Survival and Success Rates of Monolithic Zirconia Restorations Supported by Teeth and Implants in Bruxer versus Non-Bruxer Patients: A Retrospective Study

Automated Crack Detection in Monolithic Zirconia Crowns Using Acoustic Emission and Deep Learning Techniques

Monolithic zirconia (MZ) crowns are widely utilized in dental restorations, particularly for substantial tooth structure loss. Inspection, tactile, and radiographic examinations can be time-consuming and error-prone, which may delay diagnosis. Consequently, an objective, automatic, and reliable process is required for identifying dental crown defects. This study aimed to explore the potential of transforming acoustic emission (AE) signals to continuous wavelet transform (CWT), combined with Conventional Neural Network (CNN) to assist in crack detection. A new CNN image segmentation model, based on multi-class semantic segmentation using Inception-ResNet-v2, was developed. Real-time detection of AE signals under loads, which induce cracking, provided significant insights into crack formation in MZ crowns. Pencil lead breaking (PLB) was used to simulate crack propagation. The CWT and CNN models were used to automate the crack classification process. The Inception-ResNet-v2 architecture with transfer learning categorized the cracks in MZ crowns into five groups: labial, palatal, incisal, left, and right. After 2000 epochs, with a learning rate of 0.0001, the model achieved an accuracy of 99.4667%, demonstrating that deep learning significantly improved the localization of cracks in MZ crowns. This development can potentially aid dentists in clinical decision-making by facilitating the early detection and prevention of crack failures.

Cyclic fatigue of a repaired 4 YSZ ceramic: Effect of the repair protocol on the adhesive and mechanical behavior

Objective

To evaluate the effect of different surface treatments on the morphology, shear bond, and flexural fatigue strength of a repaired translucent zirconia.

Methods

Monolithic disc-shaped specimens of translucent zirconia were prepared and ground to simulate repair areas. Four groups underwent different treatments: Air-MDP (air-abrasion with alumina particles and 10-MDP primer), Si-Sil (silica-coated alumina particles with MDP-containing silane), Si-MDP (silica coating with 10-MDP primer), and Uni adhe (universal adhesive). After roughness measurements and treatments, repairs were done using resin composite. Shear bond and flexural (n = 15) fatigue tests were performed. Surface topography, interfacial analysis, fractographic, and finite element analysis were conducted.

Results

The zirconia roughness was similar between the groups, however, the surface topography was modified according to the surface treatments. Si-Sil generated higher and more stable bond strength values (20.69 MPa) between translucent zirconia and resin composite when compared to Uni adhe (15.75 MPa) considering the fatigue bond strength scenario, while it was similar to Si-MDP (17.70 MPa) and Air-MDP (18.97 MPa). Regarding the mechanical behavior, Si-Sil (680.83 MPa) also showed higher and significantly different fatigue strength when compared to Uni adhe (584.55 MPa), while both were similar to Si-MDP (634.22 MPa) and Air-MDP (641.86 MPa).

Conclusion

The association of mechanical and chemical approaches is essential for long-term bond strength and optimized mechanical behavior, being air-abrasion protocols and the use of silane and/or MDP-based primers suitable for zirconia repair protocols. It was found that relying solely on a universal adhesive was not as effective as other options available.

Clinical significance

The surface treatment of repair protocols affects translucent zirconia's morphology. To enhance fatigue behavior in repaired monolithic zirconia, air abrasion is crucial. Exclusive use of a universal adhesive is less effective than other choices. A primer containing silane/MDP holds the potential for stable bond strength and optimized mechanical performance.

Clinical outcomes of tooth-supported monolithic zirconia vs. porcelain-veneered zirconia fixed dental prosthesis, with an additional focus on the cement type: a systematic review and meta-analysis

PURPOSE

To compare the failure rates and the prevalence of technical complications between full-coverage tooth-supported monolithic zirconia (MZ) and porcelain-veneered zirconia (PVZ) fixed dental prosthesis, based on a systematic literature review.

METHODS

An electronic search was performed in three databases, supplemented by hand searching. Several statistical methods were used.

RESULTS

Seventy-four publications reported 6370 restorations (4264 PVZ; 2106 MZ; 8200 abutment teeth; 3549 patients), followed up until 152 months. A total of 216 prostheses failed, and survival was statistically significant different between groups. PVZ had higher occurrence of complications than MZ; the difference was especially greater for either minor or major chipping. The difference in prevalence of either minor or major chipping was statistically significant for PVZ prostheses between cementation with glass ionomer and adhesive resin cement (higher), adhesive resin and resin-modified glass ionomer cement (RMGIC, higher), and between RMGIC (higher) and glass ionomer cement. For MZ the difference was significant only for minor chipping between RMGIC (higher) and adhesive resin cement. Abutment teeth to PVZ prostheses more often lost vitality. Decementation was not observed with RMGIC. Air abrasion did not seem to clinically decrease the decementation risk. The 5-year difference in the occurrence of minor or major chipping between MZ and PVZ prostheses was statistically significant, but nor for catastrophic fracture.

