Synthetic Material for Bone, Periodontal, and Dental Tissue Regeneration: Where Are We Now, and Where Are We Heading Next?

Collagen-Based Medical Devices for Regenerative Medicine and Tissue Engineering

Assisted reproductive technologies are key to solving the problems of aging and organ defects. Collagen is compatible with living tissues and has many different chemical properties; it has great potential for use in reproductive medicine and the engineering of reproductive tissues. It is a natural substance that has been used a lot in science and medicine. Collagen is a substance that can be obtained from many different animals. It can be made naturally or created using scientific methods. Using pure collagen has some drawbacks regarding its physical and chemical characteristics. Because of this, when collagen is processed in various ways, it can better meet the specific needs as a material for repairing tissues. In simpler terms, collagen can be used to help regenerate bones, cartilage, and skin. It can also be used in cardiovascular repair and other areas. There are different ways to process collagen, such as cross-linking it, making it more structured, adding minerals to it, or using it as a carrier for other substances. All of these methods help advance the field of tissue engineering. This review summarizes and discusses the current progress of collagen-based materials for reproductive medicine.

In Vivo feature of the regenerative potential of chitosan and alginate based osteoplastic composites doped with calcium phosphates, zinc ions, and vitamin D2

PURPOSE

In vivo comparison of the regenerative potential of two calcium phosphate-biopolymer osteoplastic composites: а) based on alginate (Alg) and hydroxyapatite (HA) - Alg/HA/CS/Zn/D2, b) based on chitosan (CS) and brushite (DCPD) - CS/DCPD/D2.

MATERIALS AND METHODS

36 white male laboratory rats aged six months were used. A defect to the bone marrow canal in the middle of the femur diaphysis was made with a dental bur of 2 mm. The bone defect healed under the blood clot (control) in the different animal groups and was filled with Alg/HA/CS/Zn/D2 and CS/DCPD/D2. The regeneration of the bone defect was studied on the 30th, 90th, and 140th days by computer tomography (CT).

RESULTS

On the 30th day, all groups' implantation site optical density (OD) was significantly lower than that of the adjacent maternal bone (MB). Intensity of bone formation for Alg/HA/CS/Zn/D2 exceeds CS/DCPD/D2. On the 90th day, the bone trauma site OD with Alg/HA/CS/Zn/D2 (1725.4 ± 86 HU) and CS/DCPD/D2 (1484.9 ± 69 HU) exceeded the OD of the control (942.5 ± 55 HU). On the 140th day, the OD of Alg/HA/CS/Zn/D2 and CS/DCPD/D2 implantation sites was higher than Control and MB OD. Visually, the area of the past injury with the Alg/HA/CS/Zn/D2 could be detected only by the presence of an endosteal bone callus and in the case of CS/DCPD/D2 - by the shadow of the remaining biomaterial in the bone marrow canal.

CONCLUSIONS

According to CT data, Alg/HA/CS/Zn/D2 and CS/DCPD/D2 contribute to the complete healing of the femoral diaphysis defect in 140 days, but the regenerative potential of Alg/HA/CS/Zn/D2 from 30 days to 140 days is higher than CS/DCPD/D2 biomaterial.

Synthetic composites versus calcium phosphate cements in bone regeneration: A narrative review

BACKGROUND

When the natural process of bone remodeling is disturbed, the need arises for a stimulant material in order to enhance the formation of a new healthy and strong osseous tissue to replace the damaged one. Recent studies have reported synthetic biomaterials to be a very good option for supporting bone regeneration.

STUDY DESIGN

Narrative review.

OBJECTIVE

This review aims to provide a brief presentation of two of the most recently developed synthetic biomaterials, i.e. calcium phosphate cements and synthetic composites, that are currently being used in bone regeneration with promising results.

METHODS

Literature searches using broad terms such as "bone regeneration," "biomaterials," "synthetic composites" and "calcium phosphate cements" were performed using PubMed. The osteal cells state of the art was explored by searching topic-specific full text keywords using Google Scholar.

CONCLUSIONS

Synthetic polymers such as PCL (poly-ε-caprolactone) and PLGA (poly lactic-co-glycolic acid) can improve the effectiveness of biomaterials like HA (hydroxyapatite) and BG (bioglass). Calcium phosphate, although being a suitable material for stimulating bone regeneration, needs an adjuvant in order to be effective in larger bone defects.

Evaluation of Physical Properties in Carboxymethyl Chitosan Modified Glass Ionomer Cements and the Effect for Dentin Remineralization: SEM/EDX, Compressive Strength, and Ca/P Ratio

OBJECTIVE

 The aim of this article was to evaluate the effects of modifying glass ionomer cement (GIC) with carboxymethyl chitosan (CMC) on surface morphology and remineralization outcomes by examining dentin morphology and calcium ion composition changes.

MATERIALS AND METHODS

 Thirty holes in a cylindrical acrylic mold were filled with three groups of restorative materials: GIC, GIC modified with CMC (GIC-CMC) 5%, and GIC-CMC10%. The surface morphology of each group's materials was observed using scanning electron microscopy (SEM). The compressive strength measurement was performed using a universal testing machine. The dentin remineralization process was performed by applying GIC, GIC-CMC5%, and GIC-CMC10% materials for 14 days on demineralized dentin cavities treated with 17% ethylenediamine tetraacetic acid (EDTA) for 7 days. A morphological evaluation was conducted using SEM. The calcium ion composition and calcium-to-phosphorous (Ca/P) ratio were examined using an energy-dispersive X-ray (EDX).

STATISTICAL ANALYSIS

 The Kruskal-Wallis and post-hoc Mann-Whitney U tests were performed to compare all four groups of calcium ions (p < 0.05).

RESULTS

 The modification of GIC with CMC affected the morphological changes in the materials in the form of reduced porosity and increased fractures. A significant difference was found in compressive strength between the GIC-CMC modification materials of GIC-CMC5% and GIC-CMC10% and the GIC control group. The dentin tubule morphology and surface changes were observed after applying GIC, GIC-CMC5%, and GIC-CMC10% materials for 14 days, as evaluated by SEM. The EDX examination showed an increase in calcium ion content and hydroxyapatite formation (Ca/P ratio) after applying the GIC-CMC10% material.

CONCLUSION

 The surface porosity of the GIC modification material with the addition of CMC tended to decrease. However, an increase in cracked surfaces that widened, along with the rise in CMC percentage, was found. This modification also reduced the compressive strength of the materials, with the lowest average yield at 10% CMC addition. Therefore, the modification of GIC with CMC affects changes in morphology, calcium ion composition, and Ca/P ratio in demineralized dentin.

