In Vitro Studies for Investigating Creep of Intervertebral Discs under Axial Compression: A Review of Testing Environment and Results

Mechanical characterization of a novel biomimetic artificial disc for the cervical spine

A novel biomimetic artificial intervertebral disc (bioAID) replacement implant has been developed containing a swelling hydrogel representing the nucleus pulposus, a tensile strong fiber jacket as annulus fibrosus and titanium endplates with pins to primarily secure the device between the vertebral bodies. In this study, the design safety of this novel implant was evaluated based on several biomechanical parameters, namely compressive strength, shear-compressive strength, risk of subsidence and device expulsion as well as identifying the diurnal creep-recovery characteristics of the device. The bioAID remained intact up to 1 kN under static axial compression and only 0.4 mm of translation was observed under a compressive shear load of 20 N. No subsidence was observed after 0.5 million cycles of sinusoidal compressive loading between 50 and 225 N. After applying 400 N in antero-posterior direction under 100 N axial compressive preload, approximately 2 mm displacement was found, being within the range of displacements reported for other commercially available cervical disc replacement devices. The diurnal creep recovery behavior of the bioAID closely resembled what has been reported for natural intervertebral discs in literature. Overall, these results indicate that the current design can withstand (shear-compression loads and is able to remain fixed in a mechanical design resembling the vertebral bodies. Moreover, it is one of the first implants that can closely mimic the poroelastic and viscoelastic behavior of natural disc under a diurnal loading pattern.

Effects of whole-body vibration at different periods on lumbar vertebrae in female rats

The current study aimed to investigate the effects of whole-body vibration (WBV) before and after ovariectomy on lumbar vertebrae, and to observe whether the positive effects of WBV before and after ovariectomy on lumbar vertebrae in rats could be maintained after vibration stopped. Three-month-old female rats were divided into four groups (n = 45/group): control (CON), ovariectomy (OVA), WBV before ovariectomy (WBV-BO), and WBV after ovariectomy (WBV-AO) groups. For 1-8 weeks, WBV-BO group was subjected to vertical WBV. At the 9th week, the rats in WBV-BO, WBV-AO, and OVA groups were ovariectomized. During 11-18 weeks, WBV-AO group was subjected to vibration. For 19-26 weeks, no intervention was done for rats. The lumbar vertebrae were examined by Micro-CT, compressive test, creep test, and microindentation test. At the 8th week, the displacement of the L1-L2 annulus fibrosus in WBV-BO group was 18% smaller compared with CON group (p<0.05). At the 18th week, the elastic modulus of the L5 vertebral body in WBV-BO and WBV-AO groups was 53% and 57% higher than that in CON group, respectively (p<0.05); the displacement of the L1-L2 annulus fibrosus in WBV-BO group was 25% smaller than those in the other groups (p<0.05). At the 26th week, there was no significant difference in the displacement of the L1-L2 annulus fibrosus between WBV-BO group and other groups (p>0.05); the elastic modulus of the L5 vertebral body had no significant difference between WBV-AO group and CON group (p>0.05). Our results demonstrated that WBV before ovariectomy effectively prevented disc degeneration with significant effects up to 8 weeks after ovariectomy. The vertebral mechanical properties could be significantly improved by WBV after ovariectomy, but the residual effect did not maintain after WBV stopped.

Mitophagy—A New Target of Bone Disease

Bone diseases are usually caused by abnormal metabolism and death of cells in bones, including osteoblasts, osteoclasts, osteocytes, chondrocytes, and bone marrow mesenchymal stem cells. Mitochondrial dysfunction, as an important cause of abnormal cell metabolism, is widely involved in the occurrence and progression of multiple bone diseases, including osteoarthritis, intervertebral disc degeneration, osteoporosis, and osteosarcoma. As selective mitochondrial autophagy for damaged or dysfunctional mitochondria, mitophagy is closely related to mitochondrial quality control and homeostasis. Accumulating evidence suggests that mitophagy plays an important regulatory role in bone disease, indicating that regulating the level of mitophagy may be a new strategy for bone-related diseases. Therefore, by reviewing the relevant literature in recent years, this paper reviews the potential mechanism of mitophagy in bone-related diseases, including osteoarthritis, intervertebral disc degeneration, osteoporosis, and osteosarcoma, to provide a theoretical basis for the related research of mitophagy in bone diseases.

The Radial Bulging and Axial Strains of Intervertebral Discs during Creep Obtained with the 3D-DIC System

Creep-associated changes in disc bulging and axial strains are essential for the research and development of mechano-bionic biomaterials and have been assessed in various ways in ex vivo creep studies. Nonetheless, the reported methods for measurement were limited by location inaccuracy, a lack of synchronousness, and destructiveness. To this end, this study focuses on the accurate, synchronous, and noninvasive assessment of bugling and strains using the 3D digital image correlation (3D-DIC) system and the impact of creep on them. After a preload of 30 min, the porcine cervical discs were loaded with different loads for 4 h of creep. Axial strains and lateral bulging of three locations on the discs were synchronously measured. The three-parameter solid model and the newly proposed horizontal asymptote models were used to fit the acquired data. The results showed that the load application reduced disc strains by 6.39% under 300 N, 11.28% under 400 N, and 12.59% under 500 N. Meanwhile, the largest protrusion occurred in the middle of discs with a bugling of 1.50 mm, 1.67 mm, and 1.87 mm. Comparison of the peer results showed that the 3D-DIC system could be used in ex vivo biomechanical studies with reliability and had potential in the assessment of the mechanical behavior of novel biomaterials. The phenomenon of the largest middle protrusion enlightened further the strength of spinal implants in this area. The mathematical characterizations of bulging and strains under different loads yielded various model parameters, which are prerequisites for developing implanted biomaterials.