The Use of Chitosan and Starch-Based Flocculants for Filter Backwash Water Treatment

Micro/nanoengineered agricultural by-products for biomedical and environmental applications

Agriculturally derived by-products generated during the growth cycles of living organisms as secondary products have attracted increasing interest due to their wide range of biomedical and environmental applications. These by-products are considered promising candidates because of their unique characteristics including chemical stability, profound biocompatibility and offering a green approach by producing the least impact on the environment. Recently, micro/nanoengineering based techniques play a significant role in upgrading their utility, by controlling their structural integrity and promoting their functions at a micro and nano scale. Specifically, they can be used for biomedical applications such as tissue regeneration, drug delivery, disease diagnosis, as well as environmental applications such as filtration, bioenergy production, and the detection of environmental pollutants. This review highlights the diverse role of micro/nano-engineering techniques when applied on agricultural by-products with intriguing properties and upscaling their wide range of applications across the biomedical and environmental fields. Finally, we outline the future prospects and remarkable potential that these agricultural by-products hold in establishing a new era in the realms of biomedical science and environmental research.

Enhanced oral delivery of hesperidin-loaded sulfobutylether-β-cyclodextrin/chitosan nanoparticles for augmenting its hypoglycemic activity: in vitro-in vivo assessment study

Hesperidin (Hsd), a bioactive phytomedicine, experienced an antidiabetic activity versus both Type 1 and Type 2 Diabetes mellitus. However, its intrinsic poor solubility and bioavailability is a key challenging obstacle reflecting its oral delivery. From such perspective, the purpose of the current study was to prepare and evaluate Hsd-loaded sulfobutylether-β-cyclodextrin/chitosan nanoparticles (Hsd/CD/CS NPs) for improving the hypoglycemic activity of the orally administered Hsd. Hsd was first complexed with sulfobutylether-β-cyclodextrin (SBE-β-CD) and the complex (CX) was found to be formed with percent complexation efficiency and percent process efficiency of 50.53 ± 1.46 and 84.52 ± 3.16%, respectively. Also, solid state characterization of the complex ensured the inclusion of Hsd inside the cavity of SBE-β-CD. Then, Hsd/CD/CS NPs were prepared using the ionic gelation technique. The prepared NPs were fully characterized to select the most promising one (F1) with a homogenous particle size of 455.7 ± 9.04 nm, a positive zeta potential of + 32.28 ± 1.12 mV, and an entrapment efficiency of 77.46 ± 0.39%. The optimal formula (F1) was subjected to further investigation of in vitro release, ex vivo intestinal permeation, stability, cytotoxicity, and in vivo hypoglycemic activity. The results of the release and permeation studies of F1 manifested a modulated pattern between Hsd and CX. The preferential stability of F1 was observed at 4 ± 1 °C. Also, the biocompatibility of F1 with oral epithelial cell line (OEC) was retained up to a concentration of 100 µg/mL. After oral administration of F1, a noteworthy synergistic hypoglycemic effect was recorded with decreased blood glucose level until the end of the experiment. In conclusion, Hsd/CD/CS NPs could be regarded as a hopeful oral delivery system of Hsd with enhanced antidiabetic activity.

Methods for the separation of hydraulic retention time and solids retention time in the application of photosynthetic microorganisms in photobioreactors: a review

Photosynthetic microorganisms have a wide range of biotechnical applications, through the application of their versatile metabolisms. However, their use in industry has been extremely limited to date, partially because of the additional complexities associated with their cultivation in comparison to other organisms. Strategies and developments in photobioreactors (PBRs) designed for their culture and applications are needed to drive the field forward. One particular area which bears examination is the use of strategies to separate solid- and hydraulic-residence times (SRT and HRT), to facilitate flow-through systems and continuous processing. The aim of this review is to discuss the various types of PBRs and methods which are currently demonstrated in the literature and industry, with a focus on the separation of HRT and SRT. The use of an efficient method of biomass retention in a PBR may be advantageous as it unlocks the option for continuous operation, which may improve efficiency, and improve economic feasibility of large-scale implementation of photosynthetic biocatalysts, especially where biomass is not the primary product. Due to the underexplored nature of the separation of HRT and SRT in reactors using photosynthetic microorganisms, limited literature is available regarding their performance, efficiencies, and potential issues. This review first introduces an overview into photosynthetic microorganisms cultivated and commonly exploited for use in biotechnological applications, with reference to bioreactor considerations specific to each organism. Following this, the existing technologies used for the separation of HRT and SRT in PBRs are explored. The respective advantages and disadvantages are discussed for each PBR design, which may inform an interested bioprocess engineer.