Biofabrication Strategies for Oral Soft Tissue Regeneration

Gingival recession, a prevalent condition affecting the gum tissues, is characterized by the exposure of tooth root surfaces due to the displacement of the gingival margin. This review explores conventional treatments, highlighting their limitations and the quest for innovative alternatives. Importantly, it emphasizes the critical considerations in gingival tissue engineering leveraging on cells, biomaterials, and signaling factors. Successful tissue-engineered gingival constructs hinge on strategic choices such as cell sources, scaffold design, mechanical properties, and growth factor delivery. Unveiling advancements in recent biofabrication technologies like 3D bioprinting, electrospinning, and microfluidic organ-on-chip systems, this review elucidates their precise control over cell arrangement, biomaterials, and signaling cues. These technologies empower the recapitulation of microphysiological features, enabling the development of gingival constructs that closely emulate the anatomical, physiological, and functional characteristics of native gingival tissues. The review explores diverse engineering strategies aiming at the biofabrication of realistic tissue-engineered gingival grafts. Further, the parallels between the skin and gingival tissues are highlighted, exploring the potential transfer of biofabrication approaches from skin tissue regeneration to gingival tissue engineering. To conclude, the exploration of innovative biofabrication technologies for gingival tissues and inspiration drawn from skin tissue engineering look forward to a transformative era in regenerative dentistry with improved clinical outcomes.

Prognosis recovery score of apical surgery Guided Bone Regeneration using cone beam computed tomography and digital bioinformatics

Objective

Guided Bone Regeneration (GBR) is a dental surgical procedure that uses barrier membranes to prevent soft tissue invasion and conduct new bone growth. This study aimed to define a Prognosis Recovery score (PR score) to objectively classify post-surgery responders from non-responder patients who underwent GBR using Cone Beam Computed Tomography (CBCT).

Methods

This prospective-observational-longitudinal-cohort study recruited 250 individuals who were assigned to: Conventional-Apical-Surgery (CAS, n = 39), Apical-Surgery using human fascia lata Membrane placement (ASM, n = 42), and Apical-Surgery using human fascia lata Membrane placement and lyophilized allograft Bone powder (ASMB, n = 39); and Apical-Surgery using collagen membrane Porcine origin and Bovine Bone-matrix (ASPBB, n = 130), an independent external validation cohort. Surgery was performed, and evolution was monitored by CBCTs at 0, 6-, 12-, 18-, and 24 months post-surgery.

Results

Normalized lesion volumes were calculated, and non-linear time evolution morphology curves were characterized. The three-time evolution bone growth patterns were: a linear tendency (PR0), "S'' shaped log-logistic (PR1), and "C" cellular growth (PR2). The treatment success rates were PR2-46 %, PR2-88 %, and PR2-95 %/PR1-5% for CAS, ASM, and ASMB groups. The xenograft ASPBB counterpart achieved PR2-92 % and PR1-8%. The score PR had a sensitivity, specificity, and accuracy of 100 %.

Conclusions

Patients' treatment success can be quantitatively, objectively, and precisely predicted with the Prognosis Recovery score (using only two CBCTs), according to their biological response to allograft or xenograft materials (time-evolution bone growth curves), reducing cost and radiation exposure.

Clinical significance

Through digital imaging and bioinformatic analysis of bone regeneration observed in CBCTs, we defined a Prognosis Recovery (PR) score using only two CBCT volume assessments (0 and 6 months). The PR score allowed us to define three time-evolution curves depending on the biomaterials used and to classify patients in a quantitative, objective, and accurate way.

Exploring the potential of calcium-based biomaterials for bone regeneration in dentistry: a systematic review

INTRODUCTION

Regenerative medicine emerged as a promising strategy for addressing bone defects, with several bone grafts currently being used, including autografts, allografts, xenografts and alloplasts. Calcium-based biomaterials (CaXs), a well-known class of synthetic materials, have demonstrated good biological properties and are being investigated for their potential to facilitate bone regeneration. This systematic review evaluates the current clinical applications of CaXs in dentistry for bone regeneration.

EVIDENCE ACQUISITION

A comprehensive search was conducted to collect information about CaXs and their applications in the dental field over the last ten years. The search was limited to relevant articles published in peer-reviewed journals.

EVIDENCE SYNTHESIS

A total of 72 articles were included in this scoping review, with eight studies related to periodontology, 63 in implantology and three in maxillofacial surgery respectively. The findings suggest that CaXs hold promise as an alternative intervention for minor bone regeneration in dentistry.

CONCLUSIONS

Calcium-based biomaterials have shown potential as a viable option for bone regeneration in dentistry. Further research is warranted to fully understand their efficacy and safety in larger bone defects. CaXs represent an exciting avenue for researchers and clinicians to explore in their ongoing efforts to advance regenerative medicine.

Fabrication of 3D chitosan/polyvinyl alcohol/brushite nanofibrous scaffold for bone tissue engineering by electrospinning using a novel falling film collector

Despite its advantages, electrospinning has limited effectiveness in 3D scaffolding due to the high density of fibers it produces. In this research, a novel electrospinning collector was developed to overcome this constraint. An aqueous suspension containing chitosan/polyvinyl alcohol nanofibers was prepared employing a unique falling film collector. Suspension molding by freeze-drying resulted in a 3D nanofibrous scaffold (3D-NF). The mineralized scaffold was obtained by brushite deposition on 3D-NF using wet chemical mineralization by new sodium tripolyphosphate and calcium chloride dihydrate precursors. The 3D-NF was optimized and compared with the conventional electrospun 2D nanofibrous scaffold (2D-NF) and the 3D freeze-dried scaffold (3D-FD). Both minor fibrous and major freeze-dried pore shapes were present in 3D-NFs with sizes of 16.11-24.32 μm and 97.64-234.41 μm, respectively. The scaffolds' porosity increased by 53 % to 73 % compared to 2D-NFs. Besides thermal stability, mineralization improved the 3D-NF's ultimate strength and elastic modulus by 2.2 and 4.7 times, respectively. In vitro cell studies using rat bone marrow mesenchymal cells confirmed cell infiltration up to 290 μm and scaffold biocompatibility. The 3D-NFs given nanofibers and brushite inclusion exhibited considerable osteoinductivity. Therefore, falling film collectors can potentially be applied to prepare 3D-NFs from electrospinning without post-processing.

Combination of a Synthetic Bioceramic Associated with a Polydioxanone-Based Membrane as an Alternative to Autogenous Bone Grafting

The purpose of this study was to evaluate the repair process in rat calvaria filled with synthetic biphasic bioceramics (Plenum® Osshp-70:30, HA:βTCP) or autogenous bone, covered with a polydioxanone membrane (PDO). A total of 48 rats were divided into two groups (n = 24): particulate autogenous bone + Plenum® Guide (AUTOPT+PG) or Plenum® Osshp + Plenum® Guide (PO+PG). A defect was created in the calvaria, filled with the grafts, and covered with a PDO membrane, and euthanasia took place at 7, 30, and 60 days. Micro-CT showed no statistical difference between the groups, but there was an increase in bone volume (56.26%), the number of trabeculae (2.76 mm), and intersection surface (26.76 mm2) and a decrease in total porosity (43.79%) in the PO+PG group, as well as higher values for the daily mineral apposition rate (7.16 µm/day). Histometric analysis presented material replacement and increased bone formation at 30 days compared to 7 days in both groups. Immunostaining showed a similar pattern between the groups, with an increase in proteins related to bone remodeling and formation. In conclusion, Plenum® Osshp + Plenum® Guide showed similar and sometimes superior results when compared to autogenous bone, making it a competent option as a bone substitute.

