Characterization and Applications of Kaolinite Robustly Grafted by an Ionic Liquid with Naphthyl Functionality

Sustainable green conversion of coal gangue waste into cost-effective porous multimetallic silicate adsorbent enables superefficient removal of Cd(II) and dye

Converting solid wastes into new materials for wastewater decontamination is a feasible "one stone, three birds" strategy to achieve sustainable value-added utilization of resources and minimize waste emissions, but significant challenges remain. In response to this, we proposed an efficient "mineral gene reconstruction" method to synchronously transform coal gangue (CG) into a green porous silicate adsorbent without using any harmful chemicals (i.e., surfactants, organic solvents). The one of the synthesized adsorbents with a high specific surface area (582.28 m²/g) and multimetallic active centres shows outstanding adsorption performance (adsorption capacities: 168.92 mg/g for Cd(II), 234.19 mg/g for methylene blue (MB); removal rate: 99.04% for Cd(II) and 99.9% for MB). The adsorbent can also reach a high removal rate of 99.05%∼99.46% and 89.23%∼99.32% for MB and Cd(II) in real water samples (i.e., Yangtze River, Yellow River, seawater and tap water), respectively. After 5 adsorption-desorption cycles, the adsorption efficiency remained above 90%. The adsorbents mainly adsorbed Cd(II) by electrostatic attraction, surface complexation and partial ion exchange and MB by electrostatic and hydrogen bonding interactions. This study provides a sustainable and promising platform for developing a new-generation cost-efficient adsorbent from waste for clean water production.

Regioselective Approach to Characterizing Increased Edge Availability in Layered Crystal Materials following Layer Expansion: Reaction of Kaolinite with Octadecyltrimethylammonium Salts

In this paper, the regioselective reactions of kaolinite and methoxy-modified kaolinite (MeO-Kaol), methanol-expanded kaolinite, with octadecyltrimethylammonium salts are compared. This study mainly concerns the reactions of kaolinite or MeO-Kaol with octadecyltrimethylammonium chloride (C18TAC) in methanol and the subsequent exhaustive washing of the resultant products with ethanol. X-ray diffraction patterns of the products reveal no intercalation of C18TAC between pristine kaolinite layers. Additionally, intercalation and subsequent deintercalation of C18TAC proceed in the product using MeO-Kaol. In the Fourier-transform infrared spectra, the intensities of CH2 stretching bands of the product prepared using MeO-Kaol drastically increase compared to those using kaolinite. In addition, CH2 stretching bands of the product using kaolinite are hardly observed without enlarging the spectrum. The product using MeO-Kaol also displays mass loss in the range of 200-300 °C in the thermogravimetric curve and a nitrogen content with 0.15 mass% estimated using the CHN analysis. These results therefore demonstrate an increase in the available reactive edges in the layered crystal material following an expansion of the stacked layers.

Structural and Thermal Properties of Montmorillonite/Ionic Liquid Composites

Composites of montmorillonite K10 (MMT K10) and ionic liquid (IL) containing a 1-butyl-3-methyl-imidazolium cation ([BMIm]⁺) and various anions, such as bis (trifluoromethylsulfonyl) imide ([NTf₂]⁻), trifluoromethanesulfonate ([OTf]⁻), and dicyanamide ([DCA]⁻) have been obtained in this work. A number of methods, such as dynamic light scattering (DLS), scanning electron microscopy (SEM), X-ray diffraction (XRD), thermal gravimetry (TG), differential scanning calorimetry (DSC), Fourier-transform infrared (FTIR) spectroscopy, and nitrogen adsorption–desorption have been used to characterize clay, and to study the structure and thermal behaviour of the composites. It has been found that the MMT K10 powder has a narrow particle size distribution with a peak at 246 nm and a mesoporous structure (S_BET=195 m²/g). According to the FTIR spectra, MMT K10/IL interaction depends on the IL type. It has been identified that confined ionic liquid interacts with both clay and adsorbed water in accordance with the hydrophilicity and size of the anion, in the following order: [DCA]⁻ > [OTf]⁻ > [NTf₂]⁻. Characteristic temperatures of glass transition, crystallization, and melting have been determined for the ionic liquids under study and their MMT K10 composites. It has been revealed that when IL is adsorbed on the surface of clay, the phase transitions in IL change. The greatest changes are observed in the case of BMImNTf₂. By applying the method of thermogravimetric analysis, it is shown that composite formation is accompanied by a decrease in the IL thermal stability. Apparently, the highly developed surface of montmorillonite K10, obtained by acid treatment, plays a major role in the decrease in the IL’s thermal stability. The influence of the IL anion on the thermal and spectral characteristics of an MMT K10/IL composite was studied for the first time.