Fabrication, Structure, Performance, and Application of Graphene-Based Composite Aerogel

Recent Progress in MOF-Aerogel Fabrication and Applications

Recent advancements in metal-organic frameworks (MOFs) underscore their significant potential in chemical and materials research, owing to their remarkable properties and diverse structures. Despite challenges like intrinsic brittleness, powdered crystalline nature, and limited stability impeding direct applications, MOF-based aerogels have shown superior performance in various areas, particularly in water treatment and contaminant removal. This review highlights the latest progress in MOF-based aerogels, with a focus on hybrid systems incorporating materials like graphene, carbon nanotube, silica, and cellulose in MOF aerogels, which enhance their functional properties. The manifold advantages of MOF-based aerogels in energy storage, adsorption, and catalysis are discussed, with an emphasizing on their improved stability, processability, and ease of handling. This review aims to unlock the potential of MOF-based aerogels and their real-world applications. Aerogels are expected to reshape the technological landscape of MOFs through enhanced stability, adaptability, and efficiency.

Current insights and future prospects of graphene aerogel-enhanced supercapacitors: A systematic review

Supercapacitors present a compelling alternative to conventional batteries, offering rapid energy storage and high power density. Despite their advantages, they typically fall short in energy density compared to traditional batteries, primarily due to limitations in electrode materials. Graphene Aerogels (GA) have emerged as a promising solution to enhance supercapacitor performance because of their unique properties, such as high surface area and excellent conductivity. This systematic review provides a comprehensive analysis of recent advancements in GA technology, focusing on their synthesis methods and applications in supercapacitors. It highlights significant improvements that GA can bring to Electric Double-Layer Capacitors (EDLCs), pseudocapacitors, and hybrid supercapacitors. Additionally, the review explores GA's potential for enhancing electric generators and integrating into flexible, wearable technologies. Future research directions are emphasised, particularly regarding GA's potential applications in waste management and environmental protection. The review was conducted through a thorough literature search, prioritising peer-reviewed sources related to GA synthesis and supercapacitor applications. Methodological quality and potential biases of the included studies were assessed using principles similar to the Cochrane Risk of Bias tool. Thematic analysis was employed to synthesise findings and identify key trends and challenges. Limitations such as potential biases and methodological variations are discussed. Overall, this review highlights the technological prospects of GA and provides guidance for future research in supercapacitor development and applications.

Aptamer and sodium alginate decorated graphene oxide composite material with ion responsiveness for Low-density lipoprotein trapping

The accumulation of excess Low-density lipoprotein (LDL) is strongly associated with the occurrence of heart failure, coronary artery disease and hypercholesterolaemia, and is a major factor in cardiovascular and cerebrovascular disease. Concerns about the ways to decrease LDL level have continuously arisen. In this study, an ionic stimulation-responsive composite (i.e., GO@Apt@SA) is prepared with modification of graphene oxide (GO) utilising LDL-aptamer (Apt) and sodium alginate (SA). The ion-responsive behaviour of GO@Apt@SA synergistically interacts with the specific recognition property of the aptamer, enabling adsorption of LDL with higher capacity and specificity. Under the optimal experimental conditions, the maximum adsorption capacity of GO@Apt@SA for LDL is 730.6 μg mg-1. Interestingly, the aptamer complementary chain could trigger the release of LDL with favourable elution efficiency, which competitively binds with LDL-specific aptamer to trigger LDL release. More importantly, GO@Apt@SA exhibits satisfactory adsorption performances for LDL in goat serum, meaning that the composite material and technology are available for the extraction of LDL from complex sample matrices.

Porous chlorine-functionalized covalent organic framework anchored graphene aerogel composite for synergically enhanced solid phase microextraction of polychlorinated naphthalene in environmental water

The residues of polychlorinated naphthalenes (PCNs) produced in multiple industrial production and life processes are continuously entering environmental waters through atmospheric deposition and land drainage, and the water pollution caused by PCNs is continuing public concern due to their potential threat to aquatic ecosystems and public health. Herein, a new chlorine-functionalized covalent organic framework anchored graphene aerogel (COF-GA) was synthesized by covalent modification technology and used as fiber coating of solid-phase microextraction for synergically enhanced extraction of PCNs in environmental water. The extraction efficiency of COF-GA coated fiber was superior to commercial fiber due to the multiple interactions (π-π, hydrophobic interaction, and halogen bonding interaction). The COF-GA coated fiber has good stability, can avoid water vapor interference at 80 °C for a long time (30 -50 min) to maintain adsorption equilibrium, and can be reused at least 96 times. Combined with gas chromatography-tandem mass spectrometry, a sensitive method for the high-efficient enrichment (enrichment factors were 501 -7453 folds) and ultra-sensitive detection (LODs were 0.001 -0.428 pg/mL) of PCNs in environmental water was established. The enrichment factor for PCNs is significantly higher than in previous studies. This proposed method provides new technical support for the daily monitoring and risk assessment of trace PCNs in environmental water.