Bioactive ceramic-based materials: beneficial properties and potential applications in dental repair and regeneration

Bioactive ceramics, primarily consisting of bioactive glasses, glass-ceramics, calcium orthophosphate ceramics, calcium silicate ceramics and calcium carbonate ceramics, have received great attention in the past decades given their biocompatible nature and excellent bioactivity in stimulating cell proliferation, differentiation and tissue regeneration. Recent studies have tried to combine bioactive ceramics with bioactive ions, polymers, bioactive proteins and other chemicals to improve their mechanical and biological properties, thus rendering them more valid in tissue engineering scaffolds. This review presents the beneficial properties and potential applications of bioactive ceramic-based materials in dentistry, particularly in the repair and regeneration of dental hard tissue, pulp-dentin complex, periodontal tissue and bone tissue. Moreover, greater insights into the mechanisms of bioactive ceramics and the development of ceramic-based materials are provided.

From Basic Science to Clinical Practice: A Review of Current Periodontal/Mucogingival Regenerative Biomaterials

Periodontitis is a dysbiosis-driven inflammatory disease affecting the tooth-supporting tissues, characterized by their progressive resorption, which can ultimately lead to tooth loss. A step-wise therapeutic approach is employed for periodontitis. After an initial behavioral and non-surgical phase, intra-bony or furcation defects may be amenable to regenerative procedures. This review discusses the regenerative technologies employed for periodontal regeneration, highlighting the current limitations and future research areas. The search, performed on the MEDLINE database, has identified the available biomaterials, including biologicals (autologous platelet concentrates, hydrogels), bone grafts (pure or putty), and membranes. Biologicals and bone grafts have been critically analyzed in terms of composition, mechanism of action, and clinical applications. Although a certain degree of periodontal regeneration is predictable in intra-bony and class II furcation defects, complete defect closure is hardly achieved. Moreover, treating class III furcation defects remains challenging. The key properties required for functional regeneration are discussed, and none of the commercially available biomaterials possess all the ideal characteristics. Therefore, research is needed to promote the advancement of more effective and targeted regenerative therapies for periodontitis. Lastly, improving the design and reporting of clinical studies is suggested by strictly adhering to the Consolidated Standards of Reporting Trials (CONSORT) 2010 statement.

Amorphous, Carbonated Calcium Phosphate and Biopolymer-Composite-Coated Si3N4/MWCNTs as Potential Novel Implant Materials

A biodegradable amorphous carbonated calcium phosphate (caCP)-incorporated polycaprolactone (PCL) composite layer was successfully deposited by a spin coater. In this specific coating, the PCL acts as a bioadhesive, since it provides a better adherence of the coatings to the substrate compared to powder coatings. The caCP-PCL coatings were deposited and formed thin layers on the surface of a Si3N4-3 wt% MWCNT (multiwalled carbon nanotube) substrate, which is an emerging type of implant material in the biomedical field. The composite coatings were examined regarding their morphology, structure and biological performance. The biocompatibility of the samples was tested in vitro with MC3T3-E1 preosteoblast cells. Owing to the caCP-PCL thin layer, the cell viability values were considerably increased compared to the substrate material. The ALP and LDH tests showed numerous living cells on the investrigated coatings. The morphology of the MC3T3-E1 cells was examined by fluorescent staining (calcein and DAPI) and scanning electron microscopy, both of which revealed a well-spread, adhered and confluent monolayer of cells. All performed biocompatibility tests were positive and indicated the applicability of the deposited thin composite layers as possible candidates for orthopaedic implants for an extended period.

Application of CAD-CAM Technologies for Maxillofacial Bone Regeneration: A Narrative Review of the Clinical Studies

The application of regenerative methods in treating maxillofacial defects can be categorized as functional bone regeneration in which scaffolds without protection are used and in-situ bone regeneration in which a protected healing space is created to induce bone formation. It has been shown that functional bone regeneration can reduce surgical time and obviate the necessity of autogenous bone grafting. However, studies mainly focused on applying this method to reconstruct minor bone effects, and more investigation concerning the large defects is required. In terms of in situ maxillofacial bone regeneration with the help of CAD-CAM technologies, the present data have suggested feasible mesh rigidity, perseverance of the underlying space, and apt augmentative results with CAD-CAM-based individualized Ti meshes. However, complications, including dehiscence and mesh exposure, coupled with consequent graft loss, infection and impeded regenerative rates have also been reported.

In Vitro Investigation of Gelatin/Polycaprolactone Nanofibers in Modulating Human Gingival Mesenchymal Stromal Cells

The aesthetic constancy and functional stability of periodontium largely depend on the presence of healthy mucogingival tissue. Soft tissue management is crucial to the success of periodontal surgery. Recently, synthetic substitute materials have been proposed to be used for soft tissue augmentation, but the tissue compatibility of these materials needs to be further investigated. This study aims to assess the in vitro responses of human gingival mesenchymal stromal cells (hG-MSCs) cultured on a Gelatin/Polycaprolactone prototype (GPP) and volume-stable collagen matrix (VSCM). hG-MSCs were cultured onto the GPP, VSCM, or plastic for 3, 7, and 14 days. The proliferation and/or viability were measured by cell counting kit-8 assay and resazurin-based toxicity assay. Cell morphology and adhesion were evaluated by microscopy. The gene expression of collagen type I, alpha1 (COL1A1), α-smooth muscle actin (α-SMA), fibroblast growth factor (FGF-2), vascular endothelial growth factor A (VEGF-A), transforming growth factor beta-1 (TGF-β1), focal adhesion kinase (FAK), integrin beta-1 (ITG-β1), and interleukin 8 (IL-8) was investigated by RT-qPCR. The levels of VEGF-A, TGF-β1, and IL-8 proteins in conditioned media were tested by ELISA. GPP improved both cell proliferation and viability compared to VSCM. The cells grown on GPP exhibited a distinct morphology and attachment performance. COL1A1, α-SMA, VEGF-A, FGF-2, and FAK were positively modulated in hG-MSCs on GPP at different investigation times. GPP increased the gene expression of TGF-β1 but had no effect on protein production. The level of ITG-β1 had no significant changes in cells seeded on GPP at 7 days. At 3 days, notable differences in VEGF-A, TGF-β1, and α-SMA expression levels were observed between cells seeded on GPP and those on VSCM. Meanwhile, GPP showed higher COL1A1 expression compared to VSCM after 14 days, whereas VSCM demonstrated a more significant upregulation in the production of IL-8. Taken together, our data suggest that GPP electrospun nanofibers have great potential as substitutes for soft tissue regeneration in successful periodontal surgery.

