Effect of Caffeine Copigmentation of Anthocyanin Dyes on DSSC Efficiency

The structure of anthocyanins and the copigmentation by common micromolecular copigments: A review

Under natural physiological conditions, anthocyanins can keep bright and stable color for a long time due to the relatively stable acid-base environment of plant vacuoles and the copigmentation from various copigment substances, such as polyphenols, nucleotides, metallic ions and other substances. Therefore, the copigmentation caused by copigments is considered an effective way to stabilize anthocyanins against adverse environmental conditions. This is attributed to the covalent and noncovalent interactions between colored forms of anthocyanins (flavylium ions and quinoidal bases) and colorless or pale yellow organic molecules (copigments). These interactions are usually manifested in both hyperchromic effect and bathochromic shifts. In addition to making anthocyanins more stable, the copigmentation also could make an important contribution to the diversification of their tone. Based on the molecular structure of anthocyanins, this review focuses on the interaction mode of auxochrome groups or copigments with anthocyanins and their effects on the chemical and color stability of anthocyanins.

Optical Properties of Electrospun Nanofiber Mats

Electrospun nanofiber mats are usually applied in fields where their high specific surface area and small pore sizes are important, such as biotechnology or filtration. Optically, they are mostly white due to scattering from the irregularly distributed, thin nanofibers. Nevertheless, their optical properties can be modified and become highly important for different applications, e.g., in sensing devices or solar cells, and sometimes for investigating their electronic or mechanical properties. This review gives an overview of typical optical properties of electrospun nanofiber mats, such as absorption and transmission, fluorescence and phosphorescence, scattering, polarized emission, dyeing and bathochromic shift as well as the correlation with dielectric constants and the extinction coefficient, showing which effects may occur and can be measured by which instruments or used for different applications.

Investigating the Recycling Potential of Glass Based Dye-Sensitized Solar Cells-Melting Experiment

The effects of climate change are becoming increasingly clear, and the urgency of solving the energy and resource crisis has been recognized by politicians and society. One of the most important solutions is sustainable energy technologies. The problem with the state of the art, however, is that production is energy-intensive and non-recyclable waste remains after the useful life. For monocrystalline photovoltaics, for example, there are recycling processes for glass and aluminum, but these must rather be described as downcycling. The semiconductor material is not recycled at all. Another promising technology for sustainable energy generation is dye-sensitized solar cells (DSSCs). Although efficiency and long-term stability still need to be improved, the technology has high potential to complement the state of the art. DSSCs have comparatively low production costs and can be manufactured without toxic components. In this work, we present the world' s first experiment to test the recycling potential of non-toxic glass-based DSSCs in a melting test. The glass constituents were analyzed by optical emission spectrometry with inductively coupled plasma (ICP-OES), and the surface was examined by scanning electron microscopy energy dispersive X-ray (SEM-EDX). The glass was melted in a furnace and compared to a standard glass recycling process. The results show that the described DSSCs are suitable for glass recycling and thus can potentially circulate in a circular economy without a downcycling process. However, material properties such as chemical resistance, transparency or viscosity are not investigated in this work and need further research.

Use of the catalytic complex TiO2/red cabbage anthocyanins to reduce the biofilm formation by planktonic bacteria

The bacterial cells dwelling within the biofilm usually develop resistance against common disinfectants. In this current study, to improve the effectiveness of photocatalytic treatment, a natural sensitizer in combination with unsupported titanium dioxide nanoparticles (TiO₂-NPs) was used to optimize the absorbance of NPs in the visible region and, to enhance the catalytic activity of the semiconductor. Different kinetic parameters were determined according to the first-order and the biphasic models to evaluate the ability of tested bacteria to form biofilm under different photocatalytic treatment conditions. As a result, the addition of red cabbage anthocyanins (RCA) as photosensitizer allows the enhancement of biocide activity of TiO₂-NPs and the reduction of biofilm formation by tested bacteria.

Investigation of the Long-Term Stability of Different Polymers and Their Blends with PEO to Produce Gel Polymer Electrolytes for Non-Toxic Dye-Sensitized Solar Cells

The electrolyte for dye-sensitized solar cells (DSSCs) is subject of constant innovation, as the problems of leakage and drying greatly reduce the long-term stability of a device. One possible way to solve these problems is the use of gel polymer electrolytes (GPEs) with a gelling structure, which offer different advantages based on the used polymers. Here, potential GPE systems based on dimethyl sulfoxide (DMSO) as solvent for low-cost, non-toxic and environmentally friendly DSSCs were investigated comparatively. In order to observe a potential improvement in long-term stability, the efficiencies of DSSCs with different GPEs, consisting of polyacrylonitrile (PAN), acrylonitrile-butadiene-styrene (ABS), polyvinyl alcohol (PVA) and poly (vinylidene fluoride) (PVDF) and their blends with poly (ethylene oxide) (PEO), were investigated over a period of 120 days. The results indicate that blending the polymers with PEO achieves better results concerning long-term stability and overall efficiency. Especially the mixtures with PAN and PVDF show only slight signs of deterioration after 120 days of measurement.