CONCLUSION

Tooth-supported PVZ prostheses present higher failure and complication rates than MZ prosthesis. The difference in complications is striking when it comes to chipping.

CLINICAL RELEVANCE

Awareness of the outcome differences between different types of zirconia prostheses is important for clinical practice.

Clinical and cone beam computed tomography outcomes of maxillary anterior implant restorations after immediate implant placement with interim restorations: A 1- to 14-year retrospective analysis

STATEMENT OF PROBLEM: Achieving and maintaining optimal tissue health and esthetics when immediately placing maxillary anterior implants with interim restorations has been challenging and the clinical outcomes heterogenous.

PURPOSE

The purpose of this retrospective study was to evaluate the clinical outcomes of immediate placement of maxillary anterior implants with interim restorations and compare the tomographic and clinical results before and after implant placement in participants followed for 1 to 14 years.

MATERIAL AND METHODS

Twenty participants receiving 25 postextraction single implants in the anterior maxilla were studied. Clinical parameters included pink esthetic score (PES) and white esthetic score (WES), peri-implant phenotype, implant probing, plaque index, and cone beam computed tomography (CBCT) to compare initial and at least 1 year after crown placement (postoperative). For qualitative variables, a descriptive analysis was carried out. The PES and WES results were analyzed by using nonparametric statistics, the median (ME) and the interquartile range (IQR) were used as summary measures, and the Wilcoxon sum of signs test was used to compare the total scores between the intervention area and the contralateral tooth. To compare pre- and postoperative data points, the paired t test was used (α=.05).

RESULTS

Mean ±standard deviation (SD) time of follow-up was 7.6 ±4.2 years. Twenty participants with a mean ±SD age of 62.4 ±11.0 years old received 25 implants. Mean ±SD initial torque value at implant placement was 38.6 ±9.63 Ncm. Bone height at the top of the alveolar ridge (BH) and bone width at the middle of the alveolar ridge (BW2) showed a statistically significant decrease between the initial and subsequent CBCT measurements (both P<.001). Likewise, the bone width at the alveolar crest (BW1) showed a statistically significant decrease between the initial and post-CBCT measurements (P=.006). Facial bone integrity (FBI) revealed a statistically significant increase between the initial and postoperative time periods (P<.001). The PES index showed a median of 9.0 IQR (8-10), statistically lower than the contralateral tooth (P=.032). No significant differences were found for the WES index or for FBI, regardless of the peri-implant phenotype.

CONCLUSIONS

Immediate implant placement in the maxillary anterior sextant was found to be a predictable procedure with good esthetic results when the protocol described was used. Labial bone loss is inevitable after tooth extraction but can be compensated for by filling the space with a xenograft material. Long-term gingival tissue integrity was maintained, regardless of phenotype, in periodontally healthy participants.

3D-Printed Overlay Template for Diagnosis and Planning Complete Arch Implant Prostheses

Dental implants are a reliable alternative to treating edentulism. In clinical situations where the dentition has been severely affected by partial edentulism, advanced wear, or periodontal disease, establishing important occlusal elements such as the occlusal plane, incisal guidance, and esthetics can be hard to visualize at the diagnostic stage. Contemporary data-acquisition technologies such as 3D scanners and CAD/CAM systems permit the precise manufacture of highly complex devices applicable to any stage of restorative treatment. The present clinical report presents an alternative technique for evaluating the projected artificial tooth relationships, vertical dimension, and occlusal plane in patients with severely weakened dentition by using a 3D-printed overlay template.

Clinical Outcomes of Monolithic Zirconia Crowns on Posterior Natural Abutments Performed by Final Year Dental Medicine Students: A Prospective Study with a 5-Year Follow-Up

