Assessment of Preload Loss after Cyclic Loading in the OT Bridge System in an “All-on-Four” Rehabilitation Model in the Absence of One and Two Prosthesis Screws

Implant survival rate and marginal bone loss of 174 implants with different variables associated over a minimum observational period of 20 years: A retrospective study

PURPOSE

To investigate the long-term implant survival rate and marginal bone loss (MBL) of implants with different variables associated over an observational period of at least 20 years.

MATERIALS AND METHODS

Patients with at least one implant placed prior to 2001 were recalled and visited. Data on implant macro-design, prosthetic aspects, site distribution, and patient-related factors were collected. MBL was evaluated on intraoral X-rays and peri-implant soft tissue parameters were recorded. The patients were asked to fill out a questionnaire to evaluate their satisfaction with the treatment received. Descriptive statistics indicators were estimated. Analysis of variance and analysis of covariance models were used to investigate any differences in the MBL and peri-implant probing depth (PPD) among the variables. A chi-square analysis was performed to investigate any association between different types of prosthetic implant-supported rehabilitations and survival/success outcomes.

RESULTS

Forty-one (41) patients and 174 implants were included with a mean observational period of 23.3 ± 2.8 years. The implant survival and success rates were 96.5% and 83.3% respectively, while 3.5% of early failures were detected. The lowest success rates were observed for implants supporting fixed full-arch rehabilitations (71.05%) and overdenture rehabilitations (86.11%). A mean MBL of 1.81 ± 0.71 mm and a mean PPD of 3.38 ± 1.62 mm were recorded. The interaction between the collected data with MBL and PPD did not reveal any statistically significant differences between the variables (p > 0.05). A statistically significant difference was recorded when analyzing the association between the different types of prosthetic implant-supported rehabilitations and success rates (p = 0.014), with fixed and removable full-arch rehabilitations presenting with lower success rates. Answers to the questionnaire showed a generally high level of satisfaction.

CONCLUSIONS

Within the limits of this retrospective study and based on the results, an implant survival rate higher than 96% was observed after a mean observational period of 23.3 ± 2.8 years. Both the implant survival rate and MBL seemed stable after a mean observational period of 23.3 ± 2.8 years. Implants supporting fixed and removable full-arch rehabilitations seemed to present lower success rates over time. Implant rehabilitation seemed to provide patients with optimal long-term outcomes in terms of functional and psychological aspects.

Immediate full-arch fixed rehabilitation of a narrow mandible with newly conceived connection system implants: A case report

Rehabilitating thin jaws without reconstructive surgery entails using narrow implants. The proposed treatment adopted an innovative implant system, allowing the mini-screws to be parallel and immediately loaded. A mandible, wearing an overdenture, was functionalized contextually to the residual dental extraction and the placement of six 2.4-mm thick one-piece implants. Low-profile intermediate abutments, the LEMs, able to rotate over the spherical heads of the fixtures, were connected after suturing, oriented, and blocked in a mutual parallel position. The copings, engaging with a tapered juncture of the LEMs, resulted in their alignment to be intraorally wedged together. The provisional superstructure enclosed the copings and was immediately connected to the implants, and the definitive prosthesis was delivered after three months. No clinical signs of peri-implantitis or radiographically evident bone loss were recorded after a two-year follow-up without any prosthetic complication. No cases have been published regarding mini-implants bearing fixed prosthesis rehabilitation.

Fracture strength of 3-units fixed partial dentures fabricated with metal-ceramic, graphene doped PMMA and PMMA before and after ageing: An in-vitro study

OBJECTIVES

To evaluate the fracture strength and linear elongation at break of three-units fixed partial dentures (FPDs) fabricated with traditional and new materials for fixed prosthodontics before and after ageing.

METHODS

Sixty models of three-units FPDs were fabricated and cemented onto a Co-Cr model simulating the replacement of a maxillary second premolar. The samples were randomly divided into 3 groups: metal-ceramic (MCR), graphene-doped polymethylmethacrylate (PMMA-GR) and polymethylmethacrylate (PMMA). Half of the samples were directly subjected to fracture test, while the remaining half underwent an ageing process and then a fracture loading test using an electrodynamic testing machine. Fracture load and elongation at break values were taken and statistically analysed.

