The Influence of the Affinity between Aggregate and Bitumen on the Mechanical Performance Properties of Asphalt Mixtures

Experimental Study on the Physicochemical Properties of Asphalt Modified by Different Anti-Stripping Agents and Their Moisture Susceptibility with Aggregates

Erosion and the stripping effect of moisture on asphalt mixtures is one of the main reasons for the shortened service life of asphalt pavements. The common mean of preventing asphalt pavements from being damaged by moisture is adding anti-stripping agents (ASAs) to asphalt mixtures. However, the effect regularity and mechanism of anti-stripping agents on the physicochemical properties of asphalt is not exactly defined. This study compared the physical properties of ASA-modified asphalt (AMAs) to determine the optimal dosage and investigated the rheological and adhesion properties. Based on the roller bottle method and water immersion method, the moisture susceptibility of AMAs with three particle sizes was investigated. The results showed that the modification of asphalt using anti-stripping agents was a physical modification. At the optimum dosage of anti-stripping agents (0.3%), the basic physical properties of AMA1 were the most desirable. ASA2 increased the resistance of asphalt for deformation at high temperature by 46%, and AMA3 had the best low-temperature performance. ASAs enhanced the dispersed and polar components in the asphalt binder, improving the adhesion energy of asphalt. AMA3 had the strongest adhesion to the aggregate, with an increase in adhesion work by 2.8 times and a 45% of increase in ER value. This was attributed to ASA3 containing with a large number of metal cations and polar functional groups. It was shown that ASAs provided the most improvement in the anti-stripping performance of asphalt mixtures with 9.5-13.2 mm particles. The amide ASA, phosphate ASA and aliphatic amine ASA improved the water damage resistance of asphalt by 65%, 45% and 78%, respectively. This study can help engineers realize the effects of different types of ASAs on the physicochemical properties of asphalt and select the most suitable type of ASAs according to the service requirements.

Paving roads with recycled plastics: Microplastic pollution or eco-friendly solution?

Although plastic-modified roads are a promising approach to reducing the amount of landfilled and incinerated plastic and improving asphalt pavement performance, the contribution of plastic-modified roads to microplastic pollution is unknown. This study aimed to develop a new abrasion procedure to quantify the release of microplastics from recycled plastic-modified asphalt depending on environmental factors, the type and content of plastic used, and the incorporation method in bitumen/asphalt. A Wet Track Abrasion machine was used to simulate road traffic abrasion on a plastic-modified asphalt sample, and a novel microplastic extraction procedure was designed to extract the generated microplastics. Incorporating recycled plastic as a polymer modifier in the bitumen matrix resulted in an early release of microplastics compared to its addition as a synthetic aggregate substitute in the asphalt mix. Cold temperatures and low pH values favoured the generation of microplastics from plastic-modified asphalt. Due to the lack of universal thresholds for the release of microplastics into the environment, environmental agencies and local authorities could benefit from this novel laboratory-based microplastic assessment procedure to foster the sustainable use of recycled plastic in roads.