Light Trapping with Silicon Light Funnel Arrays

Simulation of optical absorption in conical nanowires

The optical absorptance from arrays of GaAs nanowires (NWs) was examined by the finite element method. Absorptance in cylindrical NWs, frustum nanocones (with base wider than the top) and inverted frustum nanocones (with top wider than the base) was compared. The introduction of higher order HE_1n modes, the red-shift of the HE_1n modes along the NW length due to NW tapering, and the red-shift of the modes due to increase of the overall NW diameter all contribute to a broadening of the absorption spectrum in conical NWs as compared to NWs with a constant diameter. The optical reflectance versus NW top diameter shows a minimum due to a balance between reflectance from the top of the NWs and reflectance from the substrate between NWs. The optimum geometry for photovoltaic energy conversion was determined from the total photocurrent. An optimum photocurrent of 26.5 mAcm^-2 was obtained, corresponding to a conical NW morphology with base diameter of 200 nm, top diameter of 110 nm, and length of 2000 nm. An optimized inverse tapered conical morphology gave comparable performance.

Broadband solar absorption with silicon metamaterials driven by strong proximity effects

Absorption of the solar radiation over a wide spectral range is of utmost importance to applications related to the harvesting of solar energy. We numerically demonstrate broadband solar absorption enhancement employing a metamaterial in the form of arrays composed of subwavelength silicon truncated inverted cones, henceforth referred to as light funnel (LF) arrays. We show that the broadband absorption efficiency of an unoptimized LF array is 36% greater compared with an optically-maximized NP array. We show that photon trapping in LF arrays is motivated by proximity effects related to the optical overlap between LFs. We make the distinction between two types of optical overlap: weak overlap in which the coupling between the sparse array modes and the impinging illumination increases with array densification, and strong overlap where the array densification introduces new highly absorbing modes. We show that in nanopillar (NP) arrays the optical intensity inside the NPs decreases upon densification and the overall increase in absorptivity is due to increase in filling ratio (as was also shown by others), while the densification of LF arrays increases the optical intensity inside the individual LF and with the concurrent increase in filling ratio concludes light trapping much superior to that of NP arrays. Light trapping governed by strong proximity effects was not reported to date, and we believe it is an important paradigm for miniaturized lab-on-chip technologies.

Geometry-driven carrier extraction enhancement in photovoltaic cells based on arrays of subwavelength light funnels

Texturing the front surface of thin film photovoltaic cells with ordered or disordered arrangements of subwavelength structures is beneficial in terms of efficient light harvesting as well as efficient carrier extraction. Previous studies demonstrated efficient broadband absorption of solar radiation with surface arrays of subwavelength inverted cones (light funnels - LFs). In the current work, we use three-dimensional finite-difference time-domain electromagnetic calculations as well as three-dimensional device calculations to examine carrier extraction from photovoltaic cells that are composed of LF arrays on top of underlying substrates. For the selected geometry under examination, we show a broadband absorption enhancement of 14% for the LF photovoltaic cell compared with a cell based on the respective optically optimized nanopillar arrays. However, we show that the nominal power conversion efficiency is 60% higher in the LF cell which is due to the enhancement of both open-circuit voltage and short-circuit current. The higher open-circuit voltage in the LF cell is due to the higher injection of photocarriers, and the higher short-circuit current is a result of the unique LF geometry that supports efficient carrier extraction due to the naturally occurring gradients of the quasi-Fermi levels and minority carrier conductivity that allow for enhanced contact selectivity. We believe that this work paves the way towards a new approach for carrier collection in photonic devices for energy applications.

Compound nanostructure capable of realizing full-spectrum utilization of solar energy for PV-TE hybrid systems

The photovoltaic-thermoelectric (PV-TE) hybrid system can achieve full-spectrum utilization of the solar spectrum, but surface reflection has always been an important reason to suppress its power conversion efficiency. Therefore, a novel composite nanostructure (CN) is proposed by the finite-difference time-domain (FDTD) simulation method to reduce the surface reflection in the spectral range of 0.3-2.5 μm, which consists of a pyramid and grating structure. For the sake of generality, this paper studies the spectral reflectance of the CN under multiple parameters. The results show that the CN integrated pyramid and grating correspond to excellent anti-reflection performance in the short wavelength range and long wavelength range, respectively, compared to a unitary structure, achieving anti-reflection in the full spectral range. In addition, the CN expresses the insensitivity to the structural parameters, and has lower reflectivity compared with a commercial battery. The mechanism for achieving this full-spectrum anti-reflection is mainly to enhance the path of light in the medium to enhance absorption and achieve high transmission under the action of the waveguide. This paper implements ultra-broadband anti-reflection of a compound nanostructure for full-spectrum utilization of solar energy, and provides a solution to improve the power conversion efficiency of PV-TE hybrid systems.

Approaching the Yablonovitch limit with free-floating arrays of subwavelength trumpet non-imaging light concentrators driven by extraordinary low transmission

Metamaterials based on arrays of subwavelength dielectric structures have recently proved to be a viable research tool towards the realization of various photonic devices. In the current study we introduce a new approach towards efficient light trapping and broadband absorption of solar radiation based on silicon surface arrays composed of subwavelength trumpet non-imaging light concentrators (henceforth, trumpet arrays). In geometrical optics, a three-dimensional trumpet non-imaging light concentrator is a hyperboloid of revolution with an ideal light concentration ratio. We use finite-difference time-domain electromagnetic calculations to examine the optical response of an infinite cubic-tiled substrate-less silicon trumpet array under normal illumination. The absorptivity spectra of trumpet arrays are characterized by strong absorption peaks, some of which are just below the Yablonovitch limit. The enhanced light trapping is attributed solely to the efficient occupation of the array Mie modes, and we show absorption enhancement at near infrared that is an order of magnitude higher than that of the optimized nanopillar (NP) arrays. We show superior broadband absorption of solar radiation in trumpet arrays (with unoptimized geometry) compared with that of the optimized NP arrays (∼26% enhancement). The higher optical absorption in the trumpet array is governed by low transmissivity, in contrast to the NP array in which the absorption is governed by low reflectivity. Finally, we show that low reflectivity in trumpet arrays is governed by modal excitation at the upper part of the trumpets (which is also supported by the weak dependency of the reflectivity on the array height), whereas the transmissivity is governed by modal excitation at the lower part of the trumpets.