VOC Emissions from Spruce Strands and Hemp Shive: In Search for a Low Emission Raw Material for Bio-Based Construction Materials

Insight on the deterioration of cultural objects: a multi-analytical approach to characterize degradation products of lead weights from a Steinway & sons piano

The identification of the degradation products in objects of cultural significance, including musical instruments (e.g., a piano), is a key issue for the preservation and valorisation processes of cultural heritage. The aim of this study is to characterize the degradation products of lead weights from an important Steinway & sons piano using a multi-analytical approach that includes ionic chromatography (IC), X-ray diffraction (XRD) and Fourier transform-infrared (FTIR) spectroscopy analyses. These techniques allowed us to identify hydrocerussite as the main degradation product on the superficial layer of lead weights, followed by lead acetate and formate. Moreover, accelerated corrosion experiments in closed environments were performed under acetic and formic acid atmospheres to evaluate the development of lead acetate and formate over time. Exposure of lead weights to formic and acetic acid vapours leads to the prevalent formation of basic lead formate, which promotes the formation of hydrocerussite. These results can help to limit the degradation of these piano components and consequently preserve the sound of the piano itself.

Development of High Strength Particleboards from Hemp Shives and Corn Starch

In the current study, high-strength boards for the construction industry were developed from renewable natural resources, fibrous hemp shives, and corn starch. During the research, the influence of the composition of the mixture, the processing of raw materials, and technological parameters on the operational properties of the board were evaluated. The influence of the binding material and the water content on the properties of the molded boards was evaluated. It was established that the rational amount of starch is 15% of the mass of the shives, and the amount of water is 10%. It has been established that with the proper selection of the forming parameters of the board, it is possible to avoid internal disintegration of the structure due to the water vapor pressure, increase the bending strength, and ensure uniform sintering of the board throughout the entire volume. It was found that additional processing of hemp shives can increase bending strength by more than 40%. Furthermore, during the processing of shives by chemical means, soluble substances are washed out, which reduces the density and thermal conductivity of the shives. Selection of a rational level of compression allowed us to increase the bending strength of the boards by 40%. The assessment of all factors made it possible to obtain boards with a bending strength of 40 MPa. The additives used made it possible to reduce the water absorption of the boards up to 16 times and obtain non-flammable boards. The thermal conductivity of the resulting boards varied from 0.07 to 0.095 W/(m·K). The analysis of macrostructure and microstructure allowed us to evaluate the process of the formation of bonds between hemp shives.

Evaluation of VOCs from fungal strains, building insulation materials and indoor air by solid phase microextraction arrow, thermal desorption-gas chromatography-mass spectrometry and machine learning approaches

Solid phase microextraction Arrow and thermal desorption-gas chromatography-mass spectrometry allowed the collection and evaluation of volatile organic compounds (VOCs) emitted by fungal cultures from building insulation materials and in indoor air. Principal component analysis, linear discriminant analysis and supported vector machine were used for visualization and statistical assessment of differences between samples. In addition, a screening tool based on the soft independent modelling of class analogies (SIMCA) was developed for identification of fungal contamination of indoor air. Ten different fungal strains, incubated under ambient and microaerophilic conditions, were analyzed for time period ranging from 5 to 29 days after inoculation resulting in a total of 140 samples. In addition, the effect of additives on the fungal growing media was studied. The total number of compounds and concentration values were used for the evaluation of the results. Clear differences were observed for VOC profiles emitted by different fungal strains by exploiting long chain alcohols (3-octanol, 1-hexanol and 2-octen-1-ol) and sesquiterpenes (farnesene, cuprene). The analysis of glass-wool and cellulose based building insulation materials (3 samples) gave clear differences, mainly for oxygenated compounds (ethyl acetate and hexanal) and benzenoids (benzaldehyde). Moreover, the comparison of indoor air and insulation materials collected from a house with fungal indoor air problems indicated that 42% of the VOCs were found in both samples. The analysis of 52 indoor air samples demonstrated clear differences in their VOC profiles, especially for hydrocarbons, and between control (44 samples) and indoor air problem houses (8 samples). Finally, the SIMCA model enabled to recognize differences between control and fungi contaminated houses with a prediction capacity over 84%.

Qualitative Differences and Emission Persistence of Volatile Organic Compounds from Bio-Based Particleboards

An attempt to reduce, replace, or even eliminate the synthetic resins from wood-based panels alongside broadening the array of raw lignocellulosics is still essential and attractive. Many pretreatments of lignocellulosics have been studied, among which steam explosion (SE) resulted in superior physical-mechanical properties of the obtained binder-less boards. However, the SE pretreatment leads to a relatively strong odor, which is even emitted from the obtained binder-less boards independent of the raw lignocellulosic, raising concern about the use of the boards. Emissions of volatile organic compounds (VOCs) were investigated in the framework of the study from binder-less boards obtained from different SE raw lignocellulosics and SE-untreated suberinic acids-bonded particleboard. VOCs were collected by headspace solid-phase microextraction (HS-SPME) and analyzed by gas chromatography–mass spectrometry (GC–MS) for 28 days with an interval of 2 weeks. The results showed that the number of detected VOCs and their chromatographic peak area varied significantly depending on the raw lignocellulosic, board density, and post-treatment (overlayering), decreasing over time. The lowest area of detected VOCs was demonstrated by the suberinic acids-bonded particleboard, while the highest area was detected from the high-density binder-less board obtained from SE hemp shives with the main compound of furfural (up to 70%) in all board types.