RESULTS

Significant differences were detected between the different materials (p<0.05). All groups showed a reduction of the fracture load and elongation at break values after ageing, but not statistically significant, except for PMMA group (p = 2.012e-19) (p = 3.8e-11).

CONCLUSIONS

MCR and PMMA-GR three-units FPDs showed higher fracture strength and lower elongation at break compared to PMMA. MCR and PMMA-GR had higher resistance to ageing processes compared to PMMA.

CLINICAL SIGNIFICANCE

PMMA-GR could be considered a material for long-term provisional restorations as its mechanical behaviour and ageing resistance are more like MCR than PMMA.

Rehabilitation with implant-supported overdentures in preteens patients with ectodermal dysplasia: A cohort study

INTRODUCTION

Hypohidrotic ectodermal dysplasia (HED) patients suffering of oligo-anodontia require early dental treatment to improve oral functions and reduce social impairment. The aim of this study was to evaluate the skeletal growth, implant and prosthetic survival rate, success, and complications after the rehabilitation with a maxillary denture and an implant-supported overdenture provided by a sliding bar in case of severe hypodontia/anodontia related to HED.

MATERIALS AND METHODS

This retrospective cohort study began in 2009. Nine patients over 7 years old with HED and associated oligo-anodontia who presented at the University of Bologna for dental treatment were included in the study. They were first treated with conventional dentures and then with a maxillary denture and an implant-supported overdenture with a sliding bar connected to two implants placed in the anterior mandible. The subjects treated were followed for 3-12 years. In each case, orthopanoramic and lateral cephalometric radiographic exam were taken before implant placement and annually after prosthetic load. Vertical and transverse dimensions of the mandible in the symphysis area at implant sites were taken on the lateral cephalometric radiography at the time of implant placement and after 5 years from the prosthetic loading to assess the presence or absence of an anterior mandibular growth. Biologic and mechanical complications were also recorded at every visit.

RESULTS

A mandibular vertical growth under the implant apex, at the implant neck, and a sagittal growth of the symphysis after 5 years from the prosthetic loading were observed and measured. Implant and prosthetic success and survival rates were 100% after 8.1 years (mean) follow-up period. No complications were reported except in one patient, where the repositioning of a retentive cap on the counter bar in the superstructure was necessary after 3 years from the prosthetic loading.

CONCLUSIONS

The present study suggests that the growth of the mandible near implant sites continues even after their positioning. Implants can be successfully placed and provide support for prosthetic rehabilitation in preteens patients with HED.

Evaluation of Tension and Deformation in a Mandibular Toronto Bridge Anchored on Three Fixtures Using Different Framework Materials, Abutment Systems, and Loading Conditions: A FEM Analysis

OBJECTIVE

 The aim of this study was to investigate by finite element method analysis the behaviour of a three-implant mandible Toronto framework made by three different materials, with two abutment systems and two loading conditions.

MATERIALS AND METHODS

 Three implants were virtually inserted in a mandible model in positions 3.6, 4.1, and 4.6. Three prosthetic framework bars with the same design and dimension (4.8 × 5.5 mm) were projected. The variables introduced in the computer model were the framework materials (glass fiber reinforced resin, Co-Cr, TiAl6V4), the abutment systems (Multi-Unit-Abutment [MUA]/OT-Bridge), and the loading conditions (500 N vertical load on all the framework area and 400 N on a 7-mm distal cantilever). The computer was programmed with physical properties of the materials as derived from the literature. Maximum tension and deformation values for each variable were registered at framework, screws, and abutment level and then compared.

RESULTS

 Metal frameworks Cr-Co and TiAl6V4 resulted in lower deformation than glass fiber-reinforced resin frameworks while presenting higher tension values. The OT-Bridge exhibited lower maximum tension and deformation values than the MUA system. The first loading condition reached higher tension and deformation values than the second and it resulted in more uniformly distributed load on all the framework area, especially with the OT-Bridge system.

