Chitosan/Poly(vinylpyrrolidone) Matrices Obtained by Gamma-Irradiation for Skin Scaffolds: Characterization and Preliminary Cell Response Studies

Pharmaceutical applications of chitosan in skin regeneration: A review

Skin regeneration is the process that restores damaged tissues. When the body experiences trauma or surgical incisions, the skin and tissues on the wound surface become damaged. The body repairs this damage through complex physiological processes to restore the original structural and functional states of the affected tissues. Chitosan, a degradable natural bioactive polysaccharide, has attracted widespread attention partly owing to its excellent biocompatibility and antimicrobial properties; additionally, a modified form of this compound has been shown to promote skin regeneration. This review evaluates the recent research progress in the application of chitosan to promote skin regeneration. First, we discuss the basic principles of the extraction and preparation processes of chitosan from its source. Subsequently, we describe the functional properties of chitosan and the optimization of these properties through modification. We then focus on the existing chitosan-based biomaterials developed for clinical applications and their corresponding effects on skin regeneration, particularly in cases of diabetic and burn wounds. Finally, we explore the challenges and prospects associated with the use of chitosan in skin regeneration. Overall, this review provides a reference for related research and contributes to the further development of chitosan-based products in cutaneous skin regeneration.

Binary Graft of Poly(acrylic acid) and Poly(vinyl pyrrolidone) onto PDMS Films for Load and Release of Ciprofloxacin

Polymers are versatile compounds which physical and chemical properties can be taken advantage of in wide applications. Particularly, in the biomedical field, polydimethylsiloxane (PDMS) is one of the most used for its high biocompatibility, easy manipulation, thermal, and chemical stability. Nonetheless, its hydrophobic nature makes it susceptible to bacterial pollution, which represents a disadvantage in this field. A potential solution to this is through the graft of stimuli-sensitive polymers that, besides providing hydrophilicity, allow the creation of a drug delivery system. In this research, PDMS was grafted with acrylic acid (AAc) and vinyl pyrrolidone (VP) in two steps using gamma radiation. The resulting material was analyzed by several characterization techniques such as infrared spectroscopy (FTIR), swelling, contact angle, critical pH, and thermogravimetric analysis (TGA), demonstrating the presence of both polymers onto PDMS films and showing hydrophilic and pH-response properties. Among the performed methods to graft, the loading and release of ciprofloxacin were successful in those samples obtained by direct irradiation method. Furthermore, the antimicrobial assays showed zones of inhibition for microorganisms such as Staphylococcus aureus and Escherichia coli.

Chitosan-Based Membranes for Skin Wound Repair in a Dorsal Fold Chamber Rat Model

Frequently, deep partial and full-thickness skin wounds do not spontaneously regenerate. To restore the normal function of skin, epidermal and dermal components have to be supplied to the wound bed by grafting various substrates. Available options are limited and frequently costly. Herein, authors present a possible approach using 3D skin scaffolds capable of mimicking structure and biological functions of the extracellular matrix, providing, in parallel, a good environment for cell attachment, proliferation and differentiation. Low-molecular weight chitosan-based membranes were prepared by freeze-drying and ionizing radiation techniques to be used as skin scaffolds. Poly (vinyl alcohol), PVA, vinyl pyrrolidone, VP, and gelatin from cold water fish were incorporated. Information regarding membranes' physical-chemical properties from SEM analysis, swelling and weight loss, together with biological response through in vitro assays (using Human Caucasian Fetal Foreskin Fibroblast) allowed the selection of an optimized batch of membranes that was used as skin scaffold in a dorsal rat model wound. The in vivo implantation assays (in Wistar rats) resulted in very promising results: (i) healing process faster than control; (ii) good vascularization; (iii) viable new tissues morphologically functional.

Bibliometrics of Functional Polymeric Biomaterials with Bioactive Properties Prepared by Radiation-Induced Graft Copolymerisation: A Review

Functional polymeric biomaterials (FPBMs) with bioactive characteristics obtained by radiation-induced graft copolymerisation (RIGC) have been subjected to intensive research and developed into many commercial products. Various studies have reported the development of a variety of radiation-grafted FPBMs. However, no reports dealing with the quantitative evaluations of these studies from a global bibliographic perspective have been published. Such bibliographic analysis can provide information to overcome the limitations of the databases and identify the main research trends, together with challenges and future directions. This review aims to provide an unprecedented bibliometric analysis of the published literature on the use of RIGC for the preparation of FPBMs and their applications in medical, biomedical, biotechnological, and health care fields. A total of 235 publications obtained from the Web of Science (WoS) in the period of 1985-2021 were retrieved, screened, and evaluated. The records were used to manifest the contributions to each field and underline not only the top authors, journals, citations, years of publication, and countries but also to highlight the core research topics and the hubs for research excellence on these materials. The obtained data overviews are likely to provide guides to early-career scientists and their research institutions and promote the development of new, timely needed radiation-grafted FPBMs, in addition to extending their applications.

