Geometry Control of Source/Drain Electrodes in Organic Field-Effect Transistors by Electrohydrodynamic Inkjet Printing

Ultra-thick inkjet-printed quantum dots layer for full-color micro-LED displays

Micro-LEDs have promising development potential in display applications because of their outstanding performance. Achieving a full-color display based on micro-LEDs is one of the most important issues in commercial applications. In this paper, an effective method based on quantum dots and blue micro-LEDs was developed. Using an etching method, a thick black matrix was fabricated to reduce crosstalk and form a thick bank for quantum dots. Quantum dots were deposited in a thick black matrix using inkjet printing technology. With blue micro-LEDs, inkjet-printed quantum dot films can realize effective color conversion. The integrated blue micro-LEDs and red/green quantum dot films can achieve full-color displays without color filters, because the blue light leakage in the color conversion film can be reduced by the quantum dots themselves. The results suggest that inkjet-printed quantum dots are a promising way to achieve full-color micro-LED displays.

Inkjet-Printed Highly Conductive Poly(3,4-ethylenedioxythiophene): Poly(styrenesulfonate) Electrode for Organic Light-Emitting Diodes

Recently, inkjet printing technology has attracted much attention due to the advantages of drop-on-demand deposition, low-cost and large-area production for organic light-emitting diode (OLED) displays. However, there are still some problems in industrial production and practical application, such as the complexity of ink modulation, high-quality films with homogeneous morphology, and the re-dissolution phenomenon at interfaces. In this work, a printable poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS) ink is developed and obtains an adjustable viscosity. Finally, a patterned PEDOT:PSS electrode is fabricated by inkjet printing, and achieves a high conductivity of 1213 S/cm, a transparency of 86.8% and a uniform morphology without coffee-ring effect. Furthermore, the vacuum-evaporated and solution-processed OLEDs are fabricated based on this electrode and demonstrate a current efficiency of 61 cd/A, which is comparable to that of the indium tin oxide counterpart. This work confirms the feasibility of inkjet printing technology to prepare patterned electrodes and expects that it can be used to fabricate highly efficient optoelectronic devices.