Physicochemical understanding of biomineralization by molecular vibrational spectroscopy: From mechanism to nature

The process and mechanism of biomineralization and relevant physicochemical properties of mineral crystals are remarkably sophisticated multidisciplinary fields that include biology, chemistry, physics, and materials science. The components of the organic matter, structural construction of minerals, and related mechanical interaction, etc., could help to reveal the unique nature of the special mineralization process. Herein, the paper provides an overview of the biomineralization process from the perspective of molecular vibrational spectroscopy, including the physicochemical properties of biomineralized tissues, from physiological to applied mineralization. These physicochemical characteristics closely to the hierarchical mineralization process include biological crystal defects, chemical bonding, atomic doping, structural changes, and content changes in organic matter, along with the interface between biocrystals and organic matter as well as the specific mechanical effects for hardness and toughness. Based on those observations, the special physiological properties of mineralization for enamel and bone, as well as the possible mechanism of pathological mineralization and calcification such as atherosclerosis, tumor micro mineralization, and urolithiasis are also reviewed and discussed. Indeed, the clearly defined physicochemical properties of mineral crystals could pave the way for studies on the mechanisms and applications.

Evaluation of Bone Repair Using a New Biphasic Synthetic Bioceramic (Plenum® Osshp) in Critical Calvaria Defect in Rats

(1) Background: Biphasic bioceramics are synthetic bone substitutes that provide greater safety and better predictability in guided bone regeneration. This study aimed to evaluate the bone repair process using a new biphasic bioceramic of synthetic origin (Plenum® Osshp-70HA: 30β-TCP) in critical calvarial defects. (2) Methods: seventy-four defects were created in rat calvaria and divided into two groups-Plenum® Osshp (PO), right side, and Straumann® BoneCeramic™ (BC), left side. Euthanasia was performed at 7, 15, 30, and 60 days after surgery. (3) Results: Lower gene expression was observed for runt-related transcription factor 2 (RUNX2) and vascular endothelial growth factor (VEGF) and higher expression for Integrin Binding Sialoprotein (IBSP). The results correlated with moderate immunolabeling for osteocalcin (OCN) and slight immunolabeling for osteopontin (OPN) in the PO group. Histometry showed a greater amount of biomaterial remaining in the PO group at 60 days. The microtomographic analysis showed a lower density of bone connectivity and a greater thickness of the trabeculae for the remnants of the PO group. (4) Conclusions: the Plenum® Osshp showed no differences compared to BoneCeramic™ and is therefore considered an effective option as a synthetic bone substitute in bone regeneration.

Biocomposite-based strategies for dental bone regeneration

OBJECTIVE

Because of the anatomical complexity of the oral and maxillofacial sites, repairing bone defects in these regions is very difficult. This review article aims to consider the application of biocomposites-based strategies for dental bone regeneration.

STUDY DESIGN

Research papers related to the topic, published over the last 20 years, were selected using the Web of Science, Pubmed, Scopus, and Google Scholar databases.

RESULTS

The strategies of monophasic, biphasic/multiphasic scaffolds, and biopolymer-based nanocomposite scaffolds containing nanomaterials compared with traditional methods used for bone regeneration, such as autografts, allografts, xenografts, and alloplasts are found to be superior because of their ability to overcome the issues (e.g., limited bone sources, pain, immune responses, high cost) related to the applications of the traditional methods.

CONCLUSIONS

In addition, additive manufacturing technologies were found to be highly advantageous for improving the efficacy of biocomposite scaffolds for treating dental bone defects.

Sol-Gel Technologies to Obtain Advanced Bioceramics for Dental Therapeutics

The aim of this work is to review the application of bioceramic materials in the context of current regenerative dentistry therapies, focusing on the latest advances in the synthesis of advanced materials using the sol-gel methodology. Chemical synthesis, processing and therapeutic possibilities are discussed in a structured way, according to the three main types of ceramic materials used in regenerative dentistry: bioactive glasses and glass ceramics, calcium phosphates and calcium silicates. The morphology and chemical composition of these bioceramics play a crucial role in their biological properties and effectiveness in dental therapeutics. The goal is to understand their chemical, surface, mechanical and biological properties better and develop strategies to control their pore structure, shape, size and compositions. Over the past decades, bioceramic materials have provided excellent results in a wide variety of clinical applications related to hard tissue repair and regeneration. Characteristics, such as their similarity to the chemical composition of the mineral phase of bones and teeth, as well as the possibilities offered by the advances in nanotechnology, are driving the development of new biomimetic materials that are required in regenerative dentistry. The sol-gel technique is a method for producing synthetic bioceramics with high purity and homogeneity at the molecular scale and to control the surfaces, interfaces and porosity at the nanometric scale. The intrinsic nanoporosity of materials produced by the sol-gel technique correlates with the high specific surface area, reactivity and bioactivity of advanced bioceramics.

Triple-layered scaffold containing cisplatin and curcumin applied for cancerous bone regeneration

Novel drug delivery system was prepared and evaluated as for application in cancerous bone treatment. It had three stacked layers, including a drug-free layer, a cisplatin-loaded layer, and a curcumin-containing layer. Our previously characterized biomaterials, namely Zr-hydroxyapatite (Zr-HA) and alkaline-treated polycaprolactone (modified-PCL), were used as major components of the drug carrier. Polar-polar interactions between cisplatin and Zr-HA were modulated by the modified-PCL included, leading to increase of cisplatin release. Using β-cyclodextrin (β-CD) to entrap curcumin caused improvement of curcumin solubility and release. The 3D-construct was porous with internal interconnected pores according to SEM micrographs. Large amount of apatite was formed and proteins adsorbed on the scaffolds after immersed in physiologic buffer solution and in medium containing fetal bovine serum, respectively. Optimal concentrations of ascorbic acid and triamcinolone were used for induction of bone marrow stromal cells to become osteoblasts by expressing an enzyme marker, e.g., alkaline phosphatase. The prepared scaffolds were considered osteo-conductive and osteo-inductive. The concentrations of cisplatin and curcumin reached the IC50 of SK-ES-1 cells of osteosarcoma and MCF-7 cells of breast adenocarcinoma after 24 h and 3 days of release, respectively. These cancer cells were more sensitive to the combined cisplatin and curcumin than each of the drugs. Regeneration of new bone and execution of residential cancer cells in defected bone were proposed after replacing the lost bone by this established drug carrier. The assumption needs to be verified in the future using animal models.

Experimental study of a 3D-printing technique combined with biphasic calcium phosphates to treat osteonecrosis of the femoral head in a canine model

OBJECTIVE

This study was aimed to use a digital design of 3D-printing technology to create a surgical navigation template. At the same time, biphasic calcium phosphate (BCP) was applied to treat osteonecrosis of the femoral head (ONFH) in animal models, based on accurate positioning of necrotic lesions in the navigation templates and observation of its therapeutic effect.

