CO2 Methanation: Nickel-Alumina Catalyst Prepared by Solid-State Combustion

Cobalt-Imidazole Complexes: Effect of Anion Nature on Thermochemical Properties

A solvent-free method was proposed for the synthesis of hexaimidazolecobalt(II) nitrate and perchlorate complexes-[Co(C3H4N2)6](NO3)2 and [Co(C3H4N2)6](ClO4)2-by adding cobalt salts to melted imidazole. The composition, charge state of the metal, and the structure of the resulting complexes were confirmed by elemental analysis, XPS, IR spectroscopy, and XRD. The study of the thermochemical properties of the synthesized complexes showed that [Co(C3H4N2)6](NO3)2 and [Co(C3H4N2)6](ClO4)2 are thermally stable up to 150 and 170 °C, respectively. When the critical temperature of thermal decomposition is reached, oxidative two-stage gasification is observed. In this case, the organic component of the [Co(C3H4N2)6](NO3)2 complex undergoes almost complete gasification to form Co3O4 with a slight admixture of CoO, which makes it attractive as a component of gas-generation compositions, like airbags.

CO2 Methanation: Solvent-Free Synthesis of Nickel-Containing Catalysts from Complexes with Ethylenediamine

CO₂ methanation was studied in the presence of nickel catalysts obtained by the solid-state combustion method. Complexes with a varying number of ethylenediamine molecules in the coordination sphere of nickel were chosen as the precursors of the active component of the catalysts. Their synthesis was carried out without the use of solvents, which made it possible to avoid the stages of their separation from the solution and the utilization of waste liquids. The composition and structure of the synthesized complexes were confirmed by elemental analysis, IR spectroscopy, powder XRD and XPS methods. It was determined that their thermal decomposition in the combustion wave proceeds in multiple stages with the formation of NiO and Ni(OH)₂, which are reduced to Ni⁰. Higher ethylenediamine content in the complex leads to a higher content of metal in the solid products of combustion. However, different ratios of oxidized and reduced forms of nickel do not affect the initial activation temperature of nickel catalysts in the presence of CO₂. It was noted that, after activation, the sample obtained from [Ni(C₂H₈N₂)₂](NO₃)₂ exhibited the highest activity in CO₂ methanation. Thus, this complex is a promising precursor for CO₂ methanation catalysts, and its synthesis requires only a small amount of ethylenediamine.

Molecular Dynamics Study on Structure, Vibrational Properties, and Transport Coefficients of Liquid Alumina

The structure, vibrational density of states, and transport coefficients of liquid alumina were studied using molecular dynamics simulations. At the temperature of 2500 K, 3000 K, 3500 K, and 4000 K, systems with three different densities were constructed, respectively, including the configurations with densities of 2.81 g/cm³ and 3.17 g/cm³, and the relaxed ones with nearly zero pressure at each temperature. With the changes in temperature or density, the transformations on the structural, vibrational and transport properties were discussed. The Born-Mayer-Huggins type of atomic interactions was used, with newly optimized parameters. The analysis of the interatomic correlations indicated that the short-range order of liquid alumina was mainly constructed by AlO₄ tetrahedra, also a certain number of AlO₃ and AlO₅ was present. Meanwhile, the structural transitions on the elemental units occurred as either the temperature or density increased. Two primary frequency bands were observed in each vibrational density of states spectrum, with the higher frequency bands produced by the O atom vibrations, and the lower frequency ones generated by the Al atom vibrations. Self-diffusion coefficients were estimated using the linear behavior of the mean-squared displacement at long time, while by using the Green-Kubo relation during equilibrium molecular dynamics simulations, thermal conductivities and viscosities were calculated. Significantly, the viscosity at 2500 K with a density of 2.81 g/cm³ was equal to 25.23 mPa s, which was very close to the experimental finding.

