Multi-Technique Investigation of Grave Robes from 17th and 18th Century Crypts Using Combined Spectroscopic, Spectrometric Techniques, and New-Generation Sequencing

Multi-Analytical Techniques for the Study of Burial Clothes of Polish King Sigismund III Vasa (1566-1633) and His Wife Constance Habsburg (1588-1631)

The subjects of this research are the burial clothes of Polish King Sigismund III Vasa and his wife Constance, which were woven and embroidered with silk and metal threads. Fragments of the textiles underwent spectroscopic, spectrometric, and thermogravimetric analyses. The hydrofluoric acid extraction method was improved to isolate various classes of dyes from the textile samples that had direct contact with human remains. High-performance liquid chromatography, coupled with diode array and tandem mass spectrometry detectors with electrospray ionization (HPLC-DAD-ESI-MS/MS) facilitated the detection and identification of colorants present in the textiles. Cochineal, indigo-, madder-, orchil-, and tannin-producing plants were identified as the sources of dyes used. Scanning electron microscopy with an energy-dispersive X-ray detector (SEM-EDS) was employed to identify and characterize the silk fibers and mordants and the metal threads. The presence of iron, aluminum, sodium, and calcium in the silk threads suggests their potential use as mordants. The analysis of the metal threads revealed that most of them were made from flattened gilded silver wire, with only a few being cut from a sheet of metal. Typical degradation mechanisms of metal threads were shown, resulting from both burial environment and earlier manufacturing process, and the use of the textiles in clothing, i.e., a significant loss of the gold layer was observed in most of silver gilt threads, caused by abrasion and delamination. The results of the thermal analysis confirmed the presence of silk and silver threads in the examined textiles.

Material Evidence of Sediments Recovered from Ancient Amphorae Found at the Potaissa Roman Fortress

Methods for material investigation are powerful tools that allow specialists to elucidate important aspects regarding ancient artifacts such as the Roman amphorae deposits discovered at Potaissa Fortress in Turda, Romania. Archeological debate states that the deposit contained olive oil and wine amphorae, but no material evidence has been presented until now. The current research is focused on the most representative large amphora fragments found in the Potaissa deposit, with a significant amount of sediment on their walls, to give archeologists the material proof to elucidate their debate. Sediment was collected from each fragment and subjected to complex analysis. XRD investigation combined with cross-polarized light microscopy demonstrated mineral particles such as quartz, clay (muscovite and traces of biotite), and calcite. Quartz and calcite particles have a rounded shape and diameters in a range of 20-200 µm, and clay particles have a lamellar shape and dimensions from 1 to 20 µm, a fact confirmed by SEM microscopy. Sample 2 presented a large amount of amorphous phase followed by Samples 1 and 3, with a low amount of organic phase. FTIR investigation confirms organic phase presence owing to strong absorption bands regarding C-H, C=O, and O-H chemical bonds related to aliphatic compounds in Sample 2, and to some decayed wine residue in Samples 1 and 3. EDS elemental analysis was used for organic particle identification in the amphora sediments and to obtain a correlation with their microstructure. GC-MS investigation showed volatile compounds related to wine residue for Samples 1 and 3 and decomposed fats for Sample 2. Tartaric and malic acid were identified by HPLC in Samples 1 and 3, which are wine biomarkers. The correlation of all experimental results concludes with no doubt that Amphora 2 contained olive oil and Amphorae 1 and 3 contained wine in ancient times.

Silver Depreciation in 3-Polker Coins Issued during 1619-1627 by Sigismund III Vasa King of Poland