CONCLUSION

 More rigid materials and OT-Bridge system decrease the deformation on the prosthetic components. Tension stresses are more uniformly distributed with glass fiber-reinforced resin, in the OT-Bridge system and avoiding cantilever loading.

Immediate loading full-arch rehabilitation using transmucosal tissue-level implants with different variables associated: a one-year observational study

BACKGROUND

The aim of the present observational study was to investigate the application of transmucosal tissue-level implants in immediate loading full-arch rehabilitation with different variables associated.

METHODS

Patients needing a full-arch implant rehabilitation were recruited and rehabilitated with four transmucosal tissue level implants. Data related to implants' diameters and lengths, jaw distributions, and presence of angulated abutments were collected. The following outcomes were evaluated: survival rate, marginal bone loss (MBL), Plaque Index (PI), bleeding on probing (BoP), probing depth (PD). Descriptive statistical analysis was reported and univariate linear regression models were built to assess a significant correlation between MBL and the different implant related factors.

RESULTS

Twenty patients were rehabilitated for a total implant number of 80; 11 rehabilitations were performed on the maxilla, while 9 were performed on the mandible; 48 implants presented a 3.8 mm diameter and 32 implants presented a 4.25 mm diameter. Implants length varied between 10 to 15 mm; 40 tilted implants were connected to angulated abutment, while 40 straight implants were connected directly to the prostheses (no abutments). At the one year follow-up visit no implants failed resulting in an implant survival rate of 100%. The overall MBL was 1.19±0.30 mm. No statistically significant difference (P>0.05) was highlighted among any of the subgroups analyzed.

CONCLUSIONS

Despite different variables associated, tissue level implants seem to represent a valid option when applied in immediate loading full-arch rehabilitation. Further research and longer observational periods are encouraged to confirm the result.

Evaluation of prosthetic screw loosening in all-on-four implant-supported restorations with two different connection systems

STATEMENT OF PROBLEM: The OT BRIDGE connection system can be an alternative to multiunit abutments (MUA) for patients with all-on-four implant-supported restorations. However, the amount of prosthetic screw loosening of the OT BRIDGE in comparison with the MUA used in all-on-four implant restorations is unclear.

PURPOSE

The purpose of this in vitro study was to compare the loss of removal torque in the absence of load and after dynamic cyclic loading between the 2 different connection systems: OT BRIDGE attachment and MUA used in all-on-four implant-supported restorations.

MATERIAL AND METHODS

Four dummy implants (Neobiotech Co Ltd) were inserted into an edentulous mandibular model according to the all-on-four concept. Sixteen screw-retained restorations were digitally fabricated and assigned to 2 groups: the OT BRIDGE group received 8 restorations connected with OT BRIDGE (Rhein 83 srl); the MUA group received 8 restorations connected with MUA (Neobiotech Co Ltd). Restorations were tightened to the abutments according to the manufacturers' recommendations by using a digital torque gauge. The removal torque value (RTV) was measured with the same digital torque gauge. After retightening, dynamic cyclic loading was applied by using a pneumatic custom cyclic loading machine. RTV after loading was measured with the same torque gauge. From the RTVs measured, the ratios of removal torque loss (RTL) before and after loading and the difference between before and after loading were calculated. Data were analyzed by using the independent samples t test, paired samples t test, and mixed model analysis of variance (α=.05).

RESULTS

The OT BRIDGE showed significantly higher RTL before loading ratio (%) than the MUA in anterior abutments (P=.002) and posterior abutments (P=.003), as well as significantly higher RTL after loading ratio (%) in anterior abutments (P=.02). The MUA showed significantly higher RTL difference between before and after loading ratio (%) than the OT BRIDGE in both anterior (P=.001) and posterior abutments (P<.001). In both systems, posterior abutments showed significantly higher RTL after loading ratio (%) than anterior abutments (P<.001).

CONCLUSIONS

Posterior abutments showed more prosthetic screw loosening than anterior ones in both systems. The OT BRIDGE showed higher total prosthetic screw loosening than the MUA, although this was not significant in posterior abutments after loading. However, the OT BRIDGE was less affected by cyclic loading than the MUA.

