Electrochemical Detection of Endosulfan Using an AONP-PANI-SWCNT Modified Glassy Carbon Electrode

Two-dimensional layered MoSe2/graphene oxide (GO) nanohybrid coupled with the specific immune-recognition element for rapid detection of endosulfan

Endosulfan (En) is an organochlorine biocide (OCB), that ends up in the environment due to the enzymatic and microsomal activity even though it is not accumulated in living tissue. Endosulfan acts as an organic micro-pollutant which disrupts land as well as aquatic ecosystem. In the present study, we chemically modified endosulfan and conjugated it with a carrier protein to produce an immune response. The generated antibodies were tested for specificity against En, and characterized before further use. Transition Metal Chalcogenides (TMC) showed excellent optoelectrical potential due to its direct bandgap and distinct physical as well as chemical characteristics. Herein, we synthesized a novel nanohybrid using MoSe2 in combination with graphene oxide (GO) and characterized thoroughly. This was similar to graphene-based metal chalcogenides which were further used in this study to fabricate biosensor for the sensitive detection of En. The in-house developed antibodies (En-Ab) were coupled with the nanohybrid to make MoSe2/GO/En-Ab electrode. Fabricated electrode was tested for electrochemical parameters using differential pulse voltammetry (DPV). Working efficiency of the fabricated electrode i.e., limit of detection (LOD), was found to be 7.45 ppt. In conclusion, we hypothesized that the synthesized TMC nanohybrids could be employed for biosensing of endosulfan, and can likely be developed to test field samples.

Nano-assembly of multiwalled carbon nanotubes for sensitive voltammetric responses for the determination of residual levels of endosulfan

Endosulfan (ES) is an extensively utilized agricultural pesticide in developing countries, despite its life-threatening toxic effects. In this study, we propose a sensitive detection method against endosulfan using multiwalled carbon nanotubes (MWCNT). Herein, we have conjugated endosulfan with bovine serum albumin (BSA) via zero-length conjugation method and successfully confirmed with various biophysical techniques. Endosulfan antibodies (ES-Ab) were raised in-house, fabricated on electrodes coupled with MWCNT, and optimized to achieve maximum peak current by varying the parameters such as MWCNT and antibody concentration, scan rate, temperature, pH, and response time using voltammetry. Cyclic voltammetry (CV), differential pulse voltammetry (DPV), and impedance spectroscopies (IS) were performed for electrochemical analysis. The fabricated immunosensor was also evaluated for its cross reactivity with isodrin, chlorpyrifos, and monocrotophos. The limit of detection for ES was found to be 0.184 ppt in standard buffer (range 0.001 ppt-100 ppb). Additionally, spiked ES in water, animal feed, root, and leaf extract samples were also analyzed and validated by HPLC. To summarize, the fabricated electrode can be used for successful detection of endosulfan in the agricultural sector to elude the lethal effect at large.

Recent advances in electrochemical-based sensors amplified with carbon-based nanomaterials (CNMs) for sensing pharmaceutical and food pollutants

Foodborne-related infections due to additives and pollutants pose a considerable task for food processing enterprises. Therefore, the competent, cost-effective, and quick investigation of nutrition additives and contaminants is essential to reduce the threat of public fitness problems. The electrochemical sensor (ECS) shows facile and potent analytical approaches desirable for food protection and quality inspection over traditional methods. The consequence of a broad display of nanomaterials has paved the path for their relevance in designing high-performance ECSs appliances for medical diagnostics and conditions and food protection. This review article has discussed the importance of electrochemical-based sensors amplified with carbon-based nanomaterials (CNMs). Initially, we have demonstrated the types of pharmaceutical and food/agriculture pollutants (such as pesticides, heavy metals, antibiotics and other medical drugs) present in water. Subsequently, we have compiled the information on electrochemical techniques (such as voltammetric and electrochemical impedance spectroscopy) and their crucial parameters for detecting pollutants. Further, the applications of CNMs for sensing pharmaceutical and food pollutants have been demonstrated in detail. Finally, the topic has been concluded with existing challenges and future prospects.

Polymer based nanocomposites: A strategic tool for detection of toxic pollutants in environmental matrices

A large fraction of population is suffering from waterborne diseases due to the contaminated drinking water. Both anthropogenic and natural sources are responsible for water contamination. Revolution in industrial and agriculture sectors along with a huge increase in human population has brought more amount of wastes like heavy metals, pesticides and antibiotics. These toxins are very harmful for human health, therefore, it is necessary to sense their presence in environment. Conventional strategies face various problems in detection and quantification of these pollutants such as expensive equipment and requirement of high maintenance with limited portability. Recently, nanostructured devices have been developed to detect environmental pollutants. Polymeric nanocomposites have been found robust, cost effective, highly efficient and accurate for sensing various environmental pollutants and this is due to their porous framework, multi-functionalities, redox properties, great conductivity, catalytic features, facile operation at room temperature and large surface area. Synergistic effects between polymeric matrix and nanomaterials are responsible for improved sensing features and environmental adaptability. This review focuses on the recent advancement in polymeric nanocomposites for sensing heavy metals, pesticides and antibiotics. The advantages, disadvantages, operating conditions and future perspectives of polymeric nanocomposites for sensing toxic pollutants have also been discussed.

