Synthesis of ZnO-NPs Using a Convolvulus arvensis Leaf Extract and Proving its Efficiency as an Inhibitor of Carbon Steel Corrosion

Adsorption and Surface Analysis of Sodium Phosphate Corrosion Inhibitor on Carbon Steel in Simulated Concrete Pore Solution

Corrosion of steel-reinforced concrete exposed to marine environments could lead to structural catastrophic failure in service. Hence, the construction industry is seeking novel corrosion preventive methods that are effective, cheap, and non-toxic. In this regard, the inhibitive properties of sodium phosphate (Na₃PO₄) corrosion inhibitor have been investigated for carbon steel reinforcements in 0.6 M Cl^- contaminated simulated concrete pore solution (SCPS). Different electrochemical testing has been utilized including potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and Mott-Schottky plots to test Na₃PO₄ at different concentrations: 0.05, 0.1, 0.3, and 0.6 M. It was found that Na₃PO₄ adsorbs on the surface through a combined physicochemical adsorption process, thus creating insoluble protective ferric phosphate film (FePO₄) and achieving an inhibition efficiency (IE) up to 91.7%. The formation of FePO₄ was elucidated by means of Fourier-transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS). Quantum chemical parameters using density functional theory (DFT) were obtained to further understand the chemical interactions at the interface. It was found that PO₄^3- ions have a low energy gap (ΔE_gap), hence facilitating their adsorption. Additionally, Mulliken population analysis showed that the oxygen atoms present in PO4^3- are strong nucleophiles, thus acting as adsorption sites.

Effect of Quaternary Ammonium Salts and 1,2,4-Triazole Derivatives on Hydrogen Absorption by Mild Steel in Hydrochloric Acid Solution

The treatment of low-carbon steel items with hydrochloric acid solutions is used in many industrial technologies. This process is accompanied not only by metal corrosion losses, but also by hydrogen absorption by the metal. In this study, the kinetics of hydrogen cathodic reduction on low-carbon steel in 2 M HCl containing corrosion inhibitors, namely, quaternary ammonium salts and a 3-substituted 1,2,4-triazole, have been studied. Adsorption isotherms of corrosion inhibitors on cathodically polarized steel surface have been obtained. XPS data provide valuable information on the composition and structure of protective layers formed on steel in HCl solutions containing inhibitors. The main rate constants of the stages of gaseous hydrogen evolution and incorporation of hydrogen atoms into the metal have been determined. The addition of quaternary ammonium salts or 3-substituted 1,2,4-triazole inhibits the cathodic reduction of hydrogen and its penetration into steel in the HCl solution. 3-substituted 1,2,4-triazole is the most efficient inhibitor of hydrogen absorption. The inhibitory effect of this compound is caused by a decrease in the ratio of the hydrogen concentration in the metal phase to the degree of surface coverage with hydrogen. The maximum decrease in hydrogen concentration in the metal bulk in the presence of the 3-substituted 1,2,4-triazole is 8.2-fold, which determines the preservation of the plastic properties of steel as it corrodes in HCl solutions. The high efficiency of the 3-substituted 1,2,4-triazole as an inhibitor of hydrogen cathodic reduction and absorption results from strong (chemical) adsorption of this compound on the steel surface and the formation of a polymolecular protective layer.

The Use of Synthesized CoO/Co3O4 Nanoparticles as A Corrosion Inhibitor of Low-Carbon Steel in 1 M HCl

CoO/Co₃O₄ nanoparticles (CoO/Co₃O₄ NPs) were synthesized with egg white. The effectiveness of CoO/Co₃O₄ NPs to inhibit the corrosion of carbon steel has verified in acidic medium (1 M HCl). It has been found that Langmuir adsorption isotherm is the dominant adsorption process of CoO/Co₃O₄ NPs on the surface of low-carbon steel. The thermodynamic parameters also demonstrated that the adsorption process of CoO/Co₃O₄ NPs was a physicochemical, spontaneous, and exothermic process. The electrochemical impedance spectroscopy technique and potentiodynamic polarization were applied. The results obtained in this study showed that CoO/Co₃O₄ NPs acted as a mixed inhibitor for the anodic reaction and the cathodic reaction, and the efficiency to inhibit the corrosion was 93% at 80 ppm of the inhibitor. The results of scanning electron microscopy (SEM) technique, energy-dispersive X-ray spectroscopy (EDS), and X-ray electron spectroscopy (XPS) confirmed the effectiveness that was obtained using the inhibitor to protect the surface of low carbon steel. Thus, low-carbon steel can be protected against corrosion in acidic medium using CoO/Co₃O₄ NPs as inhibitors.

The Synthesis and Effect of Silver Nanoparticles on the Adsorption of Cu2+ from Aqueous Solutions

The adsorption of Cu2+ ions from an aqueous solution using AgNPs synthesized from Convolvulus arvensis leaf extract was investigated. The characterization of AgNPs was investigated before and after the adsorption of Cu2+ ions via Fourier-transform infrared spectroscopy (FTIR), energy-dispersive X-ray spectroscopy (EDS), and scanning electron microscopy (SEM) analyses. The adsorbent contained various functional groups in addition to the AgNPs, which contributed to the Cu2+ ions adsorption. The silver nanoparticle surface consisted of spherical particles and deep pores, which adsorbed numerous Cu2+ ions. The influences of dosage, pH, and contact time on adsorption of 10 and 50 mg/L Cu2+ at 298 K, and initial Cu2+ concentrations at 298 and 323 K were studied. It was found that the highest percentage of Cu2+ ions adsorbed from an aqueous solution was 98.99%; the aqueous solution had 10 mg/L of Cu2+ ions and 0.2 g of AgNPs, at pH 12 and 298 K. A pseudo-second kinetics model offered the most accurate description of the process of adsorption. The process of Cu2+ adsorption more resembled a Langmuir rather than a Freundlich isotherm model, including chemical and physical mixed adsorption (mixed adsorption) processes, and was exothermic and spontaneous.