METHODS

Fifteen healthy adult male and female beagle dogs weighing 20 + 2 kg were randomly divided into three groups (n = 5) after establishing a model of ONFH using the liquid nitrogen freezing method. Each model underwent necrotic lesion creation and BPC implantations on one side of the femoral head and only necrotic lesion creation on the other side of the femoral head. Each group underwent CT examination, gross observation, histological examination and immunohistochemical staining at 6 weeks, 12 weeks and 18 weeks postoperatively.

RESULTS

At weeks 6, 12, and 18, CT and gross examination showed that the necrotic area in the experimental group was basically intact and had been completely raised by BCP material. In the control group, there were signs of bone repair in the femoral head, but there were still large bone defects and cavities. At week 18, extensive collapse of the cartilage surface was observed. Through histological examination, in the experimental group at 12 and 18 weeks, a large number of new and reconstructed bone trabeculae containing a large amount of collagen fibres were observed (P < 0.05), while in the control group, there was extensive necrosis of the bone trabeculae without cellular structural areas. Immunohistochemical examination observation: A large number of CD31-positive cells were observed in the experimental group at 6 weeks, gradually decreasing at 12 and 18 weeks (P < 0.05), while a small number of CD31-positive cells were observed in the control group at 18 weeks.

CONCLUSION

The 3D-printed navigation template can accurately locate ONFH lesions. Implantation of BCP material can effectively play a supporting role, prevent the collapse of the loading surface, and induce bone formation and angiogenesis to some extent.

Materials in the Na2O-CaO-SiO2-P2O5 System for Medical Applications

Calcium phosphate materials and materials based on silicon dioxide have been actively studied for more than 50 years due to their high biocompatibility and bioactivity. Hydroxyapatite and tricalcium phosphate are the most known among calcium phosphate materials, and Bioglass 45S5 is the most known material in the Na2O-CaO-SiO2-P2O5 system. Each of these materials has its application limits; however, some of them can be eliminated by obtaining composites based on calcium phosphate and bioglass. In this article, we provide an overview of the role of silicon and its compounds, including Bioglass 45S5, consider calcium phosphate materials, talk about the limits of each material, demonstrate the potential of the composites based on them, and show the other ways of obtaining composite ceramics in the Na2O-CaO-SiO2-P2O5 system.

Biopolymers and Their Application in Bioprinting Processes for Dental Tissue Engineering

Dental tissues are composed of multiple tissues with complex organization, such as dentin, gingiva, periodontal ligament, and alveolar bone. These tissues have different mechanical and biological properties that are essential for their functions. Therefore, dental diseases and injuries pose significant challenges for restorative dentistry, as they require innovative strategies to regenerate damaged or missing dental tissues. Biomimetic bioconstructs that can effectively integrate with native tissues and restore their functionalities are desirable for dental tissue regeneration. However, fabricating such bioconstructs is challenging due to the diversity and complexity of dental tissues. This review provides a comprehensive overview of the recent developments in polymer-based tissue engineering and three-dimensional (3D) printing technologies for dental tissue regeneration. It also discusses the current state-of-the-art, focusing on key techniques, such as polymeric biomaterials and 3D printing with or without cells, used in tissue engineering for dental tissues. Moreover, the final section of this paper identifies the challenges and future directions of this promising research field.

Efficacy of pure beta tricalcium phosphate graft in dentoalveolar surgery: a retrospective evaluation based on serial radiographic images

BACKGROUND

The use of beta-tricalcium phosphate (beta-TCP) in dental surgery is limited owing to its rapid absorption compared to mixed formulations of hydroxyapatite. However, newly developed pure beta-TCP crystals have demonstrated slow absorption; hence, they last longer within the defect and act as a scaffold until new bone formation. The oral environment is unique and can prove unfavorable for bone grafts due to the high infection rate in the oral cavity and the fragile condition of the oral mucosa. The aim of this study was to evaluate the feasibility of using pure beta-TCP bone grafts in various dental treatments.

METHODS

Panoramic X-ray images of 25 patients who underwent bone grafting during dental surgery were analyzed. A specially treated pure beta-TCP crystal, Neo Bone® (Neo Bone®, SN Biologics Co., Ltd, Seoul, Korea), was used in this study. The bone density at the graft site was compared with that of the surrounding bone using the ImageJ software (Wayne Rasband, NIH USA).

RESULTS

Six months after surgery, the bone graft density was similar to that of the surrounding bone in 20 patients and increased in 5 patients. No adverse effects, such as infection, dehiscence, or graft failure, were observed.

CONCLUSION

The newly developed pure beta-TCP crystal was slowly absorbed and served as support until new bone formation at the defect site, thus demonstrating its potential for use in various oral conditions requiring bone grafting.

Special Issue: Bioceramics, Bioglasses, and Gels for Tissue Engineering

Undoubtedly, biomaterials such as bioceramics, bioactive glasses, and gels have attracted a wide range of research interest in the field of tissue engineering (TE), as they facilitate the essential support and environment for cells to grow, differentiate, and, specifically, regenerate new tissues [...].

From Synthesis to Clinical Trial: Novel Bioinductive Calcium Deficient HA/β-TCP Bone Grafting Nanomaterial

Maxillary sinus augmentation is a commonly used procedure for the placement of dental implants. However, the use of natural and synthetic materials in this procedure has resulted in postoperative complications ranging from 12% to 38%. To address this issue, we developed a novel calcium deficient HA/β-TCP bone grafting nanomaterial using a two-step synthesis method with appropriate structural and chemical parameters for sinus lifting applications. We demonstrated that our nanomaterial exhibits high biocompatibility, enhances cell proliferation, and stimulates collagen expression. Furthermore, the degradation of β-TCP in our nanomaterial promotes blood clot formation, which supports cell aggregation and new bone growth. In a clinical trial involving eight cases, we observed the formation of compact bone tissue 8 months after the operation, allowing for the successful installation of dental implants without any early postoperative complications. Our results suggest that our novel bone grafting nanomaterial has the potential to improve the success rate of maxillary sinus augmentation procedures.

Biomedical applications of chitosan/silk fibroin composites: A review

Natural polymers have been used in the biomedical fields for decades, mainly derived from animals and plants with high similarities with biomacromolecules in the human body. As an alkaline polysaccharide, chitosan (CS) attracts much attention in tissue regeneration and drug delivery with favorable biocompatibility, biodegradation, and antibacterial activity. However, to overcome its mechanical properties and degradation behavior drawbacks, a robust fibrous protein-silk fibroin (SF) was introduced to prepare the CS/SF composites. Not only can CS be combined with SF via the amide and hydrogen bond formation, but also their functions are complementary and tunable with the blending ratio. To further improve the performances of CS/SF composites, natural (e.g., hyaluronic acid and collagen) and synthetic biopolymers (e.g., polyvinyl alcohol and hexanone) were incorporated. Also, the CS/SF composites acted as slow-release carriers for inorganic non-metals (e.g., hydroxyapatite and graphene) and metal particles (e.g., silver and magnesium), which could enhance cell functions, facilitate tissue healing, and inhibit bacterial growth. This review presents the state-of-the-art and future perspectives of different biomaterials combined with CS/SF composites as sponges, hydrogels, membranes, particles, and coatings. Emphasis is devoted to the biological potentialities of these hybrid systems, which look rather promising toward a multitude of applications.

