carbonaceous materials: an activated carbon (CARBOSORB NC 1240^®) and two biochars (RE-CHAR^® and AMBIOTON^®). In particular, the objective of this work is to compare the properties of three carbonaceous materials to evaluate whether the application of the two biochars is the same as that of activated carbon. The characterization included, among others, particle size distribution, elemental analysis, pH, scanning electron microscope, pore volume, specific surface area, and ionic exchange capacity. The results showed that CARBOSORB NC 1240^® presented a higher specific surface (1126.64 m²/g) than AMBIOTON^® (256.23 m²/g) and RE-CHAR^® (280.25 m²/g). Both biochar and activated carbon belong to the category of mesoporous media, showing a pore size between 2 and 50 nm (20-500 Å). Moreover, the chemical composition analysis shows similar C, H, and N composition in the three carbonaceous materials while a higher O composition in RE-CHAR^® (9.9%) than in CARBOSORB NC 1240 ^® (2.67%) and AMBIOTON^® (1.10%). Differences in physical and chemical properties are determined by the feedstock and pyrolysis or gasification temperature. The results obtained allowed to compare the selected materials among each other and with other carbonaceous adsorbents.

The Effect of the Modification of Carbon Spheres with ZnCl2 on the Adsorption Properties towards CO2

Zinc chloride and potassium oxalate are often applied as activating agents for carbon materials. In this work, we present the preparation of ZnO/carbon spheres composites using resorcinol-formaldehyde resin as a carbon source in a solvothermal reactor heated with microwaves. Zinc chloride as a zinc oxide source and potassium oxalate as an activating agent were applied. The effect of their addition and preparation conditions on the adsorption properties towards carbon dioxide at 0 °C and 25 °C were investigated. Additionally, for all tested sorbents, the CO2 sorption tests at 40 °C, carried out utilizing a thermobalance, confirmed the trend of sorption capacity measured at 0 and 25 °C. Furthermore, the sample activated using potassium oxalate and modified using zinc chloride (a carbon-to-zinc ratio equal to 10:1) displayed not only a high CO2 adsorption capacity (2.69 mmol CO2/g at 40 °C) but also exhibited a stable performance during the consecutive multicycle adsorption–desorption process.

Carbon Dioxide Adsorption on Carbon Nanofibers with Different Porous Structures

Electrospinning techniques have become an efficient way to produce continuous and porous carbon nanofibers. In view of CO2 capture as one of the important works for alleviating global warming, this study intended to synthesize polyacrylonitrile (PAN)-based activated carbon nanofibers (ACNFs) using electrospinning processes for CO2 capture. Different structures of PAN-based ACNFs were prepared, including solid, hollow, and porous nanofibers, where poly(methyl methacrylate) (PMMA) was selected as the sacrificing core or pore generator. The results showed that the PMMA could be removed successfully at a carbonization temperature of 900 °C, forming the hollow or porous ACNFs. The diameters of the ACNFs ranged from 500 to 900 nm, and the shell thickness of the hollow ACNFs was approximately 70–110 nm. The solid ACNFs and hollow ACNFs were microporous materials, while the porous ACNFs were characterized by hierarchical pore structures. The hollow ACNFs and porous ACNFs possessed higher specific surface areas than that of the solid ACNFs, while the solid ACNFs exhibited the highest microporosity (94%). The CO2 adsorption capacity on the ACNFs was highly dependent on the ratio of V<0.7 nm to Vt, the ratio of Vmi to Vt, and the N-containing functional groups. The CO2 adsorption breakthrough curves could be curve-fitted well with the Yoon and Nelson model. Furthermore, the 10 cyclic tests demonstrated that the ACNFs are promising adsorbents.

Developing Eco-Friendly and Cost-Effective Porous Adsorbent for Carbon Dioxide Capture

To address the issue of global warming and climate change issues, recent research efforts have highlighted opportunities for capturing and electrochemically converting carbon dioxide (CO₂). Despite metal doped polymers receiving widespread attention in this respect, the structures hitherto reported lack in ease of synthesis with scale up feasibility. In this study, a series of mesoporous metal-doped polymers (MRFs) with tunable metal functionality and hierarchical porosity were successfully synthesized using a one-step copolymerization of resorcinol and formaldehyde with Polyethyleneimine (PEI) under solvothermal conditions. The effect of PEI and metal doping concentrations were observed on physical properties and adsorption results. The results confirmed the role of PEI on the mesoporosity of the polymer networks and high surface area in addition to enhanced CO₂ capture capacity. The resulting Cobalt doped material shows excellent thermal stability and promising CO₂ capture performance, with equilibrium adsorption of 2.3 mmol CO₂/g at 0 °C and 1 bar for at a surface area 675.62 m²/g. This mesoporous polymer, with its ease of synthesis is a promising candidate for promising for CO₂ capture and possible subsequent electrochemical conversion.

