1
|
Liu Y, Dou Q. Improving the compatibility and toughness of sustainable polylactide/poly(butylene adipate-co-terephthalate) blends by incorporation of peroxide and diacrylate. Int J Biol Macromol 2024; 259:129355. [PMID: 38218295 DOI: 10.1016/j.ijbiomac.2024.129355] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/19/2023] [Revised: 12/27/2023] [Accepted: 01/07/2024] [Indexed: 01/15/2024]
Abstract
Polylactide/poly(butylene adipate-co-terephthalate) (PLA/PBAT) blends were compatibilized using dicumyl peroxide (DCP) and poly(ethylene glycol) 600 diacrylate (PEG600DA) through a one-step melt-blending process. The compatibility and performance of these blends were subsequently characterized. The results showed that grafts formed "in situ" effectively improved the compatibility and interfacial adhesion between PLA and PBAT phases. Melt viscosity and elasticity of both the PLA/PBAT/DCP and PLA/PBAT/DCP/PEG600DA blends evinced significant increases. Compared to PLA alone, both cold and melt crystallization abilities of the PLA/PBAT/DCP/PEG600DA blends were enhanced, with crystallinities increasing by 5 % - 10 %. Furthermore, the thermal stability, as well as hydrophobicity and oleophobicity of the compatibilized blends improved. In comparison with PLA, the elongation at break and notched impact strength for the PLA/PBAT/DCP/PEG600DA (60/40/0.1/4) blend achieved increases of 290 % and 44.23 kJ/m2, corresponding to improvements of 279 % and 1457 %, respectively. The toughening effect was substantially influenced by the ductile matrix (either a co-continuous phase or a flexible PBAT matrix) in addition to the strong interfacial adhesion and fine phase domain. These eco-friendly blends exhibit considerable potential for packaging articles and 3D printing products owing to their excellent mechanical properties and enhanced melt rheology.
Collapse
Affiliation(s)
- Yuanyuan Liu
- College of Materials Science and Engineering, Nanjing Tech University, Nanjing 211816, PR China
| | - Qiang Dou
- College of Materials Science and Engineering, Nanjing Tech University, Nanjing 211816, PR China.
| |
Collapse
|
2
|
Shahdan D, Rosli NA, Chen RS, Ahmad S, Gan S. Strategies for strengthening toughened poly(lactic acid) blend via natural reinforcement with enhanced biodegradability: A review. Int J Biol Macromol 2023; 251:126214. [PMID: 37572810 DOI: 10.1016/j.ijbiomac.2023.126214] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/14/2023] [Revised: 07/06/2023] [Accepted: 08/05/2023] [Indexed: 08/14/2023]
Abstract
The growing popularity of poly(lactic acid) (PLA) can be attributed to its favorable attributes, such as excellent compostability and robust mechanical properties. Two notable limitations of PLA are its high brittleness and slow biodegradation rate. Both of blending and copolymerization strategies work well to improve PLA's toughness while sacrificing the good tensile strength and modulus properties of PLA. One of the most effective and economical approaches to address this challenge is to incorporate natural reinforcing agents into the toughened PLA system, thereby simultaneously promoting the biodegradation rate of PLA. Nevertheless, the enhancement of tensile strength and modulus is accompanied by a notable decrease in elongation. Therefore, this review provides comprehensive information on the literature works related to the tensile strength, modulus, elongation at break and impact strength of the toughened PLA and its natural fiber reinforced composites. The impact of natural reinforcing agent on the tensile fracture mechanism as well as the synergistic effect on strengthening and toughening performance will be discussed. This review also focuses on the factors boosting the biodegradability of toughened PLA blend by using natural reinforcing fiber. Review presents potential future insights into the development of biodegradable and balanced strengthened-toughened PLA based advanced materials.
Collapse
Affiliation(s)
- Dalila Shahdan
- Department of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan Malaysia (UKM), 43600 Bangi, Selangor, Malaysia
| | - Noor Afizah Rosli
- Department of Chemical Sciences, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia..
| | - Ruey Shan Chen
- Department of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan Malaysia (UKM), 43600 Bangi, Selangor, Malaysia.