Sinus Augmentation for Implant Placement Utilizing a Novel Synthetic Graft Material with Delayed Immediate Socket Grafting: A 2-Year Case Study

Frequently, sinus augmentation is required when replacing failing or missing molars in the maxilla due to loss of alveolar bone related to periodontal disease, pneumatization of the sinus or a combination of the two factors. Various materials have been advocated and utilized; these fall into the categories of allograft, xenograft and synthetic materials. This article shall discuss a study of 10 cases with a 2-year follow-up utilizing a novel synthetic graft material used for sinus augmentation either simultaneously with implant placement or in preparation for sinus augmentation and implant placement in the posterior maxilla. The results of the 10 cases in the study found consistent results over the 2-year study period with maintenance of the alveolar height at the maxillary sinus. A lack of complications or failures in the study group demonstrates the technique has useful applications in increasing ridge height to permit implant placement inferior to the sinus floor.

Histological and Histomorphometric Evaluation of Implanted Photodynamic Active Biomaterials for Periodontal Bone Regeneration in an Animal Study

Recently, our group developed two different polymeric biomaterials with photodynamic antimicrobial surface activity for periodontal bone regeneration. The aim of the present study was to analyze the biocompatibility and osseointegration of these materials in vivo. Two biomaterials based on urethane dimethacrylate (BioM1) and tri-armed oligoester-urethane methacrylate (BioM2) that additionally contained ß-tricalcium phosphate and the photosensitizer mTHPC (meso-tetra(hydroxyphenyl)chlorin) were implanted in non-critical size bone defects in the femur (n = 16) and tibia (n = 8) of eight female domestic sheep. Bone specimens were harvested and histomorphometrically analyzed after 12 months. BioM1 degraded to a lower extent which resulted in a mean remnant square size of 17.4 mm², while 12.2 mm² was estimated for BioM2 (p = 0.007). For BioM1, a total percentage of new formed bone by 30.3% was found which was significant higher compared to BioM2 (8.4%, p < 0.001). Furthermore, BioM1 was afflicted by significant lower soft tissue formation (3.3%) as compared to BioM2 (29.5%). Additionally, a bone-to-biomaterial ratio of 81.9% was detected for BioM1, while 8.5% was recorded for BioM2. Implantation of BioM2 caused accumulation of inflammatory cells and led to fibrous encapsulation. BioM1 (photosensitizer-armed urethane dimethacrylate) showed favorable regenerative characteristics and can be recommended for further studies.

Facts to Consider in Developing Materials That Emulate the Upper Jawbone: A Microarchitecture Study Showing Unique Characteristics at Four Different Sites

The maxilla is generally acknowledged as being more trabecular than the mandible. Allograft currently available for use in the maxillofacial region is harvested from the hip and long bones, irrespective of their local characteristics, and grafted onto the jawbones. Other alternative are autograft or commercially available bone substitutes. Due to their inherent differences, an in-depth understanding of the bone microarchitecture is important to develop the most compatible graft for use at the maxilla. This cross-sectional study aimed to determine the microstructures of bone harvested from different sites of the maxilla, to be used for standard setting. Forty-nine specimens from seven human cadavers were harvested from the zygomatic buttress, anterior maxillary sinus wall, anterior nasal spine and anterior palate. Each bone block, measuring of 10 mm × 5 mm, was harvested using rotary instruments. Bone analysis was performed following micro-computed tomography to obtain trabecular number (Tb.N), trabecular separation (Tb.Sp), trabecular thickness (Tb.Th), and bone volume fraction (BV/TV). There were site-related differences, with BV/TV that ranged between 37.38% and 85.83%. The Tb.N was the lowest at the palate (1.12 (mm−1)) and highest at the anterior maxillary sinus wall (1.41 (mm−1)) region. The palate, however, had the highest trabecular separation value (Tb.Sp) at 0.47 mm. The TB.Th was the lowest at the anterior nasal spine (0.34 mm) but both the zygoma and anterior maxillary sinus regions shared the highest Tb.Th (0.44 mm). Except for having the lowest Th.Sp (0.35 mm), the anterior maxillary sinus wall consistently showed higher values together with the zygomatic buttress in all other parameters. Concurring with current clinical practice of harvesting autograft from the zygomatic buttress and anterior maxillary sinus wall, their bony characteristic serve as the microarchitecture standard to adopt when developing new bone graft materials for use in the maxilla.

Novel coatings for the continuous repair of human bone defects

Bone defects are the second most common tissue grafts after blood. However, bone grafts face several problems, such as bone scaffolds, which have low bioactivity and are prone to corrosion. Much of the current research on bone scaffolds is focused on the mechanical aspects such as structure and strength. Surface modification of the bone scaffold is carried out in terms of the mechanical structure or structural design of the bone scaffold with reference to a bionic structure. However, with the development of mechanical designs, materials science, and medicine, many studies have reported that promoting bone growth by modifying the structure of the scaffold or coating is not possible. Therefore, the application of a bioactive coating to the surface of the bone scaffold is particularly important to generate a synergistic effect between the structure and active coating. In this article, we present several perspectives to improve the bioactivity of bone scaffolds, including corrosion resistance, loading of bioactive coatings or drugs on bone scaffolds, improved adhesion to the surface of the bone scaffolds, immune response modulation, and drawing on bionic structures during manufacturing.

Combined Application of Dentin Noncollagenous Proteins and Odontogenic Biphasic Calcium Phosphate in Rabbit Maxillary Sinus Lifting

BACKGROUND

Teeth can be used as a raw material for preparing bone substitutes due to their similar chemical composition to bone. The objective of our study was to evaluate the effect of odontogenic biphasic calcium phosphate (BCP) incorporating dentin noncollagenous proteins (DNCPs) on osteogenesis and stability in maxillary sinus augmentation.

METHODS

The composition, structure and morphology of the odontogenic BCP were tested by X-ray powder diffraction (XRD), Brunauer-Emmett-Teller, and scanning electron microscopy methods. The biocompatibility and osteoinduction of DNCPs and materials were examined in vitro and their bone regeneration capacity was verified in vivo.

RESULTS

The results showed that the cells adhered and proliferated well on the DNCP-loaded BCP scaffold. The odontogenic BCP and DNCPs promoted osteogenic differentiation of cells, The new bone formation in the BCP groups and DNCP subgroups was significantly higher than the new bone formation in the control, and the new bone quality was better. The bone regeneration effect of odontogenic BCP was similar to the effect of deproteinized bovine bone mineral, but β-TCP did not maintain the height and volume of bone reconstruction.

CONCLUSION

In conclusion, the combined application of DNCPs and odontogenic BCP is an effective strategy for tissue engineering osteogenesis in the maxillary sinus region. The biomimetic strategy could provide a new approach for patients requiring maxillary sinus lifting.

