Modified Activation Process for Supercapacitor Electrode Materials from African Maize Cob

Activated Carbon Electrodes for Supercapacitors from Purple Corncob (Zea maysL.)

Activated carbon-based supercapacitor electrodes synthesized from biomass or waste-derived biomass have recently attracted considerable attention because of their low cost, natural abundance, and power delivery performance. In this work, purple-corncob-based active carbons are prepared by KOH activation and subsequently evaluated as a composite electrode for supercapacitors using either an acidic or an alkali solution as the electrolyte. The synthesis of the material involves mixing the purple corncob powder with different concentrations of KOH (in the range of 5% to 30%) and a thermal treatment at 700 °C under an inert atmosphere. Physicochemical characterizations were performed using scanning electron microscopy, Raman spectroscopy, N2 physisorption analysis, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy, while the electrochemical characteristics were determined using cyclic voltammetry, a galvanostatic charge/discharge curve, and electrochemical impedance techniques measured in a three- and two-electrode system. Composite electrodes activated with 10% KOH had a specific surface area of 728 m2 g-1, and high capacitances of 195 F g-1 at 0.5 A g-1 in 1 mol L-1 H2SO4 and 116 F g-1 at 0.5 A g-1 in 1 mol L-1 KOH were obtained. It also presented a 76% capacitance retention after 50 000 cycles. These properties depend significantly on the microporous area and micropore volume characteristics of the activated carbon. Overall, our results indicate that purple corncob has an interesting prospect as a carbon precursor material for supercapacitor electrodes.

The relative dominance of surface oxygen content over pore properties in controlling adsorption and retrograde behavior of gaseous toluene over microporous carbon

The adsorption potential of activated carbon (AC) derived from macadamia nut shells (product code of Procarb-900: namely, AC-P) has been investigated using gaseous toluene as the target pollutant. The powder AC-P with high-microporosity (96%) and oxygen content (5.62%) exhibited very high adsorption capacity (214 mg·g-1) and partition coefficient (PC: 25 mol·kg-1·Pa-1) against 100 ppm (10 Pa) toluene at 99% breakthrough levels (1 atm dry N2). The factors governing toluene adsorption were explored with respect to the key variables such as surface functional groups, pore size distribution, sorbent bed mass (50, 100, and 150 mg), and particle size (i.e., 0.212-0.6 mm (powder AC: PAC)) vs. 0.6-2.36 mm (granular AC: GAC)). Accordingly, the adsorption process was physical, mainly due to the non-polar interactions (i.e., π-π interactions) between the adsorbent and adsorbate molecules. The high affinity of AC-P at low breakthrough levels was obtained through a combination of smaller particle size (PAC) and larger adsorbent mass (i.e., 150 mg) with the appearance of a very pronounced retrograde phenomenon (e.g., at < 1% breakthrough level). As such, toluene adsorption appeared to be affected more sensitively by particle size and adsorbent mass (especially at low breakthrough levels) than by high microporosity. Most importantly, the oxygen content of AC emerges as one of the key factors governing the maximum capacity, as the changes in pore volume are not crucial to explain the observed adsorption patterns of toluene.

The impact of physicochemical features of carbon electrodes on the capacitive performance of supercapacitors: a machine learning approach

Hybrid electric vehicles and portable electronic systems use supercapacitors for energy storage owing to their fast charging/discharging rates, long life cycle, and low maintenance. Specific capacitance is regarded as one of the most important performance-related characteristics of a supercapacitor's electrode. In the current study, Machine Learning (ML) algorithms were used to determine the impact of various physicochemical properties of carbon-based materials on the capacitive performance of electric double-layer capacitors. Published experimental datasets from 147 references (4899 data entries) were extracted and then used to train and test the ML models, to determine the relative importance of electrode material features on specific capacitance. These features include current density, pore volume, pore size, presence of defects, potential window, specific surface area, oxygen, and nitrogen content of the carbon-based electrode material. Additionally, categorical variables as the testing method, electrolyte, and carbon structure of the electrodes are considered as well. Among five applied regression models, an extreme gradient boosting model was found to best correlate those features with the capacitive performance, highlighting that the specific surface area, the presence of nitrogen doping, and the potential window are the most significant descriptors for the specific capacitance. These findings are summarized in a modular and open-source application for estimating the capacitance of supercapacitors given, as only inputs, the features of their carbon-based electrodes, the electrolyte and testing method. In perspective, this work introduces a new wide dataset of carbon electrodes for supercapacitors extracted from the experimental literature, also giving an instance of how electrochemical technology can benefit from ML models.