Photochemical stability of chitosan films doped with cannabis oil

The effect of UV radiation from three different sources on chitosan (CS) films containing the addition of 10% by weight of cannabis oil was investigated. Cannabis oil (CBD) alone exposed to UV is unstable, but its photostability significantly increases in the chitosan matrix. The course of photochemical reactions, studied by FTIR spectroscopy, is slow and inefficient in chitosan with CBD, even under high-energy UV sources. The research also included chitosan films with CBD cross-linked with dialdehyde starch (DAS). Using AFM microscopy and contact angle measurements, the morphology and surface properties of prepared chitosan films with CBD were investigated, respectively. It was found that CBD embedded in CS is characterized by the best photostability under the influence of an LED emitting long-wave radiation. Using a monochromatic and polychromatic UV lamp (HPK and UV-C) emitting high-energy radiation, gradual degradation accompanied by oxidation was observed, both in the CS chains and in the CBD additive. Additionally, changes in surface properties are observed during UV irradiation. It was concluded that CS protects CBD against photodegradation, and a further improvement in photochemical stability is achieved after system cross-linking with DAS.

Recent advances on the preparation conditions, structural characteristics, physicochemical properties, functional properties and potential applications of dialdehyde starch: A review

Starch, a natural storage polysaccharide of plant kingdom, has many industrial applications. However, native starch has some inherent shortages, which can be overcome by structural modification. Dialdehyde starch, one kind of oxidized starch produced by periodate oxidation, has good physical properties and bioactivities with wide applications in different fields. Dialdehyde starch is typically achieved by oxidizing native starch slurry through periodate oxidation under controlled reaction conditions. Several factors including the source of starch, the type of oxidant, the molar ratio of oxidant to starch, reaction temperature, reaction time and solution pH value can influence the synthesis of dialdehyde starch. Dialdehyde starch shows different spectroscopic/chromatographic characters and physicochemical properties from native starch. Moreover, dialdehyde starch exhibits good antioxidant activity, antimicrobial activity and cross-linking property. Based on these functional properties, dialdehyde starch has shown application potentials in food packaging, thermoplastic production, enzyme immobilization, heavy metal ion adsorption, drug delivery, wood adhesion and leather tanning. In this review, the preparation conditions, structural characteristics, physicochemical properties, functional properties and potential applications of dialdehyde starch are summarized for the first time. The future research and development prospects of dialdehyde starch are also discussed.

TiO2 loaded on glycidol functionalized poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) nanobiocomposite film for photocatalytic and antibacterial activities

The rapid acceleration of industrialization and urbanization has exacerbated water pollution, which is primarily caused by the presence of highly toxic, non-biodegradable contaminants in industrial waste and effluents. In response to this urgent issue, a novel nanobiocomposite film with titanium dioxide (TiO2) loaded onto a poly(3-hydroxybutyrate-co-18 mol% 3-hydroxyhexanoate) (18PHBH) matrix was developed to serve as an effective dual-function material with photocatalytic and antibacterial properties. Through Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR), Diffuse reflectance ultraviolet-visible (DRUV-Vis), Scanning Electron Microscope (SEM), and X-ray diffraction (XRD) analyses, the physicochemical properties of the TiO2/Gly/18PHBH nanobiocomposite film were exhaustively characterized, revealing effective TiO2 loading and uniform distribution on the film's surface. The film exhibited extraordinary photocatalytic degradation of methylene blue (MB) dye, with the 5TiO2/Gly/18PHBH film demonstrating the greatest efficiency. In addition, antibacterial testing revealed that the film was effective against 99.8 % of Staphylococcus aureus and 96.9 % of Pseudomonas aeruginosa. These results demonstrate the potential of polyhydroxyalkanoate-based films as exceptional nanoparticle matrices and position the 5TiO2/Gly/18PHBH film as a versatile candidate for applications in photocatalysis and antibacterial interventions, providing innovative solutions to critical environmental challenges.

