Synthesis, Characterization and Kinetic Behavior of Supported Cobalt Catalysts for Oxidative after-Treatment of Methane Lean Mixtures

Ru-Induced Defect Engineering in Co3O4 Lattice for High Performance Electrochemical Reduction of Nitrate to Ammonium

Amidst these growing sustainability concerns, producing NH4 + via electrochemical NO3 - reduction reaction (NO3RR) emerges as a promising alternative to the conventional Haber-Bosch process. In a pioneering approach, this study introduces Ru incorporation into Co3O4 lattices at the nanoscale and further couples it with electroreduction conditioning (ERC) treatment as a strategy to enhance metal oxide reducibility and induce oxygen vacancies, advancing NH4 + production from NO3RR. Here, supported by a suite of ex situ and in situ characterization measurements, the findings reveal that Ru enrichment promotes Co species reduction and oxygen vacancy formation. Further, as evidenced by the theoretical calculations, Ru integration lowers the energy barrier for oxygen vacancy formation, thereby facilitating a more energy-efficient NO3RR-to-NH4 + pathway. Optimal catalytic activity is realized with a Ru loading of 10 at.% (named 10Ru/Co3O4), achieving a high NH4 + production rate (98 nmol s-1 cm-2), selectivity (97.5%) and current density (≈100 mA cm-2) at -1.0 V vs RHE. The findings not only provide insights into defect engineering via the incorporation of secondary sites but also lay the groundwork for innovative catalyst design aimed at improving NH4 + yield from NO3RR. This research contributes to the ongoing efforts to develop sustainable electrochemical processes for nitrogen cycle management.

Skin-effect-mediated magnetoionic control of charge transport in thick layers

In the rapidly developing area of magnetoionics (MI), which combines electrochemistry and magnetism, changes in the surface chemistry of magnetic materials in response to gate voltages cause dramatic modifications in the magnetic characteristics, resulting in low power-consuming charge transport tuning. Due to the surficial character, only magnetic thin films have been addressed for the MI effect's role in controlling charge transfer. Here, we show how it can be used to regulate the transit of charges in bulk magnetic materials. This is accomplished by combining high-permeability magnetic materials with a high-frequency passing current, allowing the skin effect and the MI effect to control the magnetic materials' impedance due to the impedance's high sensitivity to magnetic permeability. Our in-situ impedance measurement and magneto-optical characterization show the role of redox reactions at the surface in controlling impedance in magnetic materials. This research paves the way for using the MI effect in high-permeability bulk magnetic materials.

Recent Advances in Co3O4-Based Composites: Synthesis and Application in Combustion of Methane

In recent years, it has been found that adjusting the organizational structure of Co₃O₄ through solid solution and other methods can effectively improve its catalytic performance for the oxidation of low concentration methane. Its catalytic activity is close to that of metal Pd, which is expected to replace costly noble metal catalysts. Therefore, the in-depth research on the mechanism and methods of Co₃O₄ microstructure regulation has very important academic value and economic benefits. In this paper, we reviewed the catalytic oxidation mechanism, microstructure regulation mechanism, and methods of nano-Co₃O₄ on methane gas, which provides reference for the development of high-activity Co₃O₄-based methane combustion catalysts. Through literature investigation, it is found that the surface energy state of nano-Co₃O₄ can be adjusted by loading of noble metals, resulting in the reduction of Co-O bond strength, thus accelerating the formation of reactive oxygen species chemical bonds, and improving its catalytic effect. Secondly, the use of metal oxides and non-metallic oxide carriers helps to disperse and stabilize cobalt ions, improve the structural elasticity of Co₃O₄, and ultimately improve its catalytic performance. In addition, the performance of the catalyst can be improved by adjusting the microstructure of the composite catalyst and optimizing the preparation process. In this review, we summarize the catalytic mechanism and microstructure regulation of nano-Co₃O₄ and its composite catalysts (embedded with noble metals or combined with metallic and nonmetallic oxides) for methane combustion. Notably, this review delves into the substance of measures that can be used to improve the catalytic performance of Co₃O₄, highlighting the constructive role of components in composite catalysts that can improve the catalytic capacity of Co₃O₄. Firstly, the research status of Co₃O₄ composite catalyst is reviewed in this paper. It is hoped that relevant researchers can get inspiration from this paper and develop high-activity Co₃O₄-based methane combustion catalyst.