Comparison of Milled Full-Arch Implant-Supported Frameworks Realised with a Full Digital Workflow or from Conventional Impression: A Clinical Study

BACKGROUND

The aim of the present study was to investigate the accuracy of a new digital impression system, comparing it to the plaster impression technique in the realization of full-arch implant-supported metal frameworks.

METHODS

We took 11 scans (8 of the upper maxilla and 3 of the lower jaw) on a sample of nine patients previously rehabilitated with fixed full-arch screw-retained prostheses following the Columbus Bridge Protocol (CBP) with four to six implants (total: 51) since at least 4 months. Two impressions were taken for each dental arch: one analogic plaster impression using pick-up copings and an open tray technique and a second one using an intra-oral scanner. Two milled metal substructures were realised. The precision and passivity of the substructures were clinically analysed through the Sheffield test and endo-oral radiographs. Laboratory scans of the plaster casts obtained from an intra-oral scanner (IOS) and of the plaster casts obtained from traditional impression were compared with the intraoral scans following Hausdorff's method and an industrial digital method of optical detection to measure discrepancies. A Mann-Whitney test was performed in order to investigate average distances between surfaces after the superposition.

RESULTS

The Sheffield test demonstrated an excellent passivity of the frameworks obtained through both the digital and the analogic method. In 81.81% of cases (n = 9) both substructures were found to have a perfect fit with excellent passivity, while in 18.18% (n = 2) of cases the substructures were found to have a very slight discrepancy. From the radiographic examination, no gaps between the frameworks and the implant heads or multiunit abutments were observed, with 100% accuracy. By superimposing digital files of scans according to Hausdorff's method, a statistically significant discrepancy (p = 0.006) was found between the digital scans and the digital models obtained from plaster impressions. Three-dimensional optical detection found a mean discrepancy of 0.11 mm between the analogic cast and the cast derived from the digital impression.

CONCLUSIONS

The present study clinically demonstrates that milled implant-supported full-arch frameworks obtained through a digital scan and the herein described technique have an accuracy comparable to those obtained with traditional plaster impression.

Can Abutment with Novel Superlattice CrN/NbN Coatings Influence Peri-Implant Tissue Health and Implant Survival Rate Compared to Machined Abutment? 6-Month Results from a Multi-Center Split-Mouth Randomized Control Trial

Background: The aim of the present multi-center split-mouth randomized control trial was to investigate the effect on peri-implant tissue of abutment with chromium nitride/ niobium nitride (CrN/NbN) coatings (superlattice) compared to traditional machined surface. Methods: Two adjacent posterior implants were inserted in 20 patients. A machined abutment was randomly screwed on either the mesial or distal implant, while a superlattice abutment was screwed on the other one. Implant survival rate, peri-implant probing depth (PPD), plaque index (PI), and bleeding index (BI) were collected 6 months after surgery, while marginal bone loss (MBL) was evaluated at T0 and T6.; Results: Implant survival rate was 97.7%. A total MBL of 0.77 ± 0.50 mm was recorded for superlattice abutments, while a mean MBL of 0.79 ± 0.40 mm was recorded for the abutment with machined surface. A mean PPD of 1.3 ± 0.23 mm was recorded for the superlattice Group, and a mean PPD of 1.31 ± 0.3 was recorded for the machined surface Group. PI was of 0.55 ± 0.51 for superlattice Group and 0.57 ± 0.50 for machined Group, while BI was of 0.47 ± 0.49 for superlattice Group and of 0.46 ± 0.40 for the machined one. No statistically significant difference was highlighted between the two Groups (p > 0.05). Conclusions: After a 6-month observational period, no statistically significant differences were highlighted between superlattice abutment and traditional machined abutment. Further in vitro studies as well as clinical research with longer follow-ups are required to better investigate the surface properties of the novel abutments’ superlattice coating and its effect on the oral tissues.

