The Effect of POFA-Gypsum Binary Mixture Replacement on the Performance of Mechanical and Microstructural Properties Enhancements of Clays

Development of Clay-Composite Plasters Integrating Industrial Waste

This research investigates the feasibility of developing clay composites using natural materials and incorporating waste by-products suitable for plastering diverse support structures. The study identified a versatile composition suitable for a wide range of support materials and explored the potential of revaluing industrial waste and by-products by reintegrating them into the Circular Economy. The experimental investigation outlines the process of evaluating the influence of different raw materials on the performance of the clay composite. The findings confirm that using limestone sludge and fly ash as additives to clay contributes to reducing axial shrinkage and increasing mechanical strengths, respectively. The optimal percentage of additives for the clay used are identified and provided. Using hydraulic lime as a partial substitute for clay reduces the apparent density of dried clay composites, axial shrinkage, and fissures formation while improving adhesion to the substrate. Introducing dextrin into this mix increases the apparent density of the hardened plaster while keeping axial shrinkage below the maximum threshold indicated by the literature. Mechanical strengths improved, and better compatibility in terms of adhesion to the support was achieved, with composition S3 presenting the best results and a smooth, fissure-free plastered surface after drying.

Recyclable Materials for Ecofriendly Technology

This Special Issue (SI), "Recyclable Materials for Ecofriendly Technology", has been proposed and organized as a means to present recent developments in the field of environmentally friendly designed construction and building materials. For this purpose, dozens of articles were included or considered for inclusion in this SI, covering various aspects of the topic. A comparison of these articles with other modern articles on this topic is carried out, which proves the prospects and relevance of this SI. Furthermore, per the editorial board's journal suggestion, the second volume of this successful SI is being organized, in which authors from various countries and organizations are invited to publish their new and unpublished research work.

Structural Formation of Soil Concretes Based on Loam and Fly Ash, Modified with a Stabilizing Polymer Additive

Finding new ways of recycling production waste to improve the characteristics of various building materials is an urgent scientific task. This article substantiates the possibility of the disposal of fly ash in the composition of soil concrete, which is used in the construction of the structural layers of road pavements, foundations of buildings and structures, as well as sites for various purposes. The scientific novelty lies in the fact that the structure formation of soil concretes based on loam and fly ash and modified with a stabilizing additive is being studied for the first time. It was found that the investigated fly ash, according to its hydraulic properties, is classified as latent active and can be introduced into the compositions of road soil concrete modified with additives of various resources. The effectiveness of the complex method of stabilization, due to changes in soil properties as a result of the use of the binding and stabilizing additives of polymer nature “Kriogelit”, is shown. It was found that the optimal content of binder and fly ash in the samples was 8 and 10 wt.%, respectively. It was established that the use of the stabilizing additive “Kriogelit” makes it possible to obtain soil concrete with the highest strength (compressive strength 2.5 MPa, flexural strength 0.5 MPa) and frost resistance of at least F15. The microstructure, the degree of dehydration and carbonization, and the phase composition of the initial raw mixtures and soil concretes stabilized with the addition of “Kriogelit” were studied by methods of scanning electron microscopy, X-ray diffraction analysis, differential scanning calorimetry, thermogravimetry, and infrared spectroscopy. It was shown that organo-mineral complexes, with the participation of polymer and montmorillonite, are formed in stabilized soil concrete. It was revealed that structure formation is accompanied by the physical adsorption of the polymer on active centers of silicate minerals, carbonization, and hydration–dehydration processes. It was found that the reason for the increase in the strength of stabilized soil concretes is the hydrophobization of the porous structure of minerals, as well as the formation of calcium oxide silicate and dicalcium hydrated silicate. By the method of performing biotests with the test objects Daphnia magna Straus and Chlorella vulgaris Beijer, it was proven that the developed road concretes modified with the stabilizing additive “Kriogelit” do not have an acute toxic effect on the test objects and are safe for the environment and human health.