Optimization of MBE Growth Conditions of In0.52Al0.48As Waveguide Layers for InGaAs/InAlAs/InP Quantum Cascade Lasers

Monolithic, Optically Coupled, Multi-Section Mid-IR Quantum Cascade Lasers

Mid-infrared (mid-IR λ ≈ 3–12 μm), single-mode-emission Quantum Cascade Lasers (QCLs) are of significant interest for a wide range of applications, especially as the laser sources are chosen for laser absorption spectroscopy. In this work, we present the design, fabrication and characterization of multi-section, coupled-cavity, mid-IR quantum cascade lasers. The purpose of this work is to propose a design modification for a coupled-cavity device, yielding a single-mode emission with a longer range of continuous tuning during the pulse, in contrast to a 2-section device. This effect was obtained and demonstrated in the work. The proposed design of a 3-section coupled-cavity QCL allows for a single-mode emission with 35 dB side-mode suppression ratio. Additionally, the time-resolved spectra of the wavelength shift during pulse operation, show a continuous tuning of ~3 cm−1 during the 2 μs pulse. The devices were fabricated in a slightly modified, standard laser process using dry etching.

Analysis of Current Transport Mechanism in AP-MOVPE Grown GaAsN p-i-n Solar Cell

Basic knowledge about the factors and mechanisms affecting the performance of solar cells and their identification is essential when thinking of future improvements to the device. Within this paper, we investigated the current transport mechanism in GaAsN p-i-n solar cells grown with atmospheric pressure metal organic vapour phase epitaxy (AP-MOVPE). We examined the electro-optical and structural properties of a GaAsN solar cell epitaxial structure and correlated the results with temperature-dependent current-voltage measurements and deep level transient spectroscopy findings. The analysis of J-V-T measurements carried out in a wide temperature range allows for the determination of the dominant current transport mechanism in a GaAsN-based solar cell device and assign it a nitrogen interstitial defect, the presence of which was confirmed by DLTFS investigation.

Ammonia Gas Sensors: Comparison of Solid-State and Optical Methods

High precision and fast measurement of gas concentrations is important for both understanding and monitoring various phenomena, from industrial and environmental to medical and scientific applications. This article deals with the recent progress in ammonia detection using in-situ solid-state and optical methods. Due to the continuous progress in material engineering and optoelectronic technologies, these methods are among the most perceptive because of their advantages in a specific application. We present the basics of each technique, their performance limits, and the possibility of further development. The practical implementations of representative examples are described in detail. Finally, we present a performance comparison of selected practical application, accumulating data reported over the preceding decade, and conclude from this comparison.

Special Issue "Advances in Epitaxial Materials"-Editorial Preface

In this Special Issue, we have 10 excellent papers on epitaxy. In this editorial preface, I will make comments on the following issues: (1) applications of the materials examined, (2) lattice mismatch, (3) epitaxial growth methods used, (4) characterization methods used, (5) material problems: solved and still to be solved. The “Advances in Epitaxial Materials” has a big advantage of having, in one issue, papers on different materials, but in every paper the reader should find interesting information on epitaxial growth and characterization.