Development and Future Scope of Renewable Energy and Energy Storage Systems

 This review study attempts to summarize available energy storage systems in order to accelerate the adoption of renewable energy. Inefficient energy storage systems have been shown to function as a deterrent to the implementation of sustainable development. It is therefore critical to conduct a thorough examination of existing and soon-to-be-developed energy storage technologies. Various scholarly publications in the fields of energy storage systems and renewable energy have been reviewed and summarized. Data and themes have been further highlighted with the use of appropriate figures and tables. Case studies and examples of major projects have also been researched to gain a better understanding of the energy storage technologies evaluated. An insightful analysis of present energy storage technologies and other possible innovations have been discovered with the use of suitable literature review and illustrations. This report also emphasizes the critical necessity for an efficient storage system if renewable energy is to be widely adopted. 

Mononuclear Transition Metal Cymantrenecarboxylates as Precursors for Spinel-Type Manganites

Novel mononuclear cymantrenecarboxylate complexes of transition metals, [Co(H₂O)₆](CymCO₂)₂·4H₂O (Cym = (η⁵-C₅H₄)Mn(CO)₃) (1), [Ni(H₂O)₆](CymCO₂)₂·4H₂O (2), [Zn(H₂O)₆](CymCO₂)₂·4H₂O (3), [Co(CymCO₂)₂(imz)₂] (imz = imidazole, 4), [Co(CymCO₂)₂(bpy)₂]·2PhMe (bpy = 2,2′-bipyridyl, 5), [Ni(CymCO₂)(bpy)₂(H₂O)][CymCO₂]·0.5MePh·2H₂O (6), [Cu(CymCO₂)₂(imz)₂] (7), and [Cu(CymCO₂)₂(bpy)(H₂O)] (8), were obtained and characterized by single-crystal X-ray analysis. Complexes 1–3 are isostructural. Magnetism of the Co complexes 1, 4, and 5 was studied; it was shown that they exhibit the properties of field-induced single-molecule magnets with magnetization reversal barriers (ΔE/k_B) of 44, 13, and 10 K, respectively. Thermal decomposition of complexes 1–8 was studied by means of DSC and TGA methods. The final products of thermolysis of 1–6 in air, according to powder XRD data, are the pure spinel phases MMn₂O₄; for the cases of copper complexes, the mixtures of CuMn₂O₄ and CuO were found in the products.

Solvent-Free Method for Nanoparticles Synthesis by Solid-State Combustion Using Tetra(Imidazole)Copper(II) Nitrate

The development of solvent-free techniques for nanoparticles synthesis is one of the challenges of Green chemistry. In this work, the principled opportunity to obtain copper-containing nanosized particles without use of any solvents was shown. The copper complexes were prepared as precursors by the melting-assisted solvent-free synthesis. The formation of tetra(imidazole)copper(II) nitrate complex was confirmed by XRD, elemental analysis, FTIR spectroscopy, and thermal analysis. It was noted that their thermal decomposition occurs in two stages: (I) the low-temperature step may be related to redox interaction between organic ligands and nitrate-anions; (II) the high-temperature step may be related to the oxidation of the products of incomplete imidazole decomposition. TEM and XRD studies of solid products of complex combustion have shown that they are oxides with particle size less than 40 nm. Thus, the combustion of [Cu(Im)4](NO3)2 complex under air can be considered as a new approach to prepare nanosized particles of copper oxides without the use of solvents.

New Solvent-Free Melting-Assisted Preparation of Energetic Compound of Nickel with Imidazole for Combustion Synthesis of Ni-Based Materials

In this work two approaches to the synthesis of energetic complex compound Ni(Im)₆(NO₃)₂ from imidazole and nicklel (II) nitrate were applied: a traditional synthesis from solution and a solvent-free melting-assisted method. According to infrared spectroscopy, X-ray diffraction, elemental and thermal analysis data, it was shown that the solvent-free melt synthesis is a faster, simpler and environmentally friendly method of Ni(Im)₆(NO₃)₂ preparation. The results show that this compound is a promising precursor for the production of nanocrystalline Ni-NiO materials by air-assisted combustion method. The combustion of this complex together with inorganic supports makes it possible to synthesize supported nickel catalysts for different catalytic processes.