Crosslinking Dynamics and Gelation Characteristics of Photo- and Thermally Polymerized Poly(Ethylene Glycol) Hydrogels

Preparation of PEG/P(U-AM-ChCl) composite hydrogels using ternary DES light polymerization and their properties

Deep eutectic solvents (DES) were prepared using urea (U) and acrylamide (AM) as hydrogen bond donors (HBD) and choline chloride (ChCl) as hydrogen bond acceptor (HBA), and polyethylene glycol (PEG) was selected as a filler and uniformly dispersed in DES to prepare PEG/P(U-AM-ChCl) composite hydrogels by light polymerization. The composite hydrogels were characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). The effects of the content of PEG on the swelling properties, mechanical properties and fatigue resistance of the composite hydrogels were investigated. The results showed that the compressive strength and fatigue strength of the composite hydrogels were gradually enhanced with the increase of the PEG content in the composite hydrogels, in which the maximum compressive strength of the hydrogels with 1 wt% PEG added was increased by 1.86 times. The composite hydrogel had excellent swelling properties, and the equilibrium swelling degree of the hydrogel with 1 wt% PEG added reached 10.15. Meanwhile, the PEG/P(U-AM-ChCl) composite hydrogel had excellent self-healing properties, and the self-healing rate of the composite hydrogel with a PFG content of 1 wt% could reach 91.93% after 48 hours of healing. This study provides a convenient and efficient method to prepare composite hydrogels with superior swelling properties and self-healing properties.

Design and assembly of biodegradable capsules based on alginate hydrogel composite for the encapsulation of blue dye

The encapsulation of bluing agents in biodegradable polymeric capsules is an emerging option in laundry detergents sector to substitute formaldehyde-based polymers, because they are non-biodegradable, carcinogenic and toxic. In this work, we present for the first time the successful encapsulation of a blue dye in biodegradable capsules which shell was formed by an alginate hydrogel and a polyethylene glycol network. Different types of capsules were synthesized (addition or not of the diacrylate monomer) and irradiation of the crosslinking solution at different times. Furthermore, a deep characterization of each type of capsules was performed (chemical and morphological characterization, assessment of their mechanical and thermal properties, evaluation of their biodegradability), noting that the incorporation of the diacrylate monomer (PEGDMA) and the two different irradiation times selected substantially affected the final properties of the capsules. The obtained results will serve to comprehend how the dye can be released from the capsules.

Drug delivery systems based on polyethylene glycol hydrogels for enhanced bone regeneration

Drug delivery systems composed of osteogenic substances and biological materials are of great significance in enhancing bone regeneration, and appropriate biological carriers are the cornerstone for their construction. Polyethylene glycol (PEG) is favored in bone tissue engineering due to its good biocompatibility and hydrophilicity. When combined with other substances, the physicochemical properties of PEG-based hydrogels fully meet the requirements of drug delivery carriers. Therefore, this paper reviews the application of PEG-based hydrogels in the treatment of bone defects. The advantages and disadvantages of PEG as a carrier are analyzed, and various modification methods of PEG hydrogels are summarized. On this basis, the application of PEG-based hydrogel drug delivery systems in promoting bone regeneration in recent years is summarized. Finally, the shortcomings and future developments of PEG-based hydrogel drug delivery systems are discussed. This review provides a theoretical basis and fabrication strategy for the application of PEG-based composite drug delivery systems in local bone defects.

Photo-curable carboxymethylcellulose composite hydrogel as a promising biomaterial for biomedical applications