The present research is focused on the 3-Polker coins issued during 1619-1627 by Sigismund III Vasa, King of Poland. A major financial crisis took place at that time due to the 30-year War, which started in 1619. There are two theories among historians concerning the silver depreciation of these coins. The most common theory (generally accepted without proof) is that the later years of issue are depreciated below 60% Ag. The second theory is based on the medieval sources that indicate inflation during the years from 1621-1625, but the medieval source only refers to the inflation of the type of coins and does not mention the issuer. Therefore, in this study, we use modern investigation techniques and materials science methods to help historians elucidate the aforementioned aspects regarding the medieval period. The XRD investigation results are in good agreement with the SEM-EDX elemental analysis. The coins from 1619 and 1620 have high silver content, namely, 86.97% and 92.49%, which corresponds to good silver. The amount of Ag found in the coins from 1621-1625 issituated in the range of 63.2-74.6%. The silver titleis suddenly restored in 1626 at about 84.3% and is kept in a good range until the end of this decree under Sigismund III in 1627. In conclusion, the second theory was partly validated by our experimental results, certifying the currency depreciation during 1621-1625, but the silver title was not lower than 54.2%. Notably, even this depreciated silver title assures a good quality of the 3-Polker coins compared to similar coins issued in other countries that were copper-silver-plated. Therefore, the 3-Polker coins were preferably hoarded at that time.Small alterations in the mint mark's design were observed in all the depreciated coins compared to the good ones. This might be a sign for an expert to identify the depreciated coins, a fact which requires supplementary investigations. The silver title's restoration in 1626 also came with a complete change of the mintmark.

Structure and Stability Characterization of Natural Lake Pigments Made from Plant Extracts and Their Potential Application in Polymer Composites for Packaging Materials

Natural dyes were extracted from various plant sources and converted into lake pigments based on aluminum and tin. Three different plants (weld, Persian berries, and Brazilwood) were chosen as representative sources of natural dyes. High-performance liquid chromatography (HPLC) and triple-quadrupole mass spectrometry (QqQ MS) were used to identify dyestuffs in the raw extracts. The natural dyes and lake pigments were further characterized by optical and scanning electron microscopy (SEM), UV-Vis spectrophotometry, and thermogravimetric analysis (TGA). The stabilization of the studied plant extracts onto aluminum and tin salts led to the formation of natural lake pigments characterized by different color shades. The natural lake pigments showed improved thermal and chemical stability, which was confirmed by their higher degradation temperatures and lower solubility in chemical agents compared to natural dyes extracted from plants. This improvement can be attributed to electrostatic attraction due to the process of chelation. Ethylene-norbornene (EN) composites colored with the lake pigments exhibited uniform color and improved resistance to long-term UV exposure aging. After 300 h of UV exposure, the aging factor of the neat EN copolymer reduced to 0.3, indicating an advanced aging process of polymer compared to colored samples. Prolonged UV exposure deteriorated the mechanical properties of EN by approximately 57%, compared to about 43% with the application of BW/Al lake pigment. Natural lake pigments could be used as effective substitutes for commercial colorants in plastics for packaging applications.

The Mechanism of a Retro-Diels-Alder Fragmentation of Luteolin: Theoretical Studies Supported by Electrospray Ionization Tandem Mass Spectrometry Results

The mechanisms of retro-Diels-Alder fragmentation of luteolin are studied theoretically using the Density Functional Theory method (B3LYP hybrid functional) together with the 6-311++G(d,p) basis set and supported by electrospray ionization tandem mass spectrometry (ESI-MS) results. The reaction paths leading to the formation of 1,3A- and 1,3B- fragment ions observed as the main spectral features in the ESI-MS spectrum are described and discussed, including the structures of the transition states and intermediate products. The heights of the activation energy barriers which have to be overcome along the reaction paths corresponding to 1,3-retrocyclization cleavage of the ionized luteolin are predicted to span the 69-94 kcal/mol range (depending on the initial isomeric structure) for the concerted retrocyclization mechanism and the 60-89 kcal/mol (first barrier) and 24-52 kcal/mol (second barrier) barriers for the stepwise mechanism (also depending on the initial isomeric structure). It is also demonstrated that the final fragmentation products (1,3A- and 1,3B-) are in fact represented by various isomeric systems which are not experimentally distinguishable. In addition, the absence of the spectral feature corresponding to the [M-B]- fragment ion formed by the rupture of the C-C bond connecting luteolin's B and C rings (which does not occur during the ESI-MS experiment) is explained by much larger energy barriers predicted for such a process.