Biofunctionalization with a TGFβ-1 Inhibitor Peptide in the Osseointegration of Synthetic Bone Grafts: An In Vivo Study in Beagle Dogs

Angiogenesis in bone tissue engineering via ceramic scaffolds: A review of concepts and recent advancements

Due to organ donor shortages, long transplant waitlists, and the complications/limitations associated with auto and allotransplantation, biomaterials and tissue-engineered models are gaining attention as feasible alternatives for replacing and reconstructing damaged organs and tissues. Among various tissue engineering applications, bone tissue engineering has become a promising strategy to replace or repair damaged bone. We aimed to provide an overview of bioactive ceramic scaffolds in bone tissue engineering, focusing on angiogenesis and the effect of different biofunctionalization strategies. Different routes to angiogenesis, including chemical induction through signaling molecules immobilized covalently or non-covalently, in situ secretion of angiogenic growth factors, and the degradation of inorganic scaffolds, are described. Physical induction mechanisms are also discussed, followed by a review of methods for fabricating bioactive ceramic scaffolds via microfabrication methods, such as photolithography and 3D printing. Finally, the strengths and weaknesses of the commonly used methodologies and future directions are discussed.

Effectiveness of maxillary cortical bone graft chips harvested by bone scraper, covered with platelet-rich fibrin (PRF), in reconstruction of alveolar clefts: comparative study

PURPOSE

The aim of this study is to assess the effectiveness of maxillary cortical bone graft chips harvested by bone scraper, covered with platelet-rich fibrin (PRF) in alveolar clefts.

PATIENTS AND METHODS

Seventy-two cleft patients were examined for their eligibility to be part in this comparative study; they were randomly divided into group A, thirty-six patients had received cancellous bone chips from iliac crest; group B, thirty-six had received cortical bone chips harvested from maxilla using a curved bone scraper, covered with PRF. The clinical success over the follow-up period was evaluated on the basis of elimination of the oronasal fistula, radiographic assessment of bone graft volume, achievement of the osseous continuity of the alveolar arch, and the extent of the vertical bone height.

RESULTS

The mean of volume gained in group A was 0.8053 ± 0.9682, while for group B was 0.7397 ± 0.7703. The amount of vertical bone loss between groups was registered, and the chi-square test revealed insignificant differences between study groups (p = 0.547). The result of the frequency of fistula development after grafting in both groups was insignificant (p = 0.074). Also, for the continuity of the maxilla as a one piece, the results were insignificant differences between study groups (p = 0.058).

CONCLUSION

In conclusion of our study, intraoral harvesting of maxillary cortical chips by bone scraper covered with PRF is able to achieve a valid functional and aesthetic support in alveolar cleft patients, meeting the reconstructive goals.

Bone marrow stromal cell-derived exosome combinate with fibrin on tantalum coating titanium implant accelerates osseointegration

This study aims to present a sustainably releasing system of exosomes-fibrin combinate loaded on tantalum-coating titanium implants. We hope to investigate potential effects of the system on osseointegration between tantalum coating titanium implants and its surrounding bone tissue. Exosomes derived from rabbit bone marrow stromal cells (rBMSCs) and fibrin were deposited onto the micro-nanostructure tantalum coating surface (Ta + exo + FI) and compared to control groups, including tantalum coating (Ta), tantalum coating loaded exosomes (Ta + exo) and tantalum coating loaded fibrin (Ta + FI). The optimal concentration of loading exosomes, exosomes uptake capacity by BMSCs, and the effect of controlled-release by fibrin were assessed by laser scanning confocal microscope (LCSM) and microplate reader. The optimal concentration of exosomes was 1 μg/μL. Adhesion, proliferation, and osteogenic differentiation ability of BMSCs on different materials were assessed in vitro. Finally, osseointegrative capacity of Ta, Ta + exo, Ta + FI, Ta + exo + FI implants in rabbit tibia were respectively evaluated with histology and bone-implant contact ratio (BIC%). It was demonstrated that exosome sustained-release system with fibrin loading on the tantalum coating was successfully established. Fibrin contribute to exosomes release extension from 2d to 6d. Furthermore, Ta + exo + FI significantly promoted adhesion, proliferation, and osteogenic differentiation of BMSCs. In vivo, the implants in Ta + exo + FI group displayed the highest osseointegrative capability than those in other groups. It is concluded that this exosome delivery system on the implants may be an effective way for tantalum coating titanium implants to promote osseointegration between implant and its surrounding bone tissue.

Peptides in Dentistry: A Scoping Review

Currently, it remains unclear which specific peptides could be appropriate for applications in different fields of dentistry. The aim of this scoping review was to scan the contemporary scientific papers related to the types, uses and applications of peptides in dentistry at the moment. Literature database searches were performed in the following databases: PubMed/MEDLINE, Scopus, Web of Science, Embase, and Scielo. A total of 133 articles involving the use of peptides in dentistry-related applications were included. The studies involved experimental designs in animals, microorganisms, or cells; clinical trials were also identified within this review. Most of the applications of peptides included caries management, implant osseointegration, guided tissue regeneration, vital pulp therapy, antimicrobial activity, enamel remineralization, periodontal therapy, the surface modification of tooth implants, and the modification of other restorative materials such as dental adhesives and denture base resins. The in vitro and in vivo studies included in this review suggested that peptides may have beneficial effects for treating early carious lesions, promoting cell adhesion, enhancing the adhesion strength of dental implants, and in tissue engineering as healthy promotors of the periodontium and antimicrobial agents. The lack of clinical trials should be highlighted, leaving a wide space available for the investigation of peptides in dentistry.