Plant-Derived Colorants for Food, Cosmetic and Textile Industries: A Review

This review provides a report on properties and recent research advances in the application of plant-derived colorants in food, cosmetics and textile materials. The following colorants are reviewed: Polyphenols (anthocyanins, flavonol-quercetin and curcumin), isoprenoids (iridoids, carotenoids and quinones), N-heterocyclic compounds (betalains and indigoids), melanins and tetrapyrroles with potential application in industry. Future aspects regarding applications of plant-derived colorants in the coloration of various materials are also discussed.

Adhesion of Electrospun Poly(acrylonitrile) Nanofibers on Conductive and Isolating Foil Substrates

Electrospinning can be used to prepare nanofibers from various polymers and polymer blends. The adhesion of nanofibers to the substrates on which they are electrospun varies greatly with the substrate material and structure. In some cases, good adhesion is desired to produce sandwich structures by electrospinning one material directly onto another. This is the case, e.g., with dye-sensitized solar cells (DSSCs). While both pure foil DSSCs and pure electrospun DSSCs have been examined, a combination of both technologies can be used to combine their advantages, e.g., the lateral strength of foils with the large surface-to-volume ratio of electrospun nanofibers. Here, we investigate the morphology and adhesion of electrospun nanofibers on different foil substrates containing materials commonly used in DSSCs, such as graphite, poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) or TiO2. The results show that the foil material strongly influences the adhesion, while a plasma pretreatment of the foils showed no significant effect. Moreover, it is well known that conductive substrates can alter the morphology of nanofiber mats, both at microscopic and macroscopic levels. However, these effects could not be observed in the current study.

Long-Term Stability Improvement of Non-Toxic Dye-Sensitized Solar Cells via Poly(ethylene oxide) Gel Electrolytes for Future Textile-Based Solar Cells

To overcome the long-term stability problems of dye-sensitized solar cells (DSSC) due to solvent evaporation and leakage, gelling the electrolyte with polymers is an appropriate option. Especially for future applications of textile-based DSSCs, which require cost-effective and environmentally friendly materials, such an improvement of the electrolyte is necessary. Therefore, the temporal progressions of efficiencies and fill factors of non-toxic glass-based DSSCs resulting from different gel electrolytes with poly(ethylene oxide) (PEO) are investigated over 52 days comparatively. Dimethyl sulfoxide (DMSO) proved to be a suitable non-toxic solvent for the proposed gel electrolyte without ionic liquids. A PEO concentration of 17.4 wt% resulted in an optimal compromise with a relatively high efficiency over the entire period. Lower concentrations resulted in higher efficiencies during the first days but in a poorer long-term stability, whereas a higher PEO concentration resulted in an overall lower efficiency. Solvent remaining in the gel electrolyte during application was found advantageous compared to previous solvent evaporation. In contrast to a commercial liquid electrolyte, the long-term stability regarding the efficiency was improved successfully with a similar fill factor and thus equal quality.

Recent Developments of Solar Cells from PbS Colloidal Quantum Dots

PbS (lead sulfide) colloidal quantum dots consist of crystallites with diameters in the nanometer range with organic molecules on their surfaces, partly with additional metal complexes as ligands. These surface molecules are responsible for solubility and prevent aggregation, but the interface between semiconductor quantum dots and ligands also influences the electronic structure. PbS quantum dots are especially interesting for optoelectronic applications and spectroscopic techniques, including photoluminescence, photodiodes and solar cells. Here we concentrate on the latter, giving an overview of the optical properties of solar cells prepared with PbS colloidal quantum dots, produced by different methods and combined with diverse other materials, to reach high efficiencies and fill factors.

Electrospinning a Dye-Sensitized Solar Cell

Dye-sensitized solar cells (DSSCs) offer new possibilities to harvest solar energy by using non-toxic inexpensive materials. Since they can generally be produced on flexible substrates, several research groups investigated possibilities to integrate DSSCs in textile fabrics, either by coating full fabrics with the DSSC layer structure or by producing fiber-shaped DSSCs which were afterwards integrated into a textile fabric. Here we show a new approach, electrospinning all solid layers of the DSSC. We report on electrospinning the counter electrode with a graphite catalyst followed by a thin nonconductive barrier layer and preparing the front electrode by electrospinning semiconducting TiO2 from a polymer solution dyed with natural dyes. Both electrodes were coated with a conductive polymer before the system was finally filled with a fluid electrolyte. While the efficiency is lower than for glass-based cells, possible problems such as short-circuits—which often occur in fiber-based DSSCs—did not occur in this proof-of-concept. Since graphite particles did not fully cover the counter electrode in this first study, and the typical bathochromic shift indicating adsorption of dye molecules on the TiO2 layer was not observed, several ways are open to increase the efficiency in forthcoming studies.