| | - Sahrim Ahmad
- Department of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan Malaysia (UKM), 43600 Bangi, Selangor, Malaysia
| | - Sinyee Gan
- Malaysian Palm Oil Board, 6 Persiaran Institusi, Bandar Baru Bangi, 43000 Kajang, Selangor, Malaysia
| |
Collapse
|
3
|
Zena Y, Periyasamy S, Tesfaye M, Tumsa Z, Jayakumar M, Mohamed BA, Asaithambi P, Aminabhavi TM. Essential characteristics improvement of metallic nanoparticles loaded carbohydrate polymeric films - A review. Int J Biol Macromol 2023; 242:124803. [PMID: 37182627 DOI: 10.1016/j.ijbiomac.2023.124803] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/18/2022] [Revised: 04/24/2023] [Accepted: 05/06/2023] [Indexed: 05/16/2023]
Abstract
Petroleum-based films have contributed immensely to various environmental issues. Developing green-based films from carbohydrate polymers is crucial for addressing the harms encountered. However, some limitations exist on their property, processibility, and applicability that prohibit their processing for further developments. This review discusses the potential carbohydrate polymers and their sources, film preparation methods, such as solvent-casting, tape-casting, extrusion, and thermo-mechanical compressions for green-based films using various biological polymers with their merits and demerits. Research outcomes revealed that the essential characteristics improvement achieved by incorporating different metallic nanoparticles has significantly reformed the properties of biofilms, including crystallization, mechanical stability, thermal stability, barrier function, and antimicrobial activity. The property-enhanced bio-based films made with nanoparticles are potentially interested in replacing fossil-based films in various areas, including food-packaging applications. The review paves a new way for the commercial use of numerous carbohydrate polymers to help maintain a sustainable green environment.
Collapse
Affiliation(s)
- Yezihalem Zena
- Department of Chemical Engineering, School of Mechanical, Chemical and Materials Engineering, Adama Science and Technology University, Adama 1888, Ethiopia
| | - Selvakumar Periyasamy
- Department of Chemical Engineering, School of Mechanical, Chemical and Materials Engineering, Adama Science and Technology University, Adama 1888, Ethiopia.
| | - Melaku Tesfaye
- Department of Chemical Engineering, School of Mechanical, Chemical and Materials Engineering, Adama Science and Technology University, Adama 1888, Ethiopia
| | - Zelalem Tumsa
- Department of Chemical Engineering, School of Mechanical, Chemical and Materials Engineering, Adama Science and Technology University, Adama 1888, Ethiopia
| | - Mani Jayakumar
- Department of Chemical Engineering, Haramaya Institute of Technology, Haramaya University, P.O. Box No. 138, Haramaya, Dire Dawa, Ethiopia
| | - Badr A Mohamed
- Department of Agricultural Engineering, Cairo University, Giza 12613, Egypt
| | - Perumal Asaithambi
- Faculty of Civil and Environmental Engineering, Jimma Institute of Technology, Jimma University, Po Box - 378, Jimma, Ethiopia
| | - Tejraj M Aminabhavi
- Center for Energy and Environment, School of Advanced Sciences, KLE Technological University, Hubballi 580 031, India.
| |
Collapse
|
4
|
Andrzejewski J, Michałowski S. Development of a New Type of Flame Retarded Biocomposite Reinforced with a Biocarbon/Basalt Fiber System: A Comparative Study between Poly(lactic Acid) and Polypropylene. Polymers (Basel) 2022; 14:polym14194086. [PMID: 36236034 PMCID: PMC9572391 DOI: 10.3390/polym14194086] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/05/2022] [Revised: 09/22/2022] [Accepted: 09/26/2022] [Indexed: 11/16/2022] Open
Abstract
A new type of partially biobased reinforcing filler system was developed in order to be used as a flame retardant for polylactic acid (PLA) and polypropylene (PP)-based composites. The prepared materials intended for injection technique processing were melt blended using the novel system containing ammonium polyphosphate (EX), biocarbon (BC), and basalt fibers (BF). All of the prepared samples were subjected to a detailed analysis. The main criterion was the flammability of composites. For PLA-based composites, the flammability was significantly reduced, up to V-0 class. The properties of PLA/EX/BC and PLA/EX/(BC-BF) composites were characterized by their improved mechanical properties. The conducted analysis indicates that the key factor supporting the effectiveness of EX flame retardants is the addition of BC, while the use of BF alone increases the flammability of the samples to the reference level. The results indicate that the developed materials can be easily applied in industrial practice as effective and sustainable flame retardants.
