Evaluation of the Performance of Bio-Based Rigid Polyurethane Foam with High Amounts of Sunflower Press Cake Particles

The Impact of Isocyanate Index and Filler Functionalities on the Performance of Flexible Foamed Polyurethane/Ground Tire Rubber Composites

The structure and performance of polyurethane (PU) foams are strongly driven by the stoichiometry of the polyaddition reaction, quantitatively described by the isocyanate index. It determines the balance between isocyanate and hydroxyl groups in the reacting system and is affected by the introduction of additional functionalities originated, e.g., from applied fillers. Nevertheless, this issue is hardly taken into account in research works. Herein, the structure and performance of PU/ground tire rubber (GTR) composites differing in their isocyanate index (from 0.8 to 1.2) and prepared with and without considering the GTR functionalities in formulation development were investigated. Incorporating GTR into the PU matrix led to a reduction in average cell diameter (from 2 to 30% depending on the isocyanate index) compared to unfilled foams. However, formulation adjustments did not show a significant impact on cellular structure. The only decrease in open cell content was noted, from 10% for the 0.9 index to 40% for 1.2. Such changes were related to the increasing strength of the PU cellular structure able to maintain inside the increasing amount of carbon dioxide. On the other hand, considering hydroxyl values of GTR noticeably affected the thermomechanical performance of composites. The shift of glass transition temperature (T_g), even by 10 °C for 1.2 isocyanate index, enhanced the performance of materials, which was expressed in an 8-62% drop in the composite performance factor, pointing to the enhanced reinforcing effect resulting from filler incorporation. The stiffening of foams, related to the variations in PU segmental structure, also caused minor changes in the course of thermal degradation of PU/GTR composites due to the inferior thermal stability of hard segments. The obtained results provide important insights into the development of formulations of PU composites filled with materials containing reactive functional groups able to disrupt the stoichiometric balance of the polyaddition reaction.

Investigation of the relation between free volume and physico-mechanical performance in rigid polyurethane foam containing turkey feather fibers: Part 2

Rigid polyurethane foams (RPUFs) were modified with 0–15 wt.% turkey feather fibers (TFFs) produced from waste turkey feathers. One-shut free rising method was used for the production of TFFs-filled-RPUFs in a closed mold. The dependence of mechanical performance and water vapor permeability (WVP) feature of the final foams on TFFs loading was evaluated with free volume change. The free volume analysis was performed via Positron Annihilation Lifetime Spectroscopy (PALS), while the mechanical and WVP characteristics were determined with the use of the universal tester machines. PALS findings showed that the incorporation of TFFs with RPUF matrix caused the considerable diminishment in the free volume due to TFFs serving as a filling material and formation of strong secondary bonds between components. Moreover, tensile strength and extension of the foams decreased with the increasing of TFFs, which caused by the occurrence of noteworthy restriction on the spatial alignment and orientation capability of polyurethane chains due to the lack of sufficient free volume allowing the chains to move freely. As for the compression tests, all the TFFs-loaded RPUFs depicted substantially lower performance due to TFFs interfering with the ordered organization of isocyanate domains. Moreover, impact test results showed that the addition of TFFs into RPUF matrix brought about the insufficient impact energy delocalization throughout the matrix due to the restriction on the mobility of polymer chains. Additionally, the remarkable diminishment in WVP was recorded due to the reduction in the number of vacancies and constitution of keratin composed of roundly 60% of hydrophilic protein (especially cystine). All in all, this study established a strong links between free volume and characteristics of TFFs-loaded RPUFs.

Rigid Polyurethane Biofoams Filled with Chemically Compatible Fruit Peels

Banana and bergamot peels are underutilized byproducts of the essential oil and juice-processing industry. This study was designed for the development of rigid polyurethane foam (RPUF) composites using polysaccharide-rich fruit peels as fillers. These fillers were characterized for chemical properties using wet analyses. Additionally, the influences of the filler type and filler content on morphological, thermal, mechanical, hygroscopic, and colorimetric properties of the RPUF were investigated. The main results indicated that, in a comparison with the neat RPUF, the insertion of up to 15% of fillers yielded similar water uptake, apparent density, compressive strength, and color properties, as well as increases up to 115% in thermal stability and up to 80% in cell size.

Morphological Features of PUR-Wood Particle Composite Foams

The aim of this study was to apply waste wood particles (WP) with different sizes from primary wood processing as a filler for open-cell PUR foams. For this purpose, various wood particle sizes were added as a filler for polyurethane foams (PUR). The effects of the addition of of 0.05−<0.125 mm, 0.125−<0.315 mm, 0.315−1.25 mm, and >1.25−2.0 of WP to the polyurethane matrix on the density, the kinetics of PUR foaming, the cell structure, and the morphology were investigated. Scanning electron microscope (SEM) and X-ray computer tomography were used. Based on the results, it was found that the addition of WP in the amount of 10% leads to an increase in density with an increase in particle size. The research shows that the morphology of the PUR-WP foam is influenced by its particle size. The difference in the number and size of cells in PUR-WP composites depends on the wood particle size. The addition of dust causes the formation of cells of much smaller sizes; confirmed by SEM images. Moreover, computer tomography clearly demonstrates that the WP are well-dispersed within the foams’ structures.

New Composite Materials Made from Rigid/Flexible Polyurethane Foams with Fir Sawdust: Acoustic and Thermal Behavior

The aim of this work is to obtain new materials with improved sound absorbing and thermal properties, using rigid or flexible polyurethane foam reinforced with recycled fir sawdust from wood processing as well as by optimizing their mixing ratio. In this respect, we prepared and characterized samples by mixing rigid polyurethane foam (RPUF)/flexible polyurethane foam (FPUF) with 0, 35, 40, 45, and 50 wt% fir sawdust (FS) with grains size larger than 2 mm. The samples were evaluated by cell morphology analysis, sound absorption, and thermal insulation performance. The obtained composite materials containing 50% sawdust have superior acoustic properties compared to those with 100% FPUF in the range of 420-1250 Hz. The addition of 35% and 50% FS in the FPUF matrix led to improved thermal insulation properties and decreased thermal insulation properties in the case of RPUF. The results show that the use of FS-based composites with the FPUF/RPUF matrix for sound absorption and thermal insulation applications is a desirable choice and could be applied as an alternative to conventional synthetic fiber-based materials and as a recycling method of waste wood.