Phyllanthus emblica Seed-Derived Hierarchically Porous Carbon Materials for High-Performance Supercapacitor Applications

The electrical double-layer supercapacitance performance of the nanoporous carbons prepared from the Phyllanthus emblica (Amala) seed by chemical activation using the potassium hydroxide (KOH) activator is reported. KOH activation was carried out at different temperatures (700-1000 °C) under nitrogen gas atmosphere, and in a three-electrode cell set-up the electrochemical measurements were performed in an aqueous 1 M sulfuric acid (H₂SO₄) solution. Because of the hierarchical pore structures with well-defined micro- and mesopores, Phyllanthus emblica seed-derived carbon materials exhibit high specific surface areas in the range of 1360 to 1946 m² g^-1, and the total pore volumes range from 0.664 to 1.328 cm³ g^-1. The sample with the best surface area performed admirably as the supercapacitor electrode-material, achieving a high specific capacitance of 272 F g^-1 at 1 A g^-1. Furthermore, it sustained 60% capacitance at a high current density of 50 A g^-1, followed by a remarkably long cycle-life of 98% after 10,000 subsequent charging/discharging cycles, demonstrating the electrode's excellent rate-capability. These results show that the Phyllanthus emblica seed would have significant possibilities as a sustainable carbon-source for the preparing high-surface-area activated-carbons desired in high-energy-storage supercapacitors.

Hierarchical Activated Carbon-MnO2 Composite for Wide Potential Window Asymmetric Supercapacitor Devices in Organic Electrolyte

The consumption of electrical energy grows alongside the development of global industry. Generating energy storage has become the primary focus of current research, examining supercapacitors with high power density. The primary raw material used in supercapacitor electrodes is activated carbon (AC). To improve the performance of activated carbon, we used manganese dioxide (MnO₂), which has a theoretical capacitance of up to 1370 Fg^-1. The composite-based activated carbon with a different mass of 0-20% MnO₂ was successfully introduced as the positive electrode. The asymmetric cell supercapacitors based on activated carbon as the anode delivered an excellent gravimetric capacitance, energy density, and power density of 84.28 Fg^-1, 14.88 Wh.kg^-1, and 96.68 W.kg^-1, respectively, at 1 M Et₄NBF₄, maintaining 88.88% after 1000 test cycles.

Sustainable Materials from Fish Industry Waste for Electrochemical Energy Systems

Fish industry waste is attracting growing interest for the production of environmentally friendly materials for several different applications, due to the potential for reduced environmental impact and increased socioeconomic benefits. Recently, the application of fish industry waste for the synthesis of value-added materials and energy storage systems represents a feasible route to strengthen the overall sustainability of energy storage product lines. This review focused on an in-depth outlook on the advances in fish byproduct-derived materials for energy storage devices, including lithium-ion batteries (LIBs), sodium-ion (NIBs) batteries, lithium-sulfur batteries (LSBs), supercapacitors and protein batteries. For each of these, the latest applications were presented together with approaches to improve the electrochemical performance of the obtained materials. By analyzing the recent literature on this topic, this review aimed to contribute to further advances in the sustainability of energy storage devices.

Flax-Derived Carbon: A Highly Durable Electrode Material for Electrochemical Double-Layer Supercapacitors

Owing to their low cost, good performance, and high lifetime stability, activated carbons (ACs) with a large surface area rank among the most popular materials deployed in commercially available electrochemical double-layer (EDLC) capacitors. Here, we report a simple two-step synthetic procedure for the preparation of activated carbon from natural flax. Such ACs possess a very high specific surface area (1649 m² g^–1) accompanied by a microporous structure with the size of pores below 2 nm. These features are behind the extraordinary electrochemical performance of flax-derived ACs in terms of their high values of specific capacitance (500 F g^–1 at a current density of 0.25 A g^–1 in the three-electrode setup and 189 F g^–1 at a current density of 0.5 A g^–1 in two-electrode setup.), high-rate stability, and outstanding lifetime capability (85% retention after 150,000 charging/discharging cycles recorded at the high current density of 5 A g^–1). These findings demonstrate that flax-based ACs have more than competitive potential compared to standard and commercially available activated carbons.