Long-Term Clinical Study of Implants Placed in Maxillary Sinus Floor Augmentation Using Beta-Tricalcium Phosphate

Introduction. The aim of this study was to show the long-term clinical outcomes of implants placed in maxillary sinus floor augmentation (MFSA) using beta-tricalcium phosphate (β-TCP). Patients and methods. Maxillary patients were diagnosed for MFSA and used beta- β-TCP. After the lateral sinus surgery, implants were loaded at 6 months with restorations. The clinical follow-up was at 10 years. Results. One hundred and one patients (58 females and 43 males) were treated with MFSA. Twenty-nine patients (28.7%) had a history of periodontitis. Thirty-three patients (32.7%) were smokers. One hundred and twenty-one MFSA, 81 unilateral and 20 bilateral sites, with 234 implants were performed. The average vertical bone height available was 4.92 ± 1.83 mm. The average vertical bone gain obtained was 6.95 ± 2.19 mm following MFSA. The implant cumulative survival rate was 97.2%. Three implants (1.3%) were lost during the healing period. Six implants (2.6%) were lost by peri-implantitis. One hundred and fifteen restorations were placed in the patients. Mean marginal bone loss was 1.93 mm ± 1.03 mm. Six patients (27.3%) showed technical complications. Thirty-six implants (15.3%) in 14 patients (13.9%) were associated with peri-implantitis. Conclusions. This study indicates that treatment with implant-supported restoration by MFSA using β-TCP constitutes a successful implant approach.

Maxillary Sinus Augmentation Using Ceramic Alloplastic Granules or Paste: An Experimental Study in Rabbits

BACKGROUND

Due to the lack of data comparing the biological behavior of two formulations, granules and paste, of alloplastic graft from microtomographic and histomorphometric points of view, the aim of the present experiment was to compare the histomorphometric and microtomographic healing of two formulations, i.e., granules (MR sites) or paste (MR-inject sites) of an alloplastic graft composed of a combination of beta-tricalcium phosphate and hydroxyapatite used for maxillary sinus lifting.

METHODS

A sinus lifting procedure was carried out bilaterally in 20 rabbits, and the elevated space was filled with either paste or granules of an alloplastic material. A collagen membrane was placed on the antrostomy and the animals were euthanized after 2 or 10 weeks, 10 animals each group. Microtomographic and histological analyses were performed.

RESULTS

Higher proportions of new bone formation were found at the MR, compared to the MR-inject sites both after 2 weeks (2.65 ± 2.89% vs. 0.08 ± 0.12%; p < 0.01) and 10 weeks of healing (34.20 ± 13.86 vs. 23.28 ± 10.35%; p = 0.022).

CONCLUSIONS

It was concluded that new bone formation was faster in the MR sites, compared to the MR-inject. However, a longer time of healing should be allowed to make final conclusions about the efficiency in bone formation of the paste formulation of the biomaterial used in the present study.

Recent Advances of Biphasic Calcium Phosphate Bioceramics for Bone Tissue Regeneration

Biphasic calcium phosphate bioceramics consist of an intimate mixture of hydroxyapatite (HA) and beta-tricalcium phosphate (β-TCP) in varying ratios. Due to their biocompatibility, osteoconductivity, and safety in in vitro, in vivo, and clinical models, they have become promising bone substitute biomaterials and are recommended for use as alternatives for or as additives in bone tissue regeneration in various orthopedic and dental applications. Many studies have demonstrated the potential uses of BCP bioceramics as scaffolds for tissue engineering. Here, we highlight the recent advances in the uses of BCP bioceramics and functionalized BCPs for bone tissue regeneration.

Functionalized calcium orthophosphates (CaPO4) and their biomedical applications

Due to the chemical similarity to natural calcified tissues (bones and teeth) of mammals, calcium orthophosphates (abbreviated as CaPO₄) appear to be good biomaterials for creation of artificial bone grafts. However, CaPO₄ alone have some restrictions, which limit their biomedical applications. Various ways have been developed to improve the properties of CaPO₄ and their functionalization is one of them. Namely, since surfaces always form the interfaces between implanted grafts and surrounding tissues, the state of CaPO₄ surfaces plays a crucial role in the survival of bone grafts. Although the biomedically relevant CaPO₄ possess the required biocompatible properties, some of their properties could be better. For example, functionalization of CaPO₄ to enhance cell attachment and cell material interactions has been developed. In addition, to prepare stable formulations from nanodimensional CaPO₄ particles and prevent them from agglomerating, the surfaces of CaPO₄ particles are often functionalized by sorption of special chemicals. Furthermore, there are functionalizations in which CaPO₄ are exposed to various types of physical treatments. This review summarizes the available knowledge on CaPO₄ functionalizations and their biomedical applications.