1
|
Łukowski P, Horszczaruk E, Seul C, Strzałkowski J. Mechanical Strength and Thermal Properties of Cement Concrete Containing Waste Materials as Substitutes for Fine Aggregate. MATERIALS (BASEL, SWITZERLAND) 2022; 15:8832. [PMID: 36556637 PMCID: PMC9786012 DOI: 10.3390/ma15248832] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 11/10/2022] [Revised: 11/30/2022] [Accepted: 12/07/2022] [Indexed: 06/17/2023]
Abstract
The increasing volume of waste and the requirements of sustainable development are the reasons for the research on new waste management concepts. The research results presented in this paper show the effect of recycled aggregate on the selected properties of cement concrete. The aggregates obtained from three types of wastes are tested: recycled concrete paving, crushed ceramic bricks, and burnt sewage sludges. The recycled aggregates replaced 25% and 50% of the volume of the fine aggregate. The tested aggregates worsen the concrete mixes' consistency and decrease, to some extent, the compressive strength of the concrete. However, the tensile splitting strength of the concrete with recycled aggregates is similar to that of the reference concrete. Using recycled aggregates worsens the tightness of the concrete, which manifests itself by increasing water penetration depth. The thermal properties of concrete are slightly affected by the type and content of the recycled aggregate. Considering the expected improvement in recycled aggregate processing, they can be an alternative to natural aggregates. Using recycled aggregates in cement concrete requires extensive studies to search for ways to increase their possible content without worsening concrete performance.
Collapse
Affiliation(s)
- Paweł Łukowski
- Department of Building Materials Engineering, Faculty of Civil Engineering, Warsaw University of Technology, 00-637 Warsaw, Poland
| | - Elżbieta Horszczaruk
- Department of Civil and Environmental Engineering, West Pomeranian University of Technology in Szczecin, al. Piastów 50a, 70-311 Szczecin, Poland
| | - Cyprian Seul
- Department of Civil and Environmental Engineering, West Pomeranian University of Technology in Szczecin, al. Piastów 50a, 70-311 Szczecin, Poland
| | - Jarosław Strzałkowski
- Department of Civil and Environmental Engineering, West Pomeranian University of Technology in Szczecin, al. Piastów 50a, 70-311 Szczecin, Poland
| |
Collapse
|
2
|
Understanding Sustainability of Construction Products: Answers from Investors, Contractors, and Sellers of Building Materials. SUSTAINABILITY 2022. [DOI: 10.3390/su14053042] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/01/2023]
Abstract
Preventing environmental degradation and climate changes are some of the primary challenges of our civilization. Changes to the construction sector, which consumes vast amounts of raw materials, emits significant amounts of greenhouse gas and significant amounts of waste, are very important to reduce emissions and stop negative environmental changes. Regardless of the type of goal, an essential element to achieve it is understanding the purpose and tools necessary to implement appropriate and efficient solutions. This paper presents the survey results on understanding issues related to assessing construction products, including their environmental impact. The survey was conducted among professional groups related to construction, i.e., 181 investors, 522 contractors, and 116 sellers of construction products from various regions of Poland. Questions concerning thermal insulation materials and the external thermal insulation composite system (ETICS), the most widely used solution in the EU for the improvement of thermal performance of buildings, were asked. The obtained results indicate that the knowledge of the basic requirements of construction works under the Construction Products Regulation (CPR) is not too high (the share of correct answers was respectively 33.5%, 23.2%, and 16.2% in contractors, sellers, and investors groups). Similarly, the awareness of the tested, related to the environmental burden in terms of GWP of insulation materials and components of ETICS, should be assessed (49.7% of investors, 57.1% sellers of construction products, and 76.4% contractors indicated the thermal insulation material as the ETICS component with the highest environmental impact in terms of GWP). The obtained research results indicate the need for further education for evaluating construction products and sustainability.
Collapse
|
3
|
Minimizing Macro-Level Uncertainties for Quality Assurance in Reverse Logistics Supply Chains of Demolition Waste. SUSTAINABILITY 2021. [DOI: 10.3390/su132313069] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 02/05/2023]
Abstract
In light of the increasing detrimental effects on sustainability, the reverse logistics supply chain (RLSC) has emerged as one of the remedies in the construction industry, whereby the bulk of demolition waste (DW) is returned into the production cycle. Quality assurance (QA) plays an important role in RLSCs, which needs an information-rich environment enriched with external stakeholders’ influence strategies. However, due to ineffective external stakeholders’ influence, useful information is not available, making macro-level uncertainties for QA. Given this, the current study aimed to identify the macro-level uncertainties for QA in the RLSC of DW. The study used a qualitative approach involving 21 semi-structured interviews representing five external stakeholder categories. The study found the regulatory uncertainties are the root causes that propagate through incentivizing and contractual uncertainties to influence QA in the RLSC. The external stakeholders could employ measures such as ‘reforming regulatory instruments’, ‘employing effective incentivizing schemes’ and ‘active involvement of forward supply chain actors’ to minimize uncertainties at their source. The external and internal stakeholders can use these findings as a roadmap to determine suitable measures to overcome macro-level uncertainties in the RLSC. Furthermore, the study paved an avenue to integrate stakeholder theory and organizational information processing theory (OIPT) in future research.