Volatile Organic Compounds (VOCs) Emitted from Coated Furniture Units

Volatile organic compounds (VOCs) are the main source influencing the overall air quality of an environment. It is a well-known fact that coated furniture units, in the form of paints and varnishes, emit VOCs, reducing the air quality and resulting in significant health problems. Exposure time to such compounds is also an important parameter regarding their possible health effects. Such issues also have a greater influence when the exposure period is extended. The main objective of this study was to review some of the important factors for the emission of VOCs from coated furniture, from the perspective of material characteristics, as well as health concerns. Some methods for controlling VOC emissions to improve indoor air quality, from the point of view recent regulations and suggestions, are also presented in this work.

Volatile Organic Compounds (VOCs) from Wood and Wood-Based Panels: Methods for Evaluation, Potential Health Risks, and Mitigation

Volatile organic compounds (VOCs) are contained in various construction materials and interior equipment. Their higher concentrations in the indoor air are associated with negative effects on human health and are disputed in terms of health risk, since people spend a considerable part of their lifetime indoors. Therefore, the presence of VOCs in indoor air is a case of concern regarding sick building syndrome (SBS). From a historical point of view, wood and wood-based panels represent a widely used material. Nevertheless, wood appears to be nowadays a product and a material of a sustainable future. Depending on wood extractives’ composition and an abundance of diverse wood species, different profiles of volatiles are emitted. In case of wood-based panels, the impact of adhesives and additives that are essentially applied aiming to adjust the panels’ properties is even enriching this cocktail of chemicals. This paper comprises the issue of VOCs emitted from wood and wood-based panels. The most abundant VOCs were summarized. The options of VOCs for analytical determination from these matrixes are described with their benefits and limitations.

Volatile Organic Compounds (VOCs) Removal from Indoor Air by Heterostructures/Composites/Doped Photocatalysts: A Mini-Review

The impact of volatile organic compounds (VOCs) on indoor air quality and, furthermore, on human health is still a subject of research investigations considering the large increase in forms of cancer and related diseases. VOCs can be 10 times higher in indoor air concentrations then that of the outdoors, as a consequence of emissions from electronics, building materials and consumer goods. Direct transformation of VOCs in mineralization products seems to be an alternative to reduce indoor air contaminants. The advantage of photocatalysis implementation in indoor air treatment is given by the absence of additional chemicals (such as H2O2) and waste. The present mini-review presents a comparative study on VOCs photocatalytic removal considering the photocatalyst composition, morphology and specific surface. The sheet-like morphology seems to provide a higher number of active sites which may contribute to oxidative reactions. The insertion of materials able to increase light absorbance or to mediate the charge carrier's transport will have a beneficial impact on the overall photocatalytic efficiency. Additionally, surface chemistry must be considered when developing photocatalysts for certain gas pollutants in order to favor molecule absorbance in the interfacial region. An energy consumption perspective is given based on the light intensity and irradiation period.

Comparison on Reduction of VOCs Emissions from Radiata Pine (Pinus Radiata D. Don) between Sodium Bicarbonate and Ozone Treatments

Volatile organic compounds (VOCs) in wood furniture are an important factor that affects indoor air quality. In this study, radiata pine (Pinus radiata D. Don) was treated with sodium bicarbonate and ozone aqueous solution to reduce the VOC contents without sacrificing mechanical properties. The VOCs of radiata pine were identified by gas chromatography-mass spectrometry (GC-MS), and the functional group changes of wood samples were characterized by Fourier-transform infrared spectroscopy (FTIR). The results showed that the main VOCs of radiata pine include alkenes, aldehydes, and esters. The sodium bicarbonate and ozone treatments almost eliminated the VOC contents of radiata pine. The two treatments mentioned above had little effect on compressive strength and surface color of radiata pine.

Emission of Volatile Organic Compounds from Heartwood and Sapwood of Selected Coniferous Species

The qualitative and quantitative composition of volatile organic compounds (VOC) emitted from furnishings from solid wood and all kinds of wood derivative materials depends on many factors, of which the most important is the wood species. The intraspecies and interspecies differences in VOC emission result from the differences in the chemical composition and anatomical structure of heartwood and sapwood of different species. VOC composition analysis was performed separately for heartwood and sapwood of Scots pine (Pinus sylvestris L.), Norway spruce (Picea abies (L.) Karst.) and European larch (Larix decidua Mill.) trees. The studies were conducted in a glass climatic chamber of 0.025 m3, equipped with a system for the monitoring and control of climatic conditions. Samples of air for analyses were collected after 3, 7, 14 and 28 days of exposure. The results provided evidence for interspecies and intraspecies differences in the qualitative and quantitative compositions of VOC. The concentration of total VOC (TVOC) released from heartwood of Scots pine was higher than that released from sapwood. For European larch and Norway spruce, the opposite relations were observed. The VOC emission from Scots pine heartwood was about 17 times higher than the emission from European larch and Norway spruce heartwood. The differences in TVOC emitted from the sapwood of samples from different species were smaller. For each of the species, the highest percentage contribution to TVOC was made by terpenes. The second highest percentage contribution in TVOC was made by compounds containing a carbonyl group, mainly aldehydes, while aromatic compounds made the third highest contribution.