Collapse
Affiliation(s)
- Jacek Andrzejewski
- Institute of Materials Technology, Faculty of Mechanical Engineering, Poznan University of Technology, Piotrowo 3 Stree, 61-138 Poznan, Poland
- Correspondence: ; Tel.: +48-61-665-5858
| | - Sławomir Michałowski
- Department of Chemistry and Technology of Polymers, Cracow University of Technology, 24 Warszawska Street, 31-155 Kraków, Poland
| |
Collapse
|
5
|
Effect of polycarbodiimide on the structure and mechanical properties of PLA/PBAT blends. JOURNAL OF POLYMER RESEARCH 2022. [DOI: 10.1007/s10965-022-03227-8] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/15/2022]
|
6
|
Dessalegn Y, Singh B, van Vuure AW, Rajhi AA, Duhduh AA, Hossain N, Ahmed GMS. Mechanical Properties of Bambusa Oldhamii and Yushania-Alpina Bamboo Fibres Reinforced Polypropylene Composites. Polymers (Basel) 2022; 14:polym14132733. [PMID: 35808778 PMCID: PMC9268778 DOI: 10.3390/polym14132733] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/01/2022] [Revised: 06/21/2022] [Accepted: 06/24/2022] [Indexed: 11/16/2022] Open
Abstract
The current studies aim to measure the mechanical strength based on age, harvesting season and bamboo species in Ethiopia. The bamboo fibres are extracted using a roll milling machine, which was developed by the author. The age groups (1, 2 and 3 years), harvesting months (February and November), and bamboo species (Yushania alpina and Bambusa oldhamii) are the parameters of the current research studies. Prepregs and composites were produced from bamboo fibres and polypropylene. The mechanical properties of bamboo fibres and their composites in Ethiopia have not been investigated by researchers for the composite application so far. The tensile strength, Young’s modulus, and impact strength of injibara (Y. alpina) bamboo fibres reinforced PP composites from the ages of 1– 3 years old in November is 111 ± 9–125 ± 8 MPa, 15 ± 0.9–25 ± 0.72 GPa, and 47 ± 5 KJ/m2–57 ± 6 KJ/m2, whereas, in February, it is 86 ± 3.86–116 ± 10 MPa, 11 ± 0.71–23 ± 1.5 GPa, and 34 ± 4–52 ± 6 KJ/m2, respectively. Moreover, Kombolcha (B. oldhamii), bamboo fibres reinforced PP composites in November are 93 ± 7–111 ± 8 MPa, 7 ± 0.51–17 ± 2.56 GPa, and 39 ± 4–44 ± 5 KJ/m2, whereas, in February, it is 60 ± 5–104 ± 10 MPa, 12 ± 0.95–14 ± 0.92 GPa, and 26 ± 3 KJ/m2–38 ± 4 KJ/m2, respectively. Furthermore, Mekaneselam (Y. alpina) bamboo fibres reinforced PP composites in November are 99 ± 8–120 ± 11 MPa, 9 ± 0.82–16 ± 1.85 GPa, and 37 ± 4 KJ/m2–46 ± 5 KJ/m2, whereas, in February, it is 91 ± 8–110 ± 9 MPa, 8 ± 0.75–14 ± 1.86 GPa, and 34 ± 3 KJ/m2–40 ± 4 KJ/m2, respectively. At two years, November and Injibara bamboo have recorded the highest mechanical properties in the current research studies. Bamboo fiber strength in Ethiopia is comparable to the previous study of bamboo fibres and glass fibres used for composite materials in the automotive industry.
Collapse
Affiliation(s)
- Yalew Dessalegn
- Program of Mechanical Design and Manufacturing Engineering, Department of Mechanical Engineering, Adama Science and Technology University, Adama 1888, Ethiopia; (Y.D.); (G.M.S.A.)
| | - Balkeshwar Singh
- Program of Mechanical Design and Manufacturing Engineering, Department of Mechanical Engineering, Adama Science and Technology University, Adama 1888, Ethiopia; (Y.D.); (G.M.S.A.)
- Correspondence:
| | - Aart W. van Vuure
- Department Materials Engineering, Campus Group T, Composite Materials Group, KU Leuven, Andreas Vesaliusstraat 13, 3000 Leuven, Belgium;
| | - Ali A. Rajhi
- Department of Mechanical Engineering, College of Engineering, King Khalid University, Abha 61421, Saudi Arabia;
| | - Alaauldeen A. Duhduh
- Department of Mechanical Engineering Technology, CAIT, Jazan University, Prince Mohammed Street, P.O. Box 114, Jazan 45142, Saudi Arabia;
| | - Nazia Hossain
- School of Engineering, RMIT University, Melbourne, VIC 3001, Australia;
| | - Gulam Mohammed Sayeed Ahmed
- Program of Mechanical Design and Manufacturing Engineering, Department of Mechanical Engineering, Adama Science and Technology University, Adama 1888, Ethiopia; (Y.D.); (G.M.S.A.)
- Center of Excellence (COE) for Advanced Manufacturing Engineering, Adama Science and Technology University, ASTU, Adama 1888, Ethiopia
| |
Collapse
|
7
|
Song J, Li S, Han J. Performance of nitrogenous polybutylene succinate/polylactic acid materials and their degradation effects on physiological indicators of lettuce. REACT FUNCT POLYM 2022. [DOI: 10.1016/j.reactfunctpolym.2022.105294] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
|
8
|
Tor-Świątek A, Garbacz T, Stloukal P. Analysis of Selected Properties of Microporous PLA as a Result of Abiotic Degradation. MATERIALS 2022; 15:ma15093133. [PMID: 35591467 PMCID: PMC9101509 DOI: 10.3390/ma15093133] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/21/2022] [Revised: 04/21/2022] [Accepted: 04/23/2022] [Indexed: 01/27/2023]
Abstract
In the study, an investigation was made into the hydrolytic degradation behavior of the microporous polylactide (PLA) in the initial stage in three biological buffer solutions with various pH-simulating body fluids in comparison with pure PLA. Studies also include the analysis of selected mechanical properties and physical structures. A microporous PLA was obtained by melt extrusion using a chemical blowing agent. The rate of Mw decrease induced by hydrolysis over 35 days of microporous PLA was roughly comparable to the pure material. The rate of depolymerization was slightly accelerated at an acid pH due to acid-catalyzed hydrolysis at the end of the observed period. The mechanical analysis showed the influence of various pH on the obtained results.