Collapse
|
4
|
Durability Assessment and Microstructure of High-Strength Performance Bricks Produced from PET Waste and Foundry Sand. MATERIALS 2021; 14:ma14195635. [PMID: 34640032 PMCID: PMC8509797 DOI: 10.3390/ma14195635] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/11/2021] [Revised: 09/13/2021] [Accepted: 09/16/2021] [Indexed: 11/19/2022]
Abstract
Fired clay brickwork in buildings is prone to cracks and deterioration upon exposure to long-time acidic contamination and water absorption, hence decreasing the bearing capacity of masonry walls. As its contribution toward resolving this challenge, this study assessed the durability and morphological characteristics of high-strength performance bricks produced from a mixture of PET waste (PW) and foundry sand (FS). The PET waste bricks (PWBs) were produced through different proportioning (PW: FS) of 20%, 30%, and 40% of the dry mass of FS. The PWBs produced were tested for durability and compressive and tensile strengths and compared to fired clay bricks to evaluate their load-bearing capacity under compression and tension. Furthermore, scanning electron microscopy (SEM) tests were employed to analyze the morphological structure of the bricks. The test results revealed that the PWBs recorded an appreciable strength of 1.5–2 times that of fired clay bricks, and lower water absorption whilst retaining their ultimate strengths after complete immersion in water and acidic concentrations. The morphology of PWB possessed greater intercluster bonds on the surface compared to clay bricks. The findings demonstrate a reasonable methodological approach toward the production of masonry bricks using a mixture of PET waste and spent foundry sands.
Collapse
|
5
|
Core Elements towards Circularity: Evidence from the European Countries. SUSTAINABILITY 2021. [DOI: 10.3390/su13168742] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
Abstract
In this paper, the authors identified key elements important for circularity. The primary goal of circularity is to eliminate waste and prove the constant use of resources. In the paper, we classified studies according to circular approaches and stated which of them get the highest attention. Further, we identified the principal elements, grouped them into four categories important for circularity, and presented scientific works dedicated to each of the above-mentioned categories. Further on, several core elements from the first category were investigated, aiming to connect different waste streams and provide a regression model. Finally, the methodological part reviewed the correlation between various types of waste and their recycling and selected suitable ones for developing a new panel regression model. The empirical research was delivered for the 27 European Union countries during the period between 2000 and 2019. We indicate that the recycling rate of municipal waste impacts the increase of recycling biowaste the same calendar year. The increase of recycling of municipal waste by one per cent means the increase of the recycling of biowaste by 0.6 per cent.
Collapse
|
6
|
Drivers and Barriers for a Circular Economy (CE) Implementation in Poland—A Case Study of Raw Materials Recovery Sector. ENERGIES 2021. [DOI: 10.3390/en14082219] [Citation(s) in RCA: 14] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
Mobilizing industry and transforming industrial sectors to a circular economy (CE) is one of the key areas of activities in the European Green Deal (EGD)—the newest strategy of economic growth in European Union (EU). In the CE, the raw materials that can be recovered from various waste streams play a key role, therefore, recommendations for their management were developed, both at the European and national level. In Poland, the raw material recovery sector is one of the strategic sectors (key industries) described in several documents determining the further directions of economic growth in the country. This paper presents the revision of these documents and guidelines for the implementation of the CE in the raw material recovery sector. The scope of the paper also includes a description of the current state of the raw materials recovery sector and its return, supported by the analysis of drivers and barriers in its further development. In previous years, a dynamic development of the recovery industry was observed, followed by formation of new companies (dominated by medium-sized companies comprising ~50% of entities in the sector) and increasing amount of people employed (~70,700 people). A growing level of processing of secondary raw materials with the use of more and more innovative technologies has been observed, which could contribute to the improvement of the level of innovation of the national economy. There also some barriers, such as the lack of sufficiently developed industrial symbiosis (IS) and long-term support for the implementation of recovery technologies. The growing ecological awareness of society and enterprises themselves, as well as the growing belief in the importance of resource recovery for environmental protection, suggest the possibility of subsequent development of the raw materials recovery sector. Further actions in this field will be taken to strengthen the implementation of the CE in the country.