Removal of direct dyes from wastewater using chitosan and polyacrylamide blends

This study investigated the feasibility of employing neat chitosan powder, polyacrylamide, and chitosan micro-beads as adsorbents for the rapid and efficient removal of Direct Blue 78 dye from textile industrial wastewater. A series of batch experiments were conducted to examine the impact of adsorbent dose, contact time, and pH on the adsorption process. The physicochemical analysis, including FTIR, zeta potential analysis, and SEM were performed to identify the adsorption mechanism of chitosan powder and micro-beads. It was found that increasing the powder chitosan dose to 4.5 g/L and contact time up to 40 min resulted in achieving a significant increase in dye removal efficiency up to 94%. The highest removal efficiency of 94.2% was achieved at an initial dye concentration of 50 mg/L, a chitosan dosage of 4.5 g/L, and an optimized contact time of 60 min. Utilizing a polyacrylamide gel dose of 45 mL/L reduced the sedimentation time of chitosan from 8 h to 5 min. Equilibrium studies showed an initial L-shaped equilibrium curve, indicating that the adsorption process primarily arises from electrostatic interactions between dye molecules and adsorbent particles (physical forces). The Langmuir isothermal model demonstrated the best fit to the equilibrium data. Combining chitosan powder with polyacrylamide gel emerges as an economically viable choice for dye removal in industrial wastewater effluents, offering a cost-effective alternative to pricey commercial adsorbents. The results of the study revealed that the presence of polyacrylamide dye enhanced the removal efficiency and settling time of DB78 dye using chitosan.

The effects of pulsed electric fields treatment on the structure and physicochemical properties of dialdehyde starch

The structural and physicochemical properties changes of corn starch oxidized by sodium periodate under the assistance of pulsed electric fields (PEF) were studied. It was found that dialdehyde starch (DAS) particles produced by PEF-assisted oxidation exhibited shrinkage and pits, and had a larger particle size when compared to the control without PEF. The solubility of the DAS (12 kV/cm PEF- assisted oxidation) improved by 70.2% when compared to the native starch. Increment in the strength of the PEF, led to a decrease in the viscosity of the DAS. In addition, the aldehyde group content of the DAS produced by PEF-assisted oxidation exhibited shrinkage and pits, and had a larger particle size when compared to the control increased by 11.6% when compared with the traditional oxidation method. PEF is an effective method to promote oxidation reaction of starch.

Novel Biomass-Based Polymeric Dyes: Preparation and Performance Assessment in the Dyeing of Biomass-Derived Aldehyde-Tanned Leather

High-performance chrome-free leather production is currently one of the most concerning needs to warrant the sustainable development of the leather industry due to the serious chrome pollution. Driven by these research challenges, this work explores using biobased polymeric dyes (BPDs) based on dialdehyde starch and reactive small-molecule dye (reactive red 180, RD-180) as novel dyeing agents for leather tanned using a chrome-free, biomass-derived aldehyde tanning agent (BAT). FTIR, ¹H NMR, XPS, and UV-visible spectrometry analyses indicated that a Schiff base structure was generated between the aldehyde group of dialdehyde starch (DST) and the amino group of RD-180, resulting in the successful load of RD-180 on DST to produce BPD. The BPD could first penetrate the BAT-tanned leather efficiently and then be deposited on the leather matrix, thus exhibiting a high uptake ratio. Compared with the crust leathers prepared using a conventional anionic dye (CAD), dyeing, and RD-180 dyeing, the BPD-dyed crust leather not only had better coloring uniformity and fastness but it also showed a higher tensile strength, elongation at break, and fullness. These data suggest that BPD has the potential to be used as a novel sustainable polymeric dye for the high-performance dyeing of organically tanned chrome-free leather, which is paramount to ensuring and promoting the sustainable development of the leather industry.

Formation of disinfection by-products from microplastics, tire wear particles, and other polymer-based materials

Disinfection by-products (DBPs) are formed through the disinfection of water containing precursors such as natural organic matter or anthropogenic compounds (e.g., pharmaceuticals and pesticides). Due to the ever increasing use of plastics, elastomers, and other polymers in our daily lives, polymer-based materials (PBMs) are detected more frequently and at higher concentrations in water and wastewater. The present review provides a comprehensive and systematic analysis of the contribution of PBMs - including elastomers, tire waste, polyelectrolytes, and microplastics - as precursors of DBPs in water and wastewater. Literature shows that the presence of PBMs can lead to the leaching of dissolved organic matter (DOM) and subsequent formation of DBPs upon disinfection in aqueous media. The quantity and type of DBPs formed strongly depends on the type of polymer, its concentration, its age, water salinity, and disinfection conditions such as oxidant dosage, pH, temperature, and contact time. DOM leaching from elastomers and tire waste was shown to form N-nitrosodimethylamine up to concerning levels of 930 ng/L and 466,715 ng/L, respectively upon chemical disinfection under laboratory conditions. Polyelectrolytes can also react with chemical disinfectants to form toxic DBPs. Recent findings indicate trihalomethanes formation potential of plastics can be as high as 15,990 µg/L based on the maximum formation potential under extreme conditions. Our analysis highlights an overlooked contribution of DOM leaching from PBMs as DBP precursors during disinfection of water and wastewater. Further studies need to be conducted to ascertain the extent of this contribution in real water and wastewater treatment plants.