Effect of L-Glutamic Acid on the Composition and Morphology of Nanostructured Calcium Phosphate as Biomaterial

Calcium phosphate (CaP) with several chemical compositions and morphologies was prepared by precipitation using aqueous solutions of L-Glutamic acid (H2G) and calcium hydroxide, both mixed together with an aqueous solution (0.15 M) of phosphoric acid. Plate-shaped dicalcium phosphate dihydrate (brushite) particles were obtained and identified at a lower concentration of the solution of the reactants. The Ca/P ratio deduced by EDS was ~1, as expected. The nanoscale dimension of carbonate apatite and amorphous calcium phosphate, with variable Ca/P ratios, were revealed by X-ray diffraction (XRD) and scanning electron microscopy and energy dispersive X-ray spectroscopy analysis (SEM-EDS). They were characterized in medium and high concentrations of calcium hydroxide (0.15 M and 0.20 M). The equilibria involved in all the reactions in aqueous solution were determined. The thermodynamic calculations showed a decrease in the amount of chelate complexes with an increase in pH, being the opposite of [CaPO4-] and [CaHG+]. This fluctuation showed an evident influence on the morphology and polymorphism of CaP particles obtained under the present experimental conditions, with potential use as a biomaterial.

Performance of Polydioxanone-Based Membrane in Association with 3D-Printed Bioceramic Scaffolds in Bone Regeneration

This study evaluated the bioactivity of 3D-printed β-tricalcium phosphate (β-TCP) scaffolds or hydroxyapatite (HA) scaffolds associated with polydioxanone (PDO) membrane (Plenum^® Guide) for guided bone regeneration in rats. Fifty-four rats were divided into three groups (n = 18 animals): autogenous bone + PDO membrane (Auto/PG); 3D-printed β-TCP + PDO membrane (TCP/PG); and 3D-printed HA + PDO membrane (HA/PG). A surgical defect in the parietal bone was made and filled with the respective scaffolds and PDO membrane. The animals were euthanized 7, 30, and 60 days after the surgical procedure for micro-CT, histomorphometric, and immunolabeling analyses. Micro-CT showed an increase in trabecular thickness and a decrease in trabecular separation, even with similar bone volume percentages between TCP/PG and HA/PG vs. Auto/PG. Histometric analysis showed increased bone formation at 30 days in the groups compared to 7 days postoperatively. Immunolabeling analysis showed an increase in proteins related to bone formation at 30 days, and both groups showed a similar immunolabeling pattern. This study concludes that 3D-printed scaffolds associated with PDO membrane (Plenum^® Guide) present similar results to autogenous bone for bone regeneration.

Biominerals Added Bioresorbable Calcium Phosphate Loaded Biopolymer Composites

Nanocrystalline calcium phosphate (CP) bioceramic coatings and their combination with biopolymers are innovative types of resorbable coatings for load-bearing implants that can promote the integration of metallic implants into human bodies. The nanocrystalline, amorphous CP particles are an advantageous form of the various calcium phosphate phases since they have a faster dissolution rate than that of crystalline hydroxyapatite. Owing to the biomineral additions (Mg, Zn, Sr) in optimized concentrations, the base CP particles became more similar to the mineral phase in human bones (dCP). The effect of biomineral addition into the CaP phases was thoroughly studied. The results showed that the shape, morphology, and amorphous characteristic slightly changed in the case of biomineral addition in low concentrations. The optimized dCP particles were then incorporated into a chosen polycaprolactone (PCL) biopolymer matrix. Very thin, non-continuous, rough layers were formed on the surface of implant substrates via the spin coating method. The SEM elemental mapping proved the perfect incorporation and distribution of dCP particles into the polymer matrix. The bioresorption rate of thin films was followed by corrosion measurements over a long period of time. The corrosion results indicated a faster dissolution rate for the dCP-PCL composite compared to the dCP and CP powder layers.

[Synthetic bone replacement substances]

Bone substitute materials have been successfully used for bone defects in orthopedics and trauma surgery for a long time; however, there are cases, especially in bone defects with a critical size, in which the treatment is complicated. Nowadays, multiple bone substitute materials are available. Autologous cancellous bone grafts remain the gold standard among the bone replacement materials; however, donor site morbidity and the limited availability of autologous cancellous bone represent restrictions for autologous bone grafting. Allogeneic cancellous bone grafts have also been successfully for years in the treatment of bone defects; however, infection rates of more than 10% have been described for the use of allogeneic cancellous bone. By introducing synthetic bone substitutes further alternatives are currently available to the user for the individual treatment of bone defects. The aim of this study is to demonstrate the advantages and disadvantages of various synthetic bone substitute materials.

Nanocrystalline hydroxyapatite in periodontal bone regeneration: A systematic review

Background

Periodontal diseases when persistent, results in periodontal pockets, attachment loss and progressive destruction of the alveolar bone. Grafting periodontal bone defects with bone substitute biomaterials has proven clinical success for accomplishing reconstruction of lost attachment apparatus, especially in deep intra-bony defects. Nanoparticles (NPs) have been considered indispensable in the future of health sciences and NP based alloplastic graft materials such as nanocrystalline hydroxyapatite (NCHA) hold great promise for regeneration of periodontal defects. Therefore the aim of this review is to evaluate the role of NCHA as an effective substitute for periodontal bone regeneration.

Material & methods

Popular scientific databases such as PubMed (Medline), Cochrane database of clinical trials, Scopus (Elsevier), Web of science (Clarivate Analytics) and Google Scholar, were searched. The literature search was restricted to published reports in English, between January 2000 and December 2021. Database search returned 1227 results which were screened based on title, author names and publication dates.

Results

Data from the 14 included studies were reviewed and tabulated. In the present review, all the studies reported using commercially available NCHA for periodontal bone regeneration.

Conclusion

NCHA is a suitable bone substitute material for periodontal bone regeneration, with outcomes comparable to that of conventionally used graft materials such as bovine xenograft and other synthetic alloplastic materials. While grafting with NCHA in intrabony periodontal defects, after any form of periodontal flap surgery or debridement, significantly improves bone regeneration by 6 months, addition of adjuncts like EMD and PRF further enhance the outcomes.

Periodontal Therapy Using Bioactive Glasses: A Review

This paper reviews the use of bioactive glasses as materials for periodontal repair. Periodontal disease causes bone loss, resulting in tooth loosening and eventual tooth loss. However, it can be reversed using bioactive glass, typically the original 45S5 formulation (Bioglass®) at the defect site. This is done either by plcing bioactive glass granules or a bioactive glass putty at the defect. This stimulates bone repair and causes the defect to disappear. Another use of bioactive glass in periodontics is to repair so-called furcation defects, i.e., bone loss due to infection at the intersection of the roots in multi-rooted teeth. This treatment also gives good clinical outcomes. Finally, bioactive glass has been used to improve outcomes with metallic implants. This involves either placing bioactive glass granules into the defect prior to inserting the metal implant, or coating the implant with bioactive glass to improve the likelihood of osseointegration. This needs the glass to be formulated so that it does not crack or debond from the metal. This approach has been very successful, and bioactive glass coatings perform better than those made from hydroxyapatite.

