Anaerobic Reactor Filling for Phosphorus Removal by Metal Dissolution Method

Environmentally-Friendly Materials in Wastewater Treatment

The intensive development of industry and agriculture caused by high population growth results in the release of large volumes of wastewater containing organic and inorganic pollutants into the environment [...].

Performance of an Innovative Low-Cost Recycled Filling (LCRF) in Anaerobic Treatment of Dairy Effluent-A Pilot-Scale Study

The rapid growth in dairy production leads to increasing outputs of high-load effluent, necessitating new methods of treating such waste. Anaerobic processes have been increasingly popular but are hamstrung by limited nutrient removal efficiency. The aim of the present study was to investigate whether low-cost recycled filling (LCRF) improves the anaerobic treatment of dairy effluent. The addition of LCRF was found to increase both COD removal (86.1 ± 2.6%-92.8 ± 1.6%) and P_tot. removal (22.1 ± 3.5% to 36.9 ± 4.6%) from the wastewater. The LCRF ensured near-neutral pH and stabilized the structure of the anaerobic microbe community (including Archaea) across all pollutant loads tested. This translated to efficient biogas production and high methane content in the LCRF reactors, peaking at 0.35 ± 0.01 m³/kg COD_removed and 68.2 ± 0.6% (respectively) in the best-performing variant.

Performance evaluation of a full-scale upflow anaerobic sludge blanket reactor coupled with trickling filters for municipal wastewater treatment in a developing country

Poor wastewater management remains a critical health and environmental challenge in most developing countries in Sub-Saharan Africa due to the lack of adequate infrastructure for collection and treatment. This study evaluated the performance and methane production of a full-scale upflow anaerobic sludge blanket (UASB) reactor of capacity 18000 m³/d, with post-treatment unit: trickling filters followed by final settling tanks for municipal wastewater treatment in Ghana. Data was collected on operational conditions and physicochemical parameters of wastewater (influent and effluent) over a period of 35 weeks in 2021 (from January to August). The influent biochemical oxygen demand to chemical oxygen demand (BOD:COD) ratio was 0.58 ± 0.16, indicating the presence of highly biodegradable compounds in the sewage. Operational conditions for the UASB reactors were observed to be within the optimal range for anaerobic systems, with an applied organic loading rate of 1.30 ± 0.79 kgCOD/m³/d. Generally, Plant performance was satisfactory with carbon removal at 93% for COD and 98% for BOD. Biogas yield was 0.2 m³/kgCOD removed, culminating in an average biogas production rate of 831.6 ± 292.7 m³/d. Average methane composition was 64.7 ± 11.9% of the biogas output, whilst an estimated 35% of the methane generated remained dissolved in the UASB effluent. The UASB reactor presents an efficient technology that can be implemented in developing countries for effective and sustainable wastewater management.