Effect of Honeycomb β-TCP Geometrical Structure on Bone Tissue Regeneration in Skull Defect

Faster Bone Gap Union in Medial Opening Wedge High Tibial Osteotomy With 3D-Printed Synthetic Bioresorbable Polycaprolactone and Tricalcium Phosphate Osteotomy Gap Fillers Compared to Allogeneic Osteotomy Gap Fillers: A Retrospective Matched-Pair Cohort Study

OBJECTIVE

The use of synthetic bone substitute material (BSM) as osteotomy gap fillers have been reported to improve outcomes in medial opening wedge high tibial osteotomy (MOWHTO). This study aims to evaluate the early radiological outcomes (bone union) and complication rates of the novel patient-specific 3D-printed honeycomb-structured polycaprolactone and tricalcium phosphate (PCL-TCP) synthetic graft compared to allogeneic bone grafts as an osteotomy gap filler in MOWHTO.

METHODS

A retrospective matched-pair analysis of patients who underwent MOWHTO with either PCL-TCP synthetic graft or allogenic femoral head allograft as osteotomy gap filler was performed. The osteotomy gap was split into equal zones (Zone 1-5), and bone union was evaluated on anteroposterior radiographs based on the van Hemert classification at 1, 3, 6, and 12 months postoperatively. Postoperative complications including infection, lateral hinge fractures, and persistent pain was measured. The study and control group were matched for age, smoking status, diabetes mellitus, and osteotomy gap size.

RESULTS

Significantly greater bone union progression was observed in the PCL-TCP group than in the allograft group at 1 month (Zones 1-3), 3 months (Zones 1-4), 6 months (Zones 1-2, 4), and 12 months (Zones 2-3, 5) postoperatively (P < 0.05). No significant difference in complications rates was noted between the two groups at 1 year.

CONCLUSIONS

Bone union rates observed in patients who underwent MOWHTO with the PCL-TCP synthetic graft osteotomy gap filler were superior to those in the allograft group at 1 year postoperatively, with no significant difference in complication rates (postoperative infection, lateral hinge fractures, and persistent pain).

Comparative review of piezoelectric biomaterials approach for bone tissue engineering

Bone as a minerals' reservoir and rigid tissue of the body generating red and white blood cells supports various organs. Although the self-regeneration property of bone, it cannot regenerate spontaneously in severe damages and still remains as a challenging issue. Tissue engineering offers several techniques for regenerating damaged bones, where various biomaterials are examined to fabricate scaffolds for bone repair. Piezoelectric characteristic plays a crucial role in repairing and regenerating damaged bone by mimicking the bone niche behavior. Piezoelectric biomaterials show significant potential for bone tissue engineering. Herein we try to have a comparative review on piezoelectric and non-piezoelectric biomaterials used in bone tissue engineering, classified them, and discussed their effects on implanted cells and manufacturing techniques. Especially, Polyvinylidene fluoride (PVDF) and its composites are the most practically used piezoelectric biomaterials for bone regeneration. PVDF and its composites have been summarized and discussed to repair damaged bone tissues.

A Pilot Study of Seamless Regeneration of Bone and Cartilage in Knee Joint Regeneration Using Honeycomb TCP

The knee joint is a continuous structure of bone and cartilage tissue, making it difficult to regenerate using artificial biomaterials. In a previous study, we succeeded in developing honeycomb tricalcium phosphate (TCP), which has through-and-through holes and is able to provide the optimum microenvironment for hard tissue regeneration. We demonstrated that TCP with 300 μm pore diameters (300TCP) induced vigorous bone formation, and that TCP with 75 μm pore diameters (75TCP) induced cartilage formation. In the present study, we regenerated a knee joint defect using honeycomb TCP. 75TCP and 300TCP were loaded with transforming growth factor (TGF)-β alone or bone morphogenic protein (BMP)-2+TGF-β with or without Matrigel and transplanted into knee joint defect model rabbits. 75TCP showed no bone or cartilage tissue formation in any of the groups with TGF-β alone and BMP-2+TGF-β with/without Matrigel. However, for 300TCP and BMP-2+TGF-β with or without Matrigel, vigorous bone tissue formation was observed in the TCP holes, and cartilage tissue formation in the TCP surface layer was continuous with the existing cartilage. The cartilage area in the TCP surface was larger in the group without Matrigel (with BMP-2+TGF-β) than in the group with Matrigel (with BMP-2+TGF-β). Therefore, honeycomb TCP can induce the seamless regeneration of bone and cartilage in a knee joint.