Preparing high-performance microspheres based on the chitosan-assisted dispersion of reduced graphene oxide in aqueous solution for bilirubin removal

The removal of excess bilirubin from blood is of great clinical importance. Reduced graphene oxide (rGO) is often used to efficiently remove bilirubin. However, thin rGO pieces tend to aggregate in the aqueous phase because they are hydrophobic. In this context, we propose an effective strategy based on the chitosan-assisted (CS-assisted) dispersion of rGO to produce high-performance bilirubin-adsorbing microspheres. CS possesses a hydrophobic CH structure, which offers strong hydrophobic interactions with rGO that assist its dispersion, and the large number of hydrophilic sites of CS increases the hydrophilicity of rGO. CS serves as a dispersant in a surfactant-like manner to achieve a homogeneous and stable CS/rGO dispersion by simply and gently stirring CS and rGO in a LiOH/KOH/urea/H2O system. Subsequently, CS/rGO hybrid microspheres were prepared by emulsification. CS ensures blood compatibility as a base material, and the entrapped rGO contributes to mechanical strength and a high adsorption capacity. The CS/rGO microspheres exhibited a high bilirubin adsorption capacity (215.56 mg/g), which is significantly higher than those of the rGO and CS microspheres. The determined mass-transfer factors revealed that the rich pores of the CS/rGO microspheres promote mass transfer during bilirubin adsorption (equilibrium is almost achieved within 30 min). The CS/rGO microspheres are promising candidates for bilirubin removal owing to a combination of high strength, blood compatibility, and high adsorption capacity.

Customizable Resilient Multifunctional Graphene Aerogels via Blend-spinning assisted Freeze Casting

Graphene aerogels have gained considerable attention due to their unique physical properties, but their poor mechanical properties and lack of functionality have hindered their advanced applications. In this study, we propose a blend-spinning-assisted freeze-casting (BSFC) strategy to incorporate particle-modified carbon fibers into graphene aerogels for mechanical strengthening and functional enhancement. This method offers a great deal of freedom in the creation of customizable multimaterial, multiscale structural graphene aerogels. For example, we fabricated silicon carbide particle modified carbon fiber reinforced graphene (SiC/CF-GA) aerogels. The resulting aerogels display excellent properties such as being ultralightweight and highly resilient and having fatigue compression resistance (1000 cycles at 50% strain). Meanwhile, enhanced resilience inspired the effective strain-sensing capabilities of SiC/CF-GA aerogels with a sensitivity of 13.8 kPa-1. The adjustable dielectric properties due to SiC particle incorporation endow the SiC/CF-GA aerogel with a broad-band (8.0 GHz) effective electromagnetic wave attenuation performance. Besides, different particles could be incorporated into graphene aerogels via the BSFC strategy, allowing for customizable designs. Moreover, multifunctionalities were demonstrated by the modified aerogels, including noise absorption, thermal insulation, fire resistance, and waterproofing, further diversifying their practicality. Hence, the BSFC strategy provides a customized solution for fabricating modified graphene aerogels for advanced functional applications.

Special Issue: Advanced Nanocomposite Materials Based on Graphene Oxide/Reduced Graphene Oxide: Potential Applications and Perspectives

In recent years, graphene oxide (GO) and reduced graphene oxide (r-GO) have received much attention as precursors of graphene-like 2D nanomaterials [...].

Modeling of Electrical Conductivity for Graphene-Filled Products Assuming Interphase, Tunneling Effect, and Filler Agglomeration Optimizing Breast Cancer Biosensors

In this study, the percolation inception, actual filler amount, and concentration of nets are expressed using the filler size and agglomeration, interphase depth, and tunneling size. A modified form of the power-law model is recommended for the conductivity of graphene-polymer products using the mentioned characteristics. The modified model is used to plot and evaluate the conductivity at dissimilar ranges of factors. In addition, the prediction results of the model are compared with the experimented values of several samples. A low percolation inception and high-volume portion of nets that improve the conductivity of nanoparticles are achieved at a low agglomeration extent, thick interphase, large aspect ratio of the nanosheets, and large tunnels. The developed equation for percolation inception accurately predicts the results assuming tunneling and interphase parts. The innovative model predicts the conductivity for the samples, demonstrating good agreement with the experimented values. This model is appropriate to improve breast cancer biosensors, because conductivity plays a key role in sensing.

Efficient Removal of Siloxane from Biogas by Using β-Cyclodextrin-Modified Reduced Graphene Oxide Aerogels

In this study, β-cyclodextrin-modified reduced graphene oxide aerogels (β-CD-rGOAs) were synthesized via a one-step hydrothermal method and were used to remove hexamethyldisiloxane (L2) from biogas. The β-CD-rGOAs were characterized by the Brunner–Emmet–Teller technique, using Fourier-transform infrared spectroscopy, Raman spectrometry, scanning electron microscopy (SEM), contact angle measurements, and X-ray diffraction. The results of the characterizations indicate that β-CD was grafted onto the surface of rGOAs as a cross-linking modifier. The β-CD-rGOA had a three-dimensional, cross-linked porous structure. The maximum breakthrough adsorption capacity of L2 on β-CD-rGOA at 273 K was 111.8 mg g⁻¹. A low inlet concentration and bed temperature facilitated the adsorption of L2. Moreover, the β-CD-rGOA was regenerated by annealing at 80 °C, which renders this a promising material for removing L2 from biogas.