The conventional metal-ceramic is still considered the gold standard in fixed prosthetics especially in terms of longevity. Among alternative materials used, Monolithic Zirconia has shown the capability to reconcile excellent biomechanical properties with acceptable aesthetic performance and to overcome several inconveniences related to veneer restorations. This study aims to clinically evaluate Monolithic Zirconia prosthetic crowns on natural abutments in the posterior sectors, performed by final-year dental medicine students (undoubtedly with less experience in the management of such material) by the standardized California Dental Association score system evaluation, to better understand the viability of Monolithic Zirconia. This prospective study was carried out at the Dental School of the University of Bari "Aldo Moro", Italy. Prosthetic rehabilitation included single crowns or a short pontic prosthesis with maximum one intermediate. Final-year dental students performed tooth reduction under the supervision of three expert tutors. The California Dental Association systematics (based on color, surface, anatomical shape, and marginal integrity) were adopted to evaluate the prosthetic maintenance status over time. Annual follow-up visits were re-evaluated by the same parameters each year. Univariate logistic regression analysis was performed to evaluate outcomes and the Kaplan-Meier plot to report survival. The sample consists of 40 crowns performed on 31 patients, 15 males (48.4%) and 16 females (51.6%) with an average age of 59.3 years. The clinical cases subjected to experimental study were found to be "Excellent" (1a/2a/3a/4a) in 34 cases (85%), "Acceptable" in 4 cases (10%), and "To be re-done" in 2 cases (failures) (5%). Our conclusive data support the predictability of Monolithic Zirconia restorations on natural posterior abutments at a long-term follow-up of five years, even when performed by less-experienced clinicians.

Retrospective 1- to 8-Year Follow-Up Study of Complete Oral Rehabilitation Using Monolithic Zirconia Restorations with Increased Vertical Dimension of Occlusion in Patients with Bruxism

AIM

The aim of this paper is to perform a retrospective assessment of the clinical performance of the complete oral rehabilitation of patients with bruxism treated with implants and teeth-supported veneered and non-veneered monolithic zirconia restorations with increased occlusal vertical dimension.

METHODS

In this retrospective follow-up study, 16 bruxer patients, mean age 59.5 ± 14.9 years, were treated with 152 veneered and 229 non-veneered monolithic zirconia and followed for a mean of 58.8 ± 18.8 months (range 1-8 years). The patients were examined clinically and radiographically, annually. Clinical data were extracted from the medical records. In the recall appointments, modified California Dental Association (CDA) criteria were used to evaluate the restorations. Implant and restoration survival and success rates were recorded and analyzed.

RESULTS

The cumulative survival rates of implants and restorations were 97.7% and 97.6%, respectively. Nine restorations were replaced: three due to horizontal tooth fractures, two because of implant failure and four had secondary caries. A total of 43 biologic and technical complications were recorded. In the veneered group, the predominant complication was minor veneer chipping (16.4%), which required polishing only (grade 1). In the non-veneered group, the main complication was open proximal contacts between the implant restorations and adjacent teeth (14.5%).

CONCLUSIONS

The survival rates of restorations and implants in patients with bruxism are excellent, even though veneered zirconia restoration exhibited a high rate of minor veneer chipping, which required polishing only. The biologic complication of fractured single-tooth abutment may occur.

Effect of restoration material on marginal bone resorption around modified anatomic zirconia dental implants: A randomised controlled trial

Objective

The primary aim of this study was to determine the effect of implant-supported porcelain-fused-to-metal (PFM) and indirect-composite-resin (ICR) fixed dental prostheses on peri-implant marginal bone resorption (MBR) in custom-made anatomic modified zirconia dental implants.

Methods

A prospective randomized controlled clinical trial was conducted. Participants with premolars indicated for dental extractions were recruited into this study to receive a single-unit implant-supported fixed dental prosthesis. Modified anatomic zirconia implants with thorny-retentive surfaces were placed and loaded randomly after 3 months with either PFM or ICR crowns. Participants were recalled after 12 and 18 months for radiographic evaluation of peri-implant MBR. Implants survival was also reported.

Results

18 out of 20 zirconia implants were included in all study phases. 18-month survival rate was 90%. After 12 months of implant placement, the mean MBR values were 0.53 (±0.21) mm and 0.60 (±0.14) mm in the ICR group compared to 0.67 (±0.16) mm and 0.61 (±0.27) mm in the PFM group. In the 18-month follow-up, the mean MBR values were 0.61 (±0.27) and 0.67 (±0.16) mm in the ICR group compared to 0.77 (±0.29) and 0.77 (±0.27) mm in the PFM group. No significant differences were found in MBR mean values between study groups at 12- and 18-month follow-up points.

Conclusion

This study showed that PFM and ICR crowns were viable zirconia-implant-supported restorations with no preference regarding MBR after 18 months. Nevertheless, long-term evaluations are warranted.

•

Custom-made zirconia implants with new design of their macro-retentive features (thorns) were used in this clinical study.

•

They showed success rate of 90% with all failures occurred early before loading.

•

Peri-implant marginal bone resorption (MBR) ranged within acceptable values after 12 and 18 months.

•

No significant differences in MBRs were seen between implant-supported metal-ceramic and indirect composite restorations.