A series of carboxymethylcellulose (CMC) functionalized with glycidyl methacrylate (GMA) was successfully synthesized for producing of CMC-g-GMA copolymer. Water-soluble CMC-g-GMA copolymer was photo-crosslinked while Irgacure-2959 was used as a UV-photo-initiator at 365 nm. On the other hand, cellulose nanocrystals (CNCs) from sugarcane were graft-copolymerized in an aqueous solution utilizing cerium ammonium nitrate (CAN) as an initiator in a redox-initiated free-radical approach. CNCs were grafted with GMA to enhance their physicochemical and biological characteristics. Factors affecting hydrogel formation, e.g. CMC-g-GMA copolymer concentration, irradiation time and incorporation of different concentration of CNCs-g-GMA nano-filler, were discussed in dependance on the swelling degree and gel fraction of the produced hydrogels. Notably, the addition of CNCs-g-GMA nanofillers increased progressively thermal stability of the prepared hydrogel. CMC-g-GMA filled with CNCs-g-GMA composite hydrogel showed antimicrobial activity against multidrug resistance pathogens. Thus, CMC-g-GMA filled with CNCs-g-GMA composite hydrogel could be endorsed as compatible biomaterials for versatile biomedical applications.

Photochromic TiO2/PEGDA organogels

Photochromic materials can be used for modulation of the visible and infrared light transmittance for providing privacy or energy saving by blocking the heat. Titanium dioxide (TiO₂) nanoparticles has been well reported as a promising photochromic material. However, a high photochromic response from TiO₂ can be observed only when the nanoparticles are dispersed in a strong photogenerated hole scavenger at a liquid state, but polymer composites are less responsive due to lack of hole scavenging capability. However, it is intricate to apply suspensions in real window devices because of possible leaking. Here, we describe the preparation of TiO₂ quantum dot (QD)-based gels from polyethylene glycol diacrylate (PEGDA), N,N-Dimethylformamide (DMF), and ethanol (EtOH). Photochromic gels with TiO₂ contents (1-5 volume%) show performance comparable to their colloidal counterparts with capable of photodarkening within 30 min with a transmittance change ranging from 35.8 to 84.5% at 550 nm. These gels were capable of fully recovering the initial transmittance when not exposed to ultraviolet (UV) light within 3-8 h. The photochromic gel systems with ethanol shows reasonable stability by decreasing in transmittance recovery only by less than 10% in 10 cycles. A potential application for the developed photochromic gels can be photochromic windows.

UV-VIS Curable PEG Hydrogels for Biomedical Applications with Multifunctionality

Multifunctional biomedical materials capable of integrating optical functions are highly desirable for many applications, such as advanced intra-ocular lens (IOL) implants. Therefore, poly(ethylene glycol)-diacrylate (PEG-DA) hydrogels are used with different photoinitiators (PI). In addition to standard UV PI Irgacure, Erythrosin B and Eosin Y are used as PI with high sensitivity in the optical range of the spectrum. The minimum PI concentrations for producing new hydrogels with PEG-DA and different PIs were determined. Hydrogel films were obtained, which were applicable for light-based patterning and, hence, the functionalization of surface and volume. Cytotoxicity tests confirm cytocompatibility of hydrogels and compositions. Exploiting the correlation of structure and function allows biomedical materials with multifunctionality.

Effect of Silica Nanoparticles Blocked with Epoxy Groups on the Crosslinking and Surface Properties of PEG Hydrogel Films

Silica nanoparticles (G-SiNPs) blocked with 3-glycidoxypropyl trimethoxysilane (GPTS) were newly applied to hydrogel films for improving film coating properties and to distribute the epoxy groups on the film surface. The effects of the content of epoxy-functionalized G-SiNPs on the crosslinking features by photo-induced radical polymerization and the surface mechanical properties of the hydrogel films containing poly(ethylene glycol) dimethacrylate (PEGDMA) and glycidyl methacrylate (GMA) were investigated. The real-time elastic modulus of various PEG hydrogel mixtures with prepared particles was monitored using a rotational rheometer. The distribution of epoxy groups on the crosslinked film surface was directly and indirectly estimated by the elemental analysis of Si and Br. The surface mechanical properties of various hydrogel films were measured by nano-indentation and nano-scratch tests. The relationship between the rheological and surface properties of PEG-based hydrogel films suggests that the use of small amounts of G-SiNPs enhances the surface hardness and crosslinked network of the film and uniformly distributes sufficient epoxy groups on the film surface for further coating applications.