Fabrication and evaluation of Cs/PVP sponge containing platelet-rich fibrin as a wound healing accelerator: An in vitro and in vivo study

Despite significant advances in surgery and postoperative care, there are still challenges in the treatment of wounds. In the current study, a freeze-dried chitosan (Cs)/polyvinylpyrrolidone (PVP) sponges containing platelet-rich fibrin (PRF at 1, 1.5 and 2% w/v) for wound dressing application is fabricated and fully characterized. Addition of 1% w/v of PRF to Cs/PVP (CS/PVP/1PRF) sample significantly increased the tensile strength (from 0.147 ± 0.005 to 0.242 ± 0.001 MPa), elastic modulus (from 0.414 ± 0.014 to 0.611 ± 0.022 MPa) and strain at break (from 53.4 ± 0.9 to 61.83 ± 1.17%) compared to Cs sample, and was hence selected as the optimal sample. The antibacterial activity of Cs/PVP/1PRF sponge wound dressing against E. coli and S. aureus was confirmed to be effective. Enzyme-linked immunosorbent assays revealed that the release of both VEGF and PDGF-AB from PRF powder, as well as PDGF-AB from Cs/PVP/1PRF sample was time-independent, but the release of VEGF from Cs/PVP/1PRF sample increased significantly with time. According to MTT and CAM assays, the Cs/PVP/1PRF sample significantly increased proliferation and angiogenic potential, respectively. Furthermore, in vivo studies demonstrated a 97.16 ± 1.55% wound closure for Cs/PVP/1PRF group after 14 days.

Chitosan/PVA Based Membranes Processed by Gamma Radiation as Scaffolding Materials for Skin Regeneration

Some of the current strategies for the development of scaffolding materials capable of inducing tissue regeneration have been based on the use of polymeric biomaterials. Chitosan, in particular, due to its recognized biological activity has been used in a number of biomedical applications. Aiming the development of chitosan-based membranes with improved cell adhesion and growth properties to be used as skin scaffolds allowing functional tissue replacement, different formulations with chitosan of different molecular weight, poly (vinyl alcohol) and gelatin, were evaluated. To meet the goal of getting ready-to-use scaffolds assuring membranes’ required properties and sterilization, preparation methodology included a lyophilization procedure followed by a final gamma irradiation step. Two radiation dose values were tested. Samples were characterized by TGA, FTIR, and SEM techniques. Their hydrophilic properties, in vitro stability, and biocompatibility were also evaluated. Results show that all membranes present a sponge-type inner structure. Chitosan of low molecular weight and the introduction of gelatin are more favorable to cellular growth leading to an improvement on cells’ morphology and cytoskeletal organization, giving a good perspective to the use of these membranes as potential skin scaffolds.

Synthesis and characterization of hydrogels based on carboxymethyl chitosan and poly(vinylpyrrolidone) blends prepared by electron beam irradiation having anticancer efficacy, and applications as drug carrier for controlled release of drug

Herein, carboxymethyl chitosan and poly(vinylpyrrolidone) based hydrogels were synthesized by electron beam irradiation with dose variations (15 kGy, 30 kGy, and 45 kGy) for drug delivery applications. Irradiation crosslinked hydrogels were characterized for swellings in different medias, chemical, thermal, cell cytotoxicity, and drug release aspects. Swelling analysis was evaluated in distilled water, buffer, and saline solutions. Fourier transform infrared analysis revealed the establishment of physical interactions and confirmed the presence of functional groups present in the drug carriers. Scanning electron microscopy depicted the porous structure, which is responsible for swelling, drug loading, and release. Cell cytotoxicity assays indicated good cell viability on RAW 264.7 cells and anticancer activity on cancerous AGS cell lines. Cumulative drug release (%) of kanamycin in PBS at pH 7.4 was more than 90 % at 168 h. These drug carriers show promise to be developed as a sustained drug delivery system.