Electrospun Composites Made of Reduced Graphene Oxide and Polyacrylonitrile-Based Activated Carbon Nanofibers (rGO/ACNF) for Enhanced CO2 Adsorption

In this work, we report the preparation of polyacrylonitrile (PAN)-based activated carbon nanofibers composited with different concentrations of reduced graphene oxide (rGO/ACNF) (1%, 5%, and 10% relative to PAN weight) by a simple electrospinning method. The electrospun nanofibers (NFs) were carbonized and physically activated to obtain activated carbon nanofibers (ACNFs). Texture, surface and elemental properties of the pristine ACNFs and composites were characterized using various techniques. In comparison to pristine ACNF, the incorporation of rGO led to changes in surface and textural characteristics such as specific surface area (S_BET), total pore volume (V_total), and micropore volume (V_micro) of 373 m²/g, 0.22 cm³/g, and 0.15 cm³/g, respectively, which is much higher than the pristine ACNFs (e.g., S_BET = 139 m²/g). The structural and morphological properties of the pristine ACNFs and their composites were studied by Raman spectroscopy and X-ray diffraction (XRD), and field emission scanning electron microscopy (FE-SEM) respectively. Carbon dioxide (CO₂) adsorption on the pristine ACNFs and rGO/ACNF composites was evaluated at different pressures (5, 10, and 15 bars) based on static volumetric adsorption. At 15 bar, the composite with 10% of rGO (rGO/ACNF0.1) that had the highest S_BET, V_total, and V_micro, as confirmed with BET model, exhibited the highest CO₂ uptake of 58 mmol/g. These results point out that both surface and texture have a strong influence on the performance of CO₂ adsorption. Interestingly, at p < 10 bar, the adsorption process of CO₂ was found to be quite well fitted by pseudo-second order model (i.e., the chemisorption), whilst at 15 bar, physisorption prevailed, which was explained by the pseudo-first order model.

Gasification biochar from biowaste (food waste and wood waste) for effective CO2 adsorption

Biochar is newly proposed as an innovative and cost-effective material to capture CO₂. In this study, biochar was produced from feedstock mixtures of food waste and wood waste (i.e., 20%:80% WFW20, 30%:70% WFW30 and 40%:60% WFW40) by gasification. The two biochar adsorbents containing the highest percentage of food waste, i.e., WFW40-K and WFW40-KC, were activated by KOH and KOH + CO₂, respectively. The biochar adsorbents were then tested for CO₂ adsorption at room temperature of 25 °C by using a volumetric sorption analyzer. The WFW20 showed the highest CO₂ adsorption capacity, while higher percentage of food waste in the feedstock was unfavorable for the CO₂ adsorption. The presence of N and S on the biochar surface was the primary contributor to the high CO₂ uptake on WFW20. The development of micropores by KOH activation significantly increased the CO₂ adsorption on WFW40-K, but KOH + CO₂ activation could not further increase the development of micropores and subsequent CO₂ adsorption. Moreover, WFW40-K showed >99% recyclability during 10 consecutive adsorption-desorption cycles. The biochars derived from biowaste (food waste and wood waste) could be effective adsorbents for CO₂ capture by providing green solution for food waste recycling.

Synthesis and Characterization of Nitrogen-doped Carbon Nanotubes Derived from g-C3N4

Here, nitrogen-doped carbon nanotubes (CNT-N) were synthesized using exfoliated graphitic carbon nitride functionalized with nickel oxides (ex-g-C₃N₄-NixO_y). CNT-N were produced at 900 °C in two steps: (1) ex-g-C₃N₄-Ni_xO_y reduction with hydrogen and (2) ethylene assisted chemical vapor deposition (CVD). The detailed characterization of the produced materials was performed via atomic force microscopy (AFM), transmission electron microscopy (TEM), Raman spectroscopy, X-ray diffraction (XRD) and thermogravimetric analysis (TGA). The possible mechanism of nanotubes formation is also proposed.

Trends in Solid Adsorbent Materials Development for CO2 Capture

A recent report from the United Nations has warned about the excessive CO₂ emissions and the necessity of making efforts to keep the increase in global temperature below 2 °C. Current CO₂ capture technologies are inadequate for reaching that goal, and effective mitigation strategies must be pursued. In this work, we summarize trends in materials development for CO₂ adsorption with focus on recent studies. We put adsorbent materials into four main groups: (I) carbon-based materials, (II) silica/alumina/zeolites, (III) porous crystalline solids, and (IV) metal oxides. Trends in computational investigations along with experimental findings are covered to find promising candidates in light of practical challenges imposed by process economics.

Enhanced CO2 Adsorption on Nitrogen-Doped Carbon Materials by Salt and Base Co-Activation Method

Nitrogen-doped carbon materials with enhanced CO₂ adsorption were prepared by the salt and base co-activation method. First, resorcinol-formaldehyde resin was synthesized with a certain salt as an additive and used as a precursor. Next, the resulting precursor was mixed with KOH and subsequently carbonized under ammonia flow to finally obtain the nitrogen-doped carbon materials. A series of samples, with and without the addition of different salts, were prepared, characterized by XRD (X-ray powder diffraction), elemental analysis, BET (N₂-adsorption-desorption analysis), XPS (X-ray photoelectron spectroscopy) and SEM (Scanning electron microscopy) and tested for CO₂ adsorption. The results showed that the salt and base co-activation method has a remarkable enhancing effect on the CO₂ capture capacity. The combination of KCl and KOH was proved to be the best combination, and 167.15 mg CO₂ could be adsorbed with 1 g nitrogen-doped carbon at 30 °C under 1 atm pressure. The materials characterizations revealed that the introduction of the base and salt could greatly increase the content of doped nitrogen, the surface area and the amount of formed micropore, which led to enhanced CO₂ absorption of the carbon materials.