Adhesive Joints of Additively Manufactured Adherends: Ultrasonic Evaluation of Adhesion Strength

Prediction of phase composition and mechanical properties Fe-Cr-C-B-Ti-Cu hardfacing alloys: Modeling and experimental Validations

Alloys of the Fe-Cr-C-B-Ti alloy system are characterized by brittleness, which can be eliminated by the copper alloy, while corrosion resistance and abrasive wear resistance are significantly reduced. In this article, comprehensive investigations are carried out on the microstructure and mechanical properties of the proposed high-copper boron-containing alloy 110Cr4Cu7Ti1VB. Systematic theoretical and experimental studies encompassed thermodynamic calculations in ThermoCALC, production of flux-cored wires for hardfacing and welding, receipt of SEM images, acquisition of load and unload diagrams (discharge) via instrumental indentation on various phases of the deposited metal, and determination of chemical composition at indentation points through local chemical analysis. Mechanical properties of some phases such as γ-Fe phase (austenite), hemioboride Fe2(В,С) and boron cementite Fe3(В,С) and titanium carbide TiC in Fe-Cr-C-B-Ti-Сг alloy were determined by using density functional theory (DFT) implemented in the CASTEP code. We also compared these compounds; properties with other available commercial compounds, where available. With the knowledge of calculated elastic constants, the moduli, the Pugh's modulus ratio G/B, the Poisson's ratio v and the hardness of the title phases, 110Cr4Cu7Ti1VB were further predicted and discussed.

Ultrasonic Features for Evaluation of Adhesive Joints: A Comparative Study of Interface Defects

Ultrasonic non-destructive evaluation in pulse-echo mode is used for the inspection of single-lap aluminum adhesive joints, which contain interface defects in bonding area. The aim of the research is to increase the probability of defect detection in addition to ensuring that the defect sizes are accurately estimated. To achieve this, this study explores additional ultrasonic features (not only amplitude) that could provide more accurate information about the quality of the structure and the presence of interface defects. In this work, two types of interface defects, namely inclusions and delaminations, were studied based on the extracted ultrasonic features in order to evaluate the expected feasibility of defect detection and the evaluation of its performance. In addition, an analysis of multiple interface reflections, which have been proved to improve detection in our previous works, was applied along with the extraction of various ultrasonic features, since it can increase the probability of defect detection. The ultrasonic features with the best performance for each defect type were identified and a comparative analysis was carried out, showing that it is more challenging to size inclusion-type defects compared to delaminations. The best performance is observed for the features such as peak-to-peak amplitude, ratio coefficients, absolute energy, absolute time of flight, mean value of the amplitude, standard deviation value, and variation coefficient for both types of defects. The maximum relative error of the defect size compared to the real one for these features is 16.9% for inclusions and 3.6% for delaminations, with minimum errors of 11.4% and 2.2%, respectively. In addition, it was determined that analysis of the data from repetitive reflections from the sample interface, namely, the aluminum-adhesive second and third reflections, that these contribute to an increase in the probability of defect detection.