TCP/PLGA composite scaffold loaded rapamycin in situ enhances lumbar fusion by regulating osteoblast and osteoclast activity

The purpose of this study was to develop a novel β-tricalcium phosphate (TCP)/poly (D,L-lactic-co-glycolic acid) (PLGA) composite scaffold loaded with rapamycin that can regulate the activity of osteoblasts and osteoclasts for lumbar fusion. The TCP/PLGA composite scaffold was fabricated by cryogenic three-dimensional printing techniques and then loaded with rapamycin in situ. The structural surface morphology of the composite scaffold was tested with scanning electron microscope. To evaluate the biocompatibility of the composite scaffold in vitro, bone marrow mesenchymal stem cells (BMSCs) were cultured on the TCP/PLGA composite scaffold slide and tested with Live/Dead Viability Kit. The effect of rapamycin on osteoclast and osteoblast was studied with staining and Western blotting. The in vitro results showed that the rapamycin-loaded TCP/PLGA composite scaffold showed good biocompatibility with BMSC and released rapamycin obviously promoted the osteoblast differentiation and mineralization. In vivo study, the TCP/PLGA composite scaffold loaded with rapamycin were implanted in lumbar fusion model and study with micro-computed tomography scanning, hematoxylin-eosin, Masson, and immune-histological staining, to evaluate the effect of rapamycin on bone fusion. The in vivo results demonstrated that rapamycin-loaded TCP/PLGA composite scaffold could enhance bone formation by regulating osteoblast and osteoclast activity, respectively. In this study, the TCP/PLGA composite scaffold loaded with rapamycin was confirmed to provide great compatibility and improved performance in lumbar fusion by regulating osteoblastic and osteoclastic activity and would be a promising composite biomaterial for bone tissue engineering.

Long-Term Effect of Honeycomb β-Tricalcium Phosphate on Zygomatic Bone Regeneration in Rats

In recent years, artificial bones with high biocompatibility have been developed for hard tissue reconstruction. However, current bone replacement methods are inadequate for large defects, causing infection, exposure, and damage. We have developed a new honeycomb β-tricalcium phosphate (TCP) material, which achieved good bone regeneration after implantation in a rat complete zygomatic bone defect. In this study, we further investigated the ability of honeycomb β- TCP for remodeling after bone regeneration as a long-term result. Bone morphogenic protein (BMP)-2-free honeycomb β-TCP (TCP group) and honeycomb β-TCP with BMP-2 (BMP group) were implanted in the zygomatic bone of rats. Micro-computed tomography was performed to track the zygomatic bone morphology, and specimens were histologically examined for osteogenesis and remodeling. In the TCP group, no bone formation was observed at 1 month, but it was observed at 6 months. Bone formation was observed in the BMP group at 1 month, and β-TCP absorption reproducing the zygomatic bone morphology was observed at 6 months. This honeycomb β-TCP with BMP-2 may provide appropriate remodeling that reproduces good bone formation in the early stage and good morphology in the long term, offering an alternative bone reconstruction material to vascularized bone grafts.

Geometrical Structure of Honeycomb TCP to Control Dental Pulp-Derived Cell Differentiation

Recently, dental pulp has been attracting attention as a promising source of multipotent mesenchymal stem cells (MSCs) for various clinical applications of regeneration fields. To date, we have succeeded in establishing rat dental pulp-derived cells showing the characteristics of odontoblasts under in vitro conditions. We named them Tooth matrix-forming, GFP rat-derived Cells (TGC). However, though TGC form massive dentin-like hard tissues under in vivo conditions, this does not lead to the induction of polar odontoblasts. Focusing on the importance of the geometrical structure of an artificial biomaterial to induce cell differentiation and hard tissue formation, we previously have succeeded in developing a new biomaterial, honeycomb tricalcium phosphate (TCP) scaffold with through-holes of various diameters. In this study, to induce polar odontoblasts, TGC were induced to form odontoblasts using honeycomb TCP that had various hole diameters (75, 300, and 500 μm) as a scaffold. The results showed that honeycomb TCP with 300-μm hole diameters (300TCP) differentiated TGC into polar odontoblasts that were DSP positive. Therefore, our study indicates that 300TCP is an appropriate artificial biomaterial for dentin regeneration.