Effect of chitosan/inorganic nanomaterial scaffolds on bone regeneration and related influencing factors in animal models: A systematic review

Bone tissue engineering (BTE) provides a promising alternative for transplanting. Due to biocompatibility and biodegradability, chitosan-based scaffolds have been extensively studied. In recent years, many inorganic nanomaterials have been utilized to modify the performance of chitosan-based materials. In order to ascertain the impact of chitosan/inorganic nanomaterial scaffolds on bone regeneration and related key factors, this study presents a systematic comparison of various scaffolds in the calvarial critical-sized defect (CSD) model. A total of four electronic databases were searched without publication date or language restrictions up to April 2022. The Animal Research Reporting of In Vivo Experiments 2.0 guidelines (ARRIVE 2.0) were used to assess the quality of the included studies. Moreover, the risk of bias (RoB) was evaluated via the Systematic Review Center for Laboratory Animal Experimentation (SYRCLE) tool. After the screening, 22 studies were selected. None of these studies achieved high quality or had a low RoB. In the available studies, scaffolds reconstructed bone defects in radically different extensions. Several significant factors were identified, including baseline characteristics, physicochemical properties of scaffolds, surgery details, and scanning or reconstruction parameters of micro-computed tomography (micro-CT). Further studies should focus on not only improving the osteogenic performance of the scaffolds but also increasing the credibility of studies through rigorous experimental design and normative reports.

Calcium Phosphate-Based Biomaterials for Bone Repair

Traumatic, tumoral, and infectious bone defects are common in clinics, and create a big burden on patient's families and society. Calcium phosphate (CaP)-based biomaterials have superior properties and have been widely used for bone defect repair, due to their similarities to the inorganic components of human bones. The biological performance of CaPs, as a determining factor for their applications, are dependent on their physicochemical properties. Hydroxyapatite (HAP) as the most thermally stable crystalline phase of CaP is mostly used in the form of ceramics or composites scaffolds with polymers. Nanostructured CaPs with large surface areas are suitable for drug/gene delivery systems. Additionally, CaP scaffolds with hierarchical nano-/microstructures have demonstrated excellent ability in promoting bone regeneration. This review focuses on the relationships and interactions between the physicochemical/biological properties of CaP biomaterials and their species, sizes, and morphologies in bone regeneration, including synthesis strategies, structure control, biological behavior, and the mechanisms of CaP in promoting osteogenesis. This review will be helpful for scientists and engineers to further understand CaP-based biomaterials (CaPs), and be useful in developing new high-performance biomaterials for bone repair.

Polymeric biomaterials in the treatment of posterior segment diseases

Polymeric biomaterials are biological or synthetic substances which can be engineered to interact with biological systems for the diagnosis or treatment of diseases. These biomaterials have immense potential for treating eyes diseases, particularly the retina—a site of many inherited and acquired diseases. Polymeric biomaterials can be engineered to function both as an endotamponade agent and to prevent intraocular scarring in retinal detachment repair surgeries. They can also be designed as a drug delivery platform for treatment of retinal diseases. Finally, they can be used as scaffolds for cellular products and provide non-viral gene delivery solutions to the retina. This perspective article explains the role of polymeric biomaterials in the treatment of retinal conditions by highlighting recent advances being translated to clinical practice. The article will also identify potential hurdles to clinical translation as future research directions in the field.

Osteoconductive Silk Fibroin Binders for Bone Repair in Alveolar Cleft Palate: Fabrication, Structure, Properties, and In Vitro Testing

Osteoconductive silk fibroin (SF) binders were fabricated for the bone repair of an alveolar cleft defect. Binders were prefigureared by mixing different ratios of a mixture of random coils and SF aggregation with SF fibrils: 100:0 (SFB100), 75:25 (SFB75), 50:50 (SFB50), 25:75 (SFB25), and 0:100 (SFB0). The gelation, molecular organization, structures, topography, and morphology of the binders were characterized and observed. Their physical, mechanical, and biological properties were tested. The SF binders showed gelation via self-assembly of SF aggregation and fibrillation. SFB75, SFB50, and SFB25 had molecular formation via the amide groups and showed more structural stability than SFB100. The morphology of SFB0 demonstrated the largest pore size. SFB0 showed a lowest hydrophilicity. SFB100 showed the highest SF release. SFB25 had the highest maximum load. SFB50 exhibited the lowest elongation at break. Binders with SF fibrils showed more cell viability and higher cell proliferation, ALP activity, calcium deposition, and protein synthesis than without SF fibrils. Finally, the results were deduced: SFB25 demonstrated suitable performance that is promising for the bone repair of an alveolar cleft defect.

Biomedical Membrane of Fish Collagen/Gellan Gum Containing Bone Graft Materials

The development of a guided bone regeneration (GBR) membrane with non-mammalian fish collagen has the advantage of low risk for transmission of infectious diseases in tissue regeneration. In this work, a fish collagen/gellan gum and bone graft material (FC/GG-BGM) composite GBR membrane were fabricated through solution blending and casting procedures in a vacuum. The membranes were characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy observation (SEM), and atomic force microscope (AFM) analyses. FT-IR results suggested that ionic interactions were formed between FC and GG both in composite powder and membranes. In vivo experiments showed that these FC/GG-BGM composite membranes could generate osteoblast minerals and promote loose bone calcification, thus accelerating bone regeneration. At 2 weeks, the defected site of rats treated with FC/GG-BGM membrane (0.377 ± 0.012 mm3) showed higher regeneration than that of rats treated with the bovine collagen membrane (0.290 ± 0.015 mm3) and control rats without membrane (0.160 ± 0.008 mm3). Compared with bovine collagen membrane, the FC/GG-BGM composite membrane displays better bone regeneration ability. Therefore, FC/GG-BGM composite membrane is suitable as a GBR membrane for bone regeneration.

The Application of Beta-Tricalcium Phosphate in Implant Dentistry: A Systematic Evaluation of Clinical Studies

The demand for synthetic graft materials in implant dentistry is rising. This systematic review aims to evaluate the survival rate of dental implants placed simultaneously with bone regeneration procedures using the material β-tricalcium phosphate, one of the most promising synthetic graft materials. The electronic search was conducted in PubMed, Scielo, and the Cochrane Central Register of Controlled Trials. Five randomized clinical trials, one non-randomized controlled clinical trial and four observational studies without control group were include. Implant survival rate and other clinical, radiographic, and histological parameters did not differ from those of implants placed simultaneously with another type of graft material, or placed in blood clots or natural alveolar ridges. Based on the available literature, β-tricalcium phosphate seems to be a promising graft material in implant dentistry. Nevertheless, more randomized clinical trials, with long follow-up periods, preoperative and postoperative CBCT, and histological analysis, are necessary to assess its long-term behavior.