Collapse
|
7
|
Quantifying Environmental Burdens of Plasters Based on Natural vs. Flue Gas Desulfurization (FGD) Gypsum. SUSTAINABILITY 2021. [DOI: 10.3390/su13084298] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
The ongoing global climate change and the associated environmental degradation pose a threat to Europe and the rest of the world. Raw materials and energy are required to produce building materials, which are used for construction purposes. Resulting buildings and structures generate waste during construction, operation, and demolition, and they emit potentially harmful substances. Thus, the key to achieving climate goals is to support low-emission materials and technologies in the construction sector, significantly impacting the environment. In the European Union, building materials are not yet subject to mandatory sustainability assessment during the assessment and verification of constancy of performance (AVCP). Objective evaluation of construction materials’ environmental impact requires it to be carried out based on production data on an industrial scale. This article presents the environmental impact of premixed gypsum-based plasters, commonly used in modern construction. Nine environmental indicators (global warming potential (GWP), depletion potential of the stratospheric ozone layer (ODP), acidification potential (AP), eutrophication potential (EP), formation potential of tropospheric ozone (POCP), abiotic depletion potential (ADP)-elements, ADP-fossil fuels, renewable primary energy resources (PERT), and nonrenewable primary energy resources (PERNT)) of premixed gypsum plasters based on natural and flue gas desulfurization (FGD) gypsum were estimated and discussed. Knowledge of the construction products’ environmental impact is fundamental for creating reliable databases. AVCP of construction materials in the future will use the data collected during the voluntary environmental impact evaluation.
Collapse
|
8
|
Understanding of Construction Product Assessment Issues and Sustainability among Investors, Architects, Contractors, and Sellers of Construction Products in Poland. ENERGIES 2021. [DOI: 10.3390/en14071941] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
The building sector is one of the most critical branches of the economy influencing global warming today. Following the European Union’s Construction Products Regulation (CPR), the sustainable use of natural resources in construction is one of the seven basic buildings’ requirements. However, due to the lack of provisions in this regard, construction products are not yet subject to mandatory assessment and verification of the constancy of performance in this area. The paper presents the research results with the participation of 842 respondents who are investors, architects, contractors, and sellers of building materials. The analysis of their perceptions of issues related to the term sustainable development and knowledge of selected documents functioning in construction is presented. The share of people who correctly assigned the term sustainable development to equal treatment of environmental protection, economic development, and social development ranged between 52.5% and 65.7%. Knowledge of people associated with construction about the role of the declaration of performance (DoP) of construction products is high (from 73.9% to 99.4% correct answers). For Environmental Product Declaration (EPD), lower knowledge of this document’s role was noted, from 24.1% to 56.5% of correct answers. The obtained results indicate the need for further education.
Collapse
|
9
|
Zirconia-Alumina Composites Obtained by Centrifugal Slip Casting as Attractive Sustainable Material for Application in Construction. MATERIALS 2021; 14:ma14020250. [PMID: 33419071 PMCID: PMC7825426 DOI: 10.3390/ma14020250] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/07/2020] [Revised: 12/29/2020] [Accepted: 12/31/2020] [Indexed: 12/20/2022]
Abstract
This paper focuses on the possibility of adapting the centrifugal slip casting method to obtain zirconia-alumina composite materials in the form of finished tube-shaped products. These types of products, due to their unique properties, can be utilised, for example, in the transport of aggressive substances, even in extreme temperatures or corrosive conditions. The study reports on the two series of zirconia-alumina composites differing in the content of ZrO2-2.5 and 25 vol%. The fabricated and sintered materials were characterised using scanning electron microscopy (SEM), X-ray diffraction (XRD) and stereological analysis. Moreover, a life cycle assessment (LCA) was provided in accordance with the requirements of the ISO 14044 and EN 15805 standards. The obtained data clearly show that the centrifugal slip casting method allows obtaining samples with high density and extremely uniform distribution of the ZrO2 phase in the alumina matrix. The stereological analysis results proved also that the addition of ZrO2 is effective in reducing the growth of Al2O3 grains during the sintering process. The phase analysis carried out by means of XRD showed that during the sintering process, in the case of composites with a lower ZrO2 content (2.5 vol%), the monoclinic to tetragonal transformation of ZrO2 was total, while for samples containing 25 vol% ZrO2, the monoclinic phase remained in a small amount in the final product.
Collapse
|