Recent advances in polymer composite, extraction, and their application for wastewater treatment: A review

Wastewater from diverse industrial sectors, agricultural practices and other household activities causes water pollution that result in different environmental issues. The main goals of wastewater treatment are typically to enhance the purity of wastewater and to enable the disposal of domestic and industrial effluents without endangering human health or causing excessive environmental issues. There were several natural and synthetic materials which have been utilized for wastewater treatment, amongst them polymers gain more importance due to their non-toxicity, economic feasibility, abundant availability of sources, renewability, biocompatibility, biodegradability, etc. The organic polymers such as cellulose, chitin, gelatin, alginates, lignin, dextran and other starch derivatives are the most commonly used natural polymers in wastewater treatments. The unique physical and chemical characteristics of the natural polymers make them become an alternative in wastewater treatments such as membrane filtration, adsorption, coagulation, flocculation and ion-exchange process to remove harmful contaminants such as toxic metals, dyes, medicines, pesticides, and so on. The review article discusses natural polymers and related uses in wastewater treatment. This review mainly focused on the wastewater treatment using natural polymers and the techniques involved for their extraction from natural sources. The recent trends in polymer extraction from the natural sources and the scope for the future research of natural polymers in various sectors are also discussed in detail.

Chitosan-Gelatin Films Cross-Linked with Dialdehyde Cellulose Nanocrystals as Potential Materials for Wound Dressings

In this study, thin chitosan-gelatin biofilms cross-linked with dialdehyde cellulose nanocrystals for dressing materials were received. Two types of dialdehyde cellulose nanocrystals from fiber (DNCL) and microcrystalline cellulose (DAMC) were obtained by periodate oxidation. An ATR-FTIR analysis confirmed the selective oxidation of cellulose nanocrystals with the creation of a carbonyl group at 1724 cm⁻¹. A higher degree of cross-linking was obtained in chitosan-gelatin biofilms with DNCL than with DAMC. An increasing amount of added cross-linkers resulted in a decrease in the apparent density value. The chitosan-gelatin biofilms cross-linked with DNCL exhibited a higher value of roughness parameters and antioxidant activity compared with materials cross-linked with DAMC. The cross-linking process improved the oxygen permeability and anti-inflammatory properties of both measurement series. Two samples cross-linked with DNCL achieved an ideal water vapor transition rate for wound dressings, CS-Gel with 10% and 15% addition of DNCL—8.60 and 9.60 mg/cm²/h, respectively. The swelling ability and interaction with human serum albumin (HSA) were improved for biofilms cross-linked with DAMC and DNCL. Significantly, the films cross-linked with DAMC were characterized by lower toxicity. These results confirmed that chitosan-gelatin biofilms cross-linked with DNCL and DAMC had improved properties for possible use in wound dressings.

Research on Dewatering Characteristics of Waste Slurry from Pipe Jacking Construction

A large amount of waste slurry is produced during the construction of pipe jacking projects. To avoid the waste slurry occupying too much urban land, it needs to be rapidly reduced. Due to the complex composition of waste slurry, the existing dewatering methods face the problem of low efficiency, and the soil after dewatering is difficult to recycle as soil materials due to high water content and low strength. There is currently a lack of research on dewatering and resource utilization of waste slurry from pipe jacking projects. In response to this problem, this paper studies the flocculation-settling characteristics of waste slurry and the mechanical properties of solidified sediment. It was found that the anionic polyacrylamide (APAM) 7126 obtained the best separation effect if the waste slurry contains bentonite, which increases the zeta potential, resulting in poor separation. Thus, FeCl₃·6H₂O and APAM 7126 can be used as compound conditioners. The sediment after settling was further added with 20–30% sulphate aluminum cement (SAC), and the unconfined compressive strength of the solidified sediment for 3 days could exceed 30 kPa. After flocculation-settling and solidification treatment, the waste pipe jacking slurry can be quickly dewatered into a soil material with a certain strength, which provides a reference for engineering applications.