Evolution of Hydraulic Conductivity of Unsaturated Compacted Na-Bentonite under Confined Condition-Including the Microstructure Effects

Insight on the Swelling Pressure-Suction Relationship of Compacted Bentonite during Hydration

Investigation of the swelling pressure of buffer/backfill materials is a critical aspect in the design of high-level radioactive waste (HLW) disposal repositories. In this study, to clarify the swelling pressure-suction relation for compacted bentonite upon the hydration path, constant-volume swelling pressure tests with suction control were conducted. The swelling pressure-suction curves indicated that the swelling pressure of the specimens increased significantly with increasing dry density, while the shape of the curves during hydration depended on the dry density. Moreover, the swelling pressure-suction curves exhibited a distinction between unsaturated and saturated segments divided by the critical saturated state (CSS) curve, which proves the unique existence of a CSS curve in the stress space independent of the stress path. With the introduction of the CSS curve into the s-p space, the conventional stress space of unsaturated soil could expand to that of unsaturated expansive soil. The results obtained in this study could provide the mechanical parameters for the construction of disposal repositories. In addition, the stress space with CSS curve proposed in this study provides a new approach to building constitutive models of bentonite materials.

Insight on the Void Ratio-Suction Relationship of Compacted Bentonite during Hydration

Investigation on swelling characteristics of buffer/backfill materials during hydration is an important issue in the design of artificial barriers in high-level radioactive waste (HLW) disposal repositories. In this work, for clarifying the characteristic of void ratio–suction relationship for compacted bentonite on hydration path, suction-controlled swelling deformation tests under constant vertical stresses 0.001~40 MPa were carried out on compacted bentonite specimens. Four different types of void ratio-suction curves indicated that swelling-collapse behavior under hydration depends on suction and over-consolidation ratio (OCR), based on which the swelling index was defined. Then, equations were proposed for describing the swelling-collapse characteristic of void ratio–suction curves. Simulation results of suction-controlled swelling deformation tests show that the different types of the hydration deformation curves could be well described by the proposed equations. Obviously, the proposed equations could be used for description and prediction of swelling characteristics of compacted bentonite during hydration, which is also of great importance for the safety assessment of the HLW repositories.

Study on Preparation of Polymer-Modified Bentonite and Sand Mixtures Based on Osmotic Pressure Principle

Polymer-modified bentonite and sand mixtures (PMBS) are widely used in the engineering field due to their low cost and low permeability. In this study, different ionic types of polyacrylamides were used to modify bentonite to improve its swelling properties and impermeability. The physicochemical properties of polymer-modified bentonite were characterized by X-ray diffraction, particle size distribution, IR spectroscopy, SEM, and free swell index (FSI) to further demonstrate the successful organic modification of bentonite. To investigate the impermeability mechanism of PMBS from the perspective of osmotic pressure, the colloidal osmotic pressure of bentonite and hydraulic conductivity were compared. The results showed that anionic polyacrylamide (APAM) had the most obvious improvement on the swelling properties of bentonite, and 3% APAM increased the FSI of bentonite from 15 mL/2 g to 41 mL/2 g. With the increase in polymer dosage, the colloidal osmotic pressure of bentonite increased and the hydraulic conductivity of PMBS decreased significantly. The interior of PMBS is equivalent to a highly concentrated bentonite–sand–water system. When the colloidal osmotic pressure in the restricted space is higher than the external hydraulic pressure, it will prevent infiltration from occurring. When the external hydraulic pressure exceeds the high concentration of bentonite colloid osmotic pressure, the hydraulic conductivity may increase rapidly. Therefore, the impermeability of PMBS depends on the colloidal osmotic pressure of bentonite. Finally, it was confirmed that PMBS had a self-healing capacity by simulating damage to PMBS.