Antibacterial Behavior of Chitosan-Sodium Hyaluronate-PEGDE Crosslinked Films

Chitosan is a natural polymer that can sustain not only osteoblast adhesion and proliferation for bone regeneration purposes, but it is also claimed to exhibit antibacterial properties towards several Gram-positive and Gram-negative bacteria. In this study, chitosan was modified with sodium hyaluronate, crosslinked with polyethylene glycol diglycidyl ether (PEGDE) and both osteoblast cytotoxicity and antibacterial behavior studied. The presence of sodium hyaluronate and PEGDE on chitosan was detected by FTIR, XRD, and XPS. Chitosan (CHT) films with sodium hyaluronate crosslinked with PEGDE showed a better thermal stability than pristine hyaluronate. In addition, osteoblast cytocompatibility improved in films containing sodium hyaluronate. However, none of the films exhibit antimicrobial activity against Escherichia coli, Enterococcus faecalis, and Staphylococcus aureus while exhibiting low to mild activity against Salmonella typhimurion.

An upgraded and universal strategy to reinforce chitosan/polyvinylpyrrolidone film by incorporating active silica nanorods derived from natural palygorskite

Active silica nanorod (OPal) was prepared from natural palygorskite (RPal) using an updated acid leaching route, and then the effect of RPal and OPal as nano-filler on the network structure, mechanical, thermal and anti-aging properties of chitosan/polyvinylpyrrolidone (CS/PVP) films was studied comparatively. It was revealed that OPal had a better dispersibility than RPal in CS/PVP substrate, and its incorporation improved the mechanical properties and thermal stability of the films significantly. The optimal composite film containing OPal shows the maximum tensile strength of 27.53 MPa (only 14.87 MPa and 22.47 MPa for CS/PVP and CS/PVP/RPal films, respectively), resulting from the more uniform dispersion of OPal in polymer substrate and its stronger interaction with 3D polymer network. By a controllable acid-leaching process, the metal ions in octahedral sheets of RPal were dissolved out continuously, which is favorable to alleviate the adverse effects of variable metal ions on the film under UV light irradiation, and thus improve the aging-resistant ability of films. This study provides new ideas for improving the reinforcing ability of natural clay minerals towards biopolymer-based material, finds a new way to resolve the aging problem of polymer composites caused by incorporation of natural clay minerals.

Three-Dimensional Printing Constructs Based on the Chitosan for Tissue Regeneration: State of the Art, Developing Directions and Prospect Trends

Chitosan (CS) has gained particular attention in biomedical applications due to its biocompatibility, antibacterial feature, and biodegradability. Hence, many studies have focused on the manufacturing of CS films, scaffolds, particulate, and inks via different production methods. Nowadays, with the possibility of the precise adjustment of porosity size and shape, fiber size, suitable interconnectivity of pores, and creation of patient-specific constructs, 3D printing has overcome the limitations of many traditional manufacturing methods. Therefore, the fabrication of 3D printed CS scaffolds can lead to promising advances in tissue engineering and regenerative medicine. A review of additive manufacturing types, CS-based printed constructs, their usages as biomaterials, advantages, and drawbacks can open doors to optimize CS-based constructions for biomedical applications. The latest technological issues and upcoming capabilities of 3D printing with CS-based biopolymers for different applications are also discussed. This review article will act as a roadmap aiming to investigate chitosan as a new feedstock concerning various 3D printing approaches which may be employed in biomedical fields. In fact, the combination of 3D printing and CS-based biopolymers is extremely appealing particularly with regard to certain clinical purposes. Complications of 3D printing coupled with the challenges associated with materials should be recognized to help make this method feasible for wider clinical requirements. This strategy is currently gaining substantial attention in terms of several industrial biomedical products. In this review, the key 3D printing approaches along with revealing historical background are initially presented, and ultimately, the applications of different 3D printing techniques for fabricating chitosan constructs will be discussed. The recognition of essential complications and technical problems related to numerous 3D printing techniques and CS-based biopolymer choices according to clinical requirements is crucial. A comprehensive investigation will be required to encounter those challenges and to completely understand the possibilities of 3D printing in the foreseeable future.

Ionizing Radiation for Preparation and Functionalization of Membranes and Their Biomedical and Environmental Applications

The use of ionizing radiation processing technologies has proven to be one of the most versatile ways to prepare a wide range of membranes with specific tailored functionalities, thus enabling them to be used in a variety of industrial, environmental, and biological applications. The general principle of this clean and environmental friendly technique is the use of various types of commercially available high-energy radiation sources, like ⁶⁰Co, X-ray, and electron beam to initiate energy-controlled processes of free-radical polymerization or copolymerization, leading to the production of functionalized, flexible, structured membranes or to the incorporation of functional groups within a matrix composed by a low-cost polymer film. The present manuscript describes the state of the art of using ionizing radiation for the preparation and functionalization of polymer-based membranes for biomedical and environmental applications.