Comparative Study on Chloride Binding Capacity of Cement-Fly Ash System and Cement-Ground Granulated Blast Furnace Slag System with Diethanol-Isopropanolamine

Experiments on Chloride Binding and Its Release by Sulfates in Cementitious Materials

The aim of this study was to experimentally investigate the process of chloride binding and its sulfate-induced release in cementitious materials. The cementitious materials were replaced with hardened cement paste particles (HCPs) with water-to-cement ratios (w/c) of 0.35 and 0.45. A long-term immersion experiment of HCPs in 0.1 M sodium chloride solution was performed to investigate its chloride-binding capacity, and then it was immersed in sodium sulfate solutions with concentrations of 0.1 and 0.5 M to explore the release of chloride binding induced by sulfates. Silver nitrate titration and quantitative X-ray diffraction (QXRD) were used to measure the concentration of free chlorides in the solutions and the content of bound chlorides in HCPs, respectively. The results show that there is a higher chloride-binding capacity in HCPs with a w/c ratio of 0.45 compared to 0.35, and the content of chemically bound chlorides is associated with the formation and decomposition of Friedel's and Kuzel's salts in HCPs. The presence of sulfates can easily result in the release of bound chlorides in Friedel's salt, but it cannot cause a complete release of bound chlorides in Kuzel's salt. Physically bound chlorides are more easily released by sulfates than chemically bound chlorides, and a high w/c ratio or sulfate concentration can increase the release rate of bound chlorides in HCPs.

Influences of Friedel's Salt Produced by CaO-Activated Titanium-Extracted Tailing Slag on Chloride Binding

Titanium-extracted tailing slag (TETS) has high activity, but the content of chloride ions is high. To effectively bind the chloride ions, CaO was used to activate the TETS, and the solidified cementitious material of CaO-activated TETS was prepared. The effects of CaO content and curing age on the strength of solidified samples, chloride binding capacity, and chloride binding mechanism were studied. By means of XRD, FTIR, SEM, and EDS, the hydration reaction products, microstructure, morphology, and micro-components of the solidified sample were characterized. The results show that the chloride ions can be effectively bound by using CaO to activate TETS with higher mechanical strength. When the CaO content is 10 wt%, the strength of the 28-day-cured body can reach more than 20 MPa, the chloride ion binding amount is 38.93 mg/g, and the chloride binding rate is as high as 68%. The new product phases of the solidified sample are mainly Friedel's salt (FS) and calcite, in which the amount of FS production and the degree of crystal development are affected by the CaO content and curing age. The chloride binding ions in the solidified sample are mainly the chemical binding by FS. The FS diffraction peak strength increases with the increase of CaO content and curing age, but the calcite diffraction peak strength is less affected by them. FS mainly accumulates and grows in the pores of the solidified sample. It can optimize the pore structure of the solidified sample and improve the strength of the solidified sample while binding chloride ions. The results can provide useful information for the resource utilization of chlorine-containing TETS, the improvement of durability of Marine concrete, and the application of sea sand in concrete.