Evaluation of Load Distribution in a Mandibular Model with Four Implants Depending on the Number of Prosthetic Screws Used for OT-Bridge System: A Finite Element Analysis (FEA)

In full-arch implant rehabilitations, when the anterior screw abutment channel compromises the aesthetic of the patient, the OT-Bridge system used with its Seeger rings may provide the necessary retention of the prosthesis. However, no studies have evaluated the forces generated at the Seeger level during loading. This Finite Element Analysis aims to investigate the mechanical behavior of Seeger rings in a mandibular model with four implants and an OT-Bridge system, used without one or two anterior prosthetic screws. A 400 N unilateral load was virtually applied on a 7 mm distal cantilever. Two different variables were considered: the constraint conditions using two or three screws instead of four and the three different framework materials (fiberglass reinforced resin, cobalt-chrome, TiAl6V4). The FEA analysis exhibited tensile and compressive forces on the Seeger closest to the loading point. With the resin framework, a tension force on abutment 3.3 generates a displacement from 5 to 10 times greater than that respectively expressed in metal framework materials. In a full-arch rehabilitation with four implants, the case with three prosthetic screws seems to be a safer and more predictable configuration instead of two. Considering the stress value exhibited and the mechanical properties of the Seeger, the presence of only two prosthetic screws could lead to permanent deformation of the Seeger in the screwless abutment closest to the loading point.

Symmetry and Asymmetry of the Antegonial Notch

The symmetry of a human organism’s structure is an expression of the general law of development regarding organic life. Assessing the symmetry of the face and its individual components is one of the most important factors when it comes to the overall assessment of a patient’s stomatognathic system and is essential in the planning of orthodontic and prosthetic treatment. The aim of this study is to assess the symmetry of the occurrence and the measurement parameters of the pre-angular notch of the mandible. The study included computed tomography scans of 187 patients who all exhibited a visible pre-angular notch in the mandible. There was a noticeable and measurable asymmetry in the length of the angle of the notches as well as in the area of the notch angles. The differentiation of the right- and left-side measurements points to the existence of a fluctuating asymmetry. Other measurements which describe the pre-angular notch of the lower jaw do not show asymmetry.

Full-Arch Rehabilitation Using Trans-Mucosal Tissue-Level Implants with and without Implant-Abutment Units: A Case Report

Recently, tissue-level implants with a convergent collar have been introduced. While different studies have investigated the outcomes of this implant design in the rehabilitation of single teeth, its use in full-arch rehabilitation has yet to be investigated. The present case report describes the clinical outcomes of a full-arch immediate loading rehabilitation using tissue-level implants, with and without using implant-abutment units, with 2 years of follow-up. A female patient with mandibular terminal dentition and a high level of bone resorption (distal areas with a few millimeters of residual bone in the vertical dimension and both distal and anterior areas with narrow crestal bone in the horizontal dimension) was seen at the C.I.R Dental School, Turin, Italy. The patient was seeking to be rehabilitated with fixed prosthodontics, and she was found eligible for an immediate loading implant full-arch rehabilitation. Four implants were inserted in the same appointment. The two anterior implants were inserted straight and connected directly to the prosthesis (no abutments); the two distal implants were tilted in order to avoid the alveolar nerve and connected to two 30° angulated abutments. Two years post-implant placement, all of the implants were successfully integrated, resulting in an implant survival rate of 100%. The peri-implant soft tissues were stable at all the implant sites. No differences were highlighted between those implants with and without abutments. Within the limitations of the present clinical report, implant full-arch rehabilitations with tissue-level implants both with and without implant-abutment units showed optimal outcomes after two years of follow-up. Further research is encouraged to confirm whether this implant design may be a valid alternative to traditional implants in this type of rehabilitation, with or without implant-abutment units.

Clinical and Radiographic Evaluation of a Novel Triangular Implant Neck Design: A Case Series

The objective of this study was to evaluate the clinical and radiographic behavior of a novel triangular neck implant configuration in partially edentulous patients. Sixteen patients with a mean age of 58.3 years, were rehabilitated with 25 implants inserted in the healed sites of the maxilla and mandible; implant diameter was Ø3.3 and 3.9 mm. Clinical and radiographic measurements were first performed at prosthesis delivery that served as baseline; they were further evaluated after a mean period of 15.6 months. The interproximal peri-implant bone levels were the primary outcome; the mesial and distal data were recorded and a mean value was calculated. Secondary outcomes included peri-implant probing depth (PPD) and bleeding on probing (BoP). The paired t-test was used to compare the radiographic and clinical outcomes between baseline and follow-up. The mean bone levels at the mesial and distal aspects at baseline were 0.45 (0.47) and 0.57 (0.69), respectively; at follow-up they were 0.59 (0.42) and 0.78 (0.59), respectively. The differences were not statistically significant. Similarly, no significant differences were found for the clinical parameters. Within the limitations of the present study, it could be concluded that this new triangular neck bone level implant macro-design was used successfully to treat partially edentulous patients. Larger controlled clinical studies are warranted to confirm the present radiographic and clinical findings.