Electrochemical Detection of Ascorbic Acid in Oranges at MWCNT-AONP Nanocomposite Fabricated Electrode

Ascorbic acid (AA) is an essential vitamin in the body, influencing collagen formation, as well as norepinephrine, folic acids, tryptophan, tyrosine, lysine, and neuronal hormone metabolism. This work reports on electrochemical detection of ascorbic acid (AA) in oranges using screen-print carbon electrodes (SPCEs) fabricated with multi-walled carbon nanotube- antimony oxide nanoparticle (MWCNT-AONP) nanocomposite. The nanocomposite-modified electrode displayed enhanced electron transfer and a better electrocatalytic reaction towards AA compared to other fabricated electrodes. The current response at the nanocomposite-modified electrode was four times bigger than the bare electrode. The sensitivity and limit of detection (LOD) at the nanocomposite modified electrode was 0.3663 [AA]/µM and 140 nM, respectively, with linearity from 0.16–0.640 μM and regression value R² = 0.985, using square wave voltammetry (SWV) for AA detection. Two well-separated oxidation peaks were observed in a mixed system containing AA and serotonin (5-HT); and the sensitivity and LOD were 0.0224 [AA]/µA, and 5.85 µΜ, respectively, with a concentration range from 23 to 100 µM (R² = 0.9969) for AA detection. The proposed sensor outperformed other AA sensors reported in the literature. The fabricated electrode showed great applicability with excellent recoveries ranging from 99 to 107 %, with a mean relative standard deviation (RSD) value of 3.52 % (n = 3) towards detecting AA in fresh oranges.

Electrocatalysis of Endosulfan Based on Fe3O4: An Experimental and Computational Approach

The present work reports the electrocatalytic oxidation of the organochlorine pesticide endosulfan (EDS) using iron oxide (Fe₃O₄) nanoparticles synthesized from Callistemon viminalis leaf extracts. As a sensor for EDS, Fe₃O₄ was combined with functionalized multiwalled carbon nanotubes (f-MWCNTs) on a glassy carbon electrode (GCE). Cyclic voltammetry, electrochemical impedance spectroscopy, and the differential pulse voltammetry experiment were conducted to investigate the electrochemistry of EDS on the GCE/f-MWCNT/Fe₃O₄ sensor. Based on optimized experimental conditions, the reports of analytical parameters show a limit of detection of 3.3 μM and an effective sensitivity of 0.06464 μA/μM over a range of concentrations from 0.1 to 20 μM. With the proposed method, we were able to demonstrate recoveries between 94 and 110% for EDS determinations in vegetables. Further, a series of computational modeling studies were carried out to better understand the EDS surface adsorption phenomenon on the GCE/f-MWCNT/Fe₃O₄ sensor. The highest occupied molecular orbital-lowest unoccupied molecular orbital (HOMO-LUMO) energy gap (-5.18 eV) computed by density functional theory (DFT) supports the layer-by-layer electrode modification strategy's charge transfer and stability. Finally, transition state modeling was able to predict and confirm the mechanism of endosulfan oxidation.

A Review of Nanocomposite-Modified Electrochemical Sensors for Water Quality Monitoring

Electrochemical sensors play a significant role in detecting chemical ions, molecules, and pathogens in water and other applications. These sensors are sensitive, portable, fast, inexpensive, and suitable for online and in-situ measurements compared to other methods. They can provide the detection for any compound that can undergo certain transformations within a potential window. It enables applications in multiple ion detection, mainly since these sensors are primarily non-specific. In this paper, we provide a survey of electrochemical sensors for the detection of water contaminants, i.e., pesticides, nitrate, nitrite, phosphorus, water hardeners, disinfectant, and other emergent contaminants (phenol, estrogen, gallic acid etc.). We focus on the influence of surface modification of the working electrodes by carbon nanomaterials, metallic nanostructures, imprinted polymers and evaluate the corresponding sensing performance. Especially for pesticides, which are challenging and need special care, we highlight biosensors, such as enzymatic sensors, immunobiosensor, aptasensors, and biomimetic sensors. We discuss the sensors' overall performance, especially concerning real-sample performance and the capability for actual field application.

Synthesis, antimicrobial, anti-proliferative activities, molecular docking and DFT studies of novel pyrazolo[5,1-c][1, 2, 4]triazine-3-carboxamide derivatives

In this investigation, we studied the reactivity of 5-aminouracil (1) with ethyl cyanoacetate (2) utilizing microwave irradiation to afford the corresponding 2-cyano-N-(2,4-dioxo-1,2,3,4-tetrahydropyrimidin-5-yl)acetamide (3) in excellent yield. The electrophilic azo-coupling reaction of acetamide 3 with aromatic diazonium salts afforded the corresponding hydrazone derivatives 4a-d. The Michael addition cyclization of hydrazone in pyridine to give pyrazolo[5,1-c][1, 2, 4]triazine-3-carboxamide 5a-d derivatives. The obtained compounds were elucidated against antimicrobial activity and antitumor activity breast cancer cells (MCF-7) and liver cancer cells (HepG2) utilized MTT assay. Compounds 5b, 5c and 5d revealed more inhibitory influence on MCF7 and HepG2 growth than the reference drug doxorubicin (Dox) after 48 h incubation. Furthermore, molecular docking studies were carried out on one of the most effective compound 4-amino-N-(2,4-dioxo-1,2,3,4-tetrahydropyrimidin-5-yl)-7-(4-fluorophenyl) pyrazole [5,1-c][1, 2, 4]triazine-3-carboxamide (5c) (TFC) with (PDB: 3t88), (PDB: 2wje) , (PDB: 4ynt), (PDB: 1tgh), (PDB: 4hdq) and (PDB: 3pxe) which attached with different proteins with different energies and shortage bond distance. Also; the comprehensive theoretical and experimental mechanical studies of compound TFC and TMC were compatible with FTIR and ¹H NMR spectral data. The optimized molecular structure of TFC with FTIR was examined via DFT/ B3LYP/6-31G (d) level.Communicated by Ramaswamy H. Sarma.