Collapse
Affiliation(s)
- Aneta Tor-Świątek
- Faculty of Mechanical Engineering, Lublin University of Technology, 36 Nadbystrzycka, Str., 20-816 Lublin, Poland;
| | - Tomasz Garbacz
- Faculty of Mechanical Engineering, Lublin University of Technology, 36 Nadbystrzycka, Str., 20-816 Lublin, Poland;
- Correspondence:
| | - Petr Stloukal
- Centre of Polymer Systems, Tomas Bata University in Zlin, Tř. T. Bati 5678, 760 01 Zlin, Czech Republic;
| |
Collapse
|
9
|
Vahabi H, Laoutid F, Formela K, Saeb MR, Dubois P. Flame-Retardant Polymer Materials Developed by Reactive Extrusion: Present Status and Future Perspectives. POLYM REV 2022. [DOI: 10.1080/15583724.2022.2052897] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
Affiliation(s)
- Henri Vahabi
- Université de Lorraine, CentraleSupélec, LMOPS, Metz, France
| | - Fouad Laoutid
- Laboratory of Polymeric & Composite Materials, Materia Nova Research Center, Mons, Belgium
| | - Krzysztof Formela
- Department of Polymer Technology, Faculty of Chemistry, Gdańsk University of Technology, Gdańsk, Poland
| | | | - Philippe Dubois
- Laboratory of Polymeric and Composite Materials (LPCM), Materia Nova/University of Mons, Mons, Belgium
| |
Collapse
|
10
|
Zhao X, Li J, Liu J, Zhou W, Peng S. Recent progress of preparation of branched poly(lactic acid) and its application in the modification of polylactic acid materials. Int J Biol Macromol 2021; 193:874-892. [PMID: 34728305 DOI: 10.1016/j.ijbiomac.2021.10.154] [Citation(s) in RCA: 29] [Impact Index Per Article: 9.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/20/2021] [Revised: 09/30/2021] [Accepted: 10/20/2021] [Indexed: 01/01/2023]
Abstract
Poly (lactic acid) (PLA) with branched structure has abundant terminal groups, high melt strength, good rheological properties, and excellent processability; it is a new research and application direction of PLA materials. This study mainly summarizes the molecular structure design, preparation methods, basic properties of branched PLA, and its application in modified PLA materials. The structure and properties of branched PLA prepared by ring-opening polymerization of monomer, functional group polycondensation, and chain extender in the processing process were introduced. The research progress of in situ formation of branched PLA by initiators, multifunctional monomers/additives through dynamic vulcanization, and irradiation induction was described. The effect of branched PLA on the structure and properties of linear PLA materials was analyzed. The role of branched PLA in improving the crystallization behavior, phase morphology, foaming properties, and mechanical properties of linear PLA materials was discussed. At the same time, its research progress in biomedicine and tissue engineering was analyzed. Branched PLA has excellent compatibility with PLA, which has important research value in regulating the structure and properties of PLA materials.
Collapse
Affiliation(s)
- Xipo Zhao
- Hubei Provincial Key Laboratory of Green Materials for Light Industry, Collaborative Innovation Center of Green Light-weight Materials and Processing, Hubei University of Technology, Wuhan 430068, China.
| | - Juncheng Li
- Hubei Provincial Key Laboratory of Green Materials for Light Industry, Collaborative Innovation Center of Green Light-weight Materials and Processing, Hubei University of Technology, Wuhan 430068, China
| | - Jinchao Liu
- Hubei Provincial Key Laboratory of Green Materials for Light Industry, Collaborative Innovation Center of Green Light-weight Materials and Processing, Hubei University of Technology, Wuhan 430068, China
| | - Weiyi Zhou
- Hubei Provincial Key Laboratory of Green Materials for Light Industry, Collaborative Innovation Center of Green Light-weight Materials and Processing, Hubei University of Technology, Wuhan 430068, China
| | - Shaoxian Peng
- Hubei Provincial Key Laboratory of Green Materials for Light Industry, Collaborative Innovation Center of Green Light-weight Materials and Processing, Hubei University of Technology, Wuhan 430068, China.
| |
Collapse
|