Insights into the Reaction Routes for H2 Formation in the Ethanol Steam Reforming on a Catalyst Derived from NiAl2O4 Spinel

This work describes the satisfactory performance of a Ni/Al₂O₃ catalyst derived from NiAl₂O₄ spinel in ethanol steam reforming and focuses on studying the prevailing reaction routes for H₂ formation in this system. NiAl₂O₄ spinel was synthesized using a coprecipitation method and reduced at 850 °C to obtain a Ni/Al₂O₃ catalyst. The spinel structure and catalyst were characterized using XRD, TPR, N₂ physisorption, NH₃ adsorption and TPD, TPO, SEM, and TEM. The experiments were carried out in a fluidized-bed reactor at 500 or 600 °C and different space-time values, using pure ethanol, ethanol-water, pure ethylene, or ethylene-water feeds. The reaction takes place through two paired routes activated by each catalyst function (metal and acid sites) whose extent is limited by the selective catalyst deactivation. The results evidence that at the beginning of the reaction the main route for the formation of H₂ and carbon (nanotubes) is the dehydration of ethanol on acid sites followed by decomposition of ethylene on the Ni-Al₂O₃ interface. This route is favored at 500 °C. After the rapid deactivation of the catalyst for ethylene decomposition, the route of H₂ formation by steam reforming of ethanol and water gas shift reactions over Ni sites is favored. The morphology of the carbon deposits (nanotubes) allows the catalyst to maintain a notable activity for the latter pathways, with stable formation of H₂ (during 48 h in the experiments carried out). At 600 °C, the extent of the gasification reaction of carbon species lowers the carbon material formation. The high formation of carbon material is interesting for the coproduction of H₂ and carbon nanotubes with low CO₂ emissions.

Green synthesis of CeO2 and Zr/Sn-dual doped CeO2 nanoparticles with photoantioxidant and antibiofilm activities

Cerium oxide (CeO2) and 1%, 5% and 10% zirconium/tin-dual doped CeO2 nanoparticles (Zr/Sn-dual doped CeO2 NPs) were synthesized using an aqueous leaf extract of Pometia pinnata. By using UV-visible diffuse reflectance spectroscopy, the band gap energies of these materials were found to be in the range of ∼2.49 to 2.66 eV. The average crystallite sizes of the fluorite phase obtained from X-ray diffraction were between 7 and 16 nm. X-ray photoelectron spectroscopy (XPS) analysis further confirmed the synthesis of CeO2 and Sn-doped CeO2 NPs. Almost spherical shapes of the nanomaterials with an average particle size of 12-17 nm were determined using scanning electron microscopy and transmission electron microscopy studies. Photoantioxidant activities of the synthesized materials showed enhanced photoantioxidant response under visible light irradiation in comparison with those under dark conditions in both dose- and time-dependent manner. The CeO2 NPs exhibited a significant concentration-dependent antibiofilm activity against the Gram-positive bacteria Staphylococcus aureus (S. aureus) and Listeria monocytogenes (L. monocytogenes). Only the 10% Zr/Sn-dual doped-CeO2 NPs were found to inhibit S. aureus biofilm formation at higher concentrations. All Zr/Sn-dual doped CeO2 NPs exhibited a concentration-dependent biofilm inhibition of L. monocytogenes and also bactericidal activity towards S. aureus. These nanomaterials exhibited enhanced photoantioxidant activities and antibacterial properties, which make them suitable for various biological applications.

Cobalt Based Catalysts on Alkali-Activated Zeolite Foams for N2O Decomposition

In this work, we studied the effect of alkali-activated zeolite foams modifications on properties and catalytic activity of cobalt phases in the process of catalytic decomposition of N2O. The zeolite foam supports were prepared by alkali activation of natural zeolite followed by acid leaching and ion exchange. The cobalt catalysts were synthesised by a different deposition technique (direct ion exchange (DIE) and incipient wetness impregnation (IWI) method of cobalt on zeolite foams. For comparison, catalysts on selected supports were prepared and the properties of all were compared in catalytic tests in the pellet form and as crushed catalysts to determine the effect of internal diffusion. The catalysts and supports were in detail characterized by a variety of techniques. The catalyst activity strongly depended on the structure of support and synthesis procedure of a cobalt catalyst. Ion exchange method provided active phase with higher surface areas and sites with better reducibility, both of these factors contributed to higher N2O conversions of more than 80% at 450 °C. A large influence can also be attributed to the presence of alkali metals, in particular, potassium, which resulted in a modification of electronic and acid base properties of the cobalt oxide phase on the catalyst surface. The promotional effect of potassium is better reducibility of cobalt species.