Clinical Performance Comparing Titanium and Titanium–Zirconium or Zirconia Dental Implants: A Systematic Review of Randomized Controlled Trials

Objectives: This study aimed to compare clinical results between titanium (Ti), zirconia (Zr), or titanium–zirconium (TZ) dental implants and to analyze survival rate (SR), bleeding on probing (BoP), marginal bone loss (MBL), and/or probing depth (PD). Data source: Manual and electronic searches were conducted (PubMed and Web of Science) to identify randomized controlled trials that compared the outcomes of at least two implant types (control and test group) within the same study. The focused question was determined according to the PICOT strategy. Seven studies were included out of 202 research studies initially found. The follow-up periods ranged from 12 to 80 months, and the mean age was from 43.3 to 65.8 years old. The SR for Ti, TZ, and Zr implants ranged from 92.6% to 100%, 95.8% to 100%, and 87.5% to 91.25%, respectively; MBL for Ti, TZ, and Zr implants varied from −1.17 mm to −0.125 mm for Ti, −0.6 mm to −0.32 mm for TZ, and −0.25 mm to −1.38 mm for Zr. Studies showed a low incidence of mucositis and peri-implantitis; however, BoP for Zr was 16.43%, Ti ranged between 10% and 20%, and TZ from 10% to 13.8%. PD for Ti ranged from 1.6 mm to 3.05 mm, TZ was 3.12 mm (only one study), and Zr ranged from 2.21 mm to 2.6 mm. Conclusion: All three types of implants showed similar tissue behavior. However, the TZ group had better results when compared with Ti and Zr for SR, MBL, and BoP, except for PD. Furthermore, the worst SR was found in the Zr implants group.

Full Digital Workflow for Prosthetic Full-Arch Immediate Loading Rehabilitation Using OT-Bridge System: A Case Report

Nowadays, digital technologies have brought very important advancements in clinical prosthetic dentistry. However, a full digital workflow is still considered to be challenging in the management of full-arch implant cases with immediate prosthetic loading. The aim of this case report is to show a full-digital workflow for the fabrication of an implant-prosthetic fixed provisional prosthesis for immediate loading on seven implants in the upper maxilla. The static guided implant surgery and the OT Bridge prosthetic system were used to rehabilitate the patient. In this way, the combination of a well-known surgical technique with a peculiar prosthetic system that allows for a certain degree of tolerance resulted in it being useful for full-arch immediate loading. Future research and studies are necessary to prove the reliability of this full-digital protocol.

Patients with Thyroid Disorder, a Contraindication for Dental Implants? A Systematic Review

The thyroid gland is composed of the thyroid follicles, considered to be the functional units of the thyroid gland. The synthesis of the thyroid hormones occurs in these follicles. Triiodothyronine (T3) and thyroxine (T4) are the thyroid hormones and affect metabolic processes all through the body. This systematic evaluation was performed to answer the following PICO question: “Can patients with thyroid disorders undergo dental implant rehabilitation with the same survival rate as patients without thyroid disorders?”. A systematic review of the literature was conducted following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statements to gather available and current evidence of thyroid disorders and its relationship with dental implants. The electronic search, in the PubMed and Cochrane databases, yielded 22 articles. Out of the 22 articles, only 11 fulfilled the inclusion criteria. Manual research of the reference list yielded no additional papers. According to the SORT criteria and answering our PICO question, level B can be established to conclude that patients with thyroid disorders can be rehabilitated with dental implants, with similar survival rates as patients without thyroid disorders. Papers with higher scientific evidence and bigger sample size should be carried out.