Investigation of the Efficiency of Shielding Gamma and Electron Radiation Using Glasses Based on TeO2-WO3-Bi2O3-MoO3-SiO to Protect Electronic Circuits from the Negative Effects of Ionizing Radiation

Mechanical properties, elastic moduli, and gamma ray attenuation competencies of some TeO2–WO3–GdF3 glasses: Tailoring WO3–GdF3 substitution toward optimum behavioral state range

We report the mechanical properties, elastic moduli, and gamma ray attenuation properties of some TeO2–WO3–GdF3 glasses. Using the chemical composition of the selected glasses, the dissociation energy per unit volume (G t ) and the packing density (V t ) were calculated. Using the G t and V t values, Young’s, Shear, Bulk, Longitudinal Modulus, and Poisson’s ratio of the glasses are calculated. Next several fundamental gamma ray attenuation properties such as linear and mass attenuation coefficients, half value layer, mean free path, effective atomic number, effective electron density, effective conductivity, exposure, and energy absorption buildup factors are calculated in 0.015–15 MeV energy range. As a consequence of WO3–GdF3 substitution, the glass densities are observed in different values. The overall gamma ray attenuation properties are found to be enhanced through WO3 addition. Moreover, the increasing WO3 incorporation into glass configuration decreases the overall elastic moduli of glasses. It can be concluded that increasing WO3 may be a useful tool for enhancing the gamma ray attenuation qualities and decreasing the elastic moduli of TeO2–WO3–GdF3 in situations where a material with versatile mechanical properties is required.

Solid Electrolyte Membranes Based on Li2O-Al2O3-GeO2-SiO2-P2O5 Glasses for All-Solid State Batteries

Rechargeable Li-metal/Li-ion all-solid-state batteries due to their high safety levels and high energy densities are in great demand for different applications ranging from portable electronic devices to energy storage systems, especially for the production of electric vehicles. The Li_1.5Al_0.5Ge_1.5(PO₄)₃ (LAGP) solid electrolyte remains highly attractive because of its high ionic conductivity at room temperature, and thermal stability and chemical compatibility with electrode materials. The possibility of LAGP production by the glass-ceramic method makes it possible to achieve higher total lithium-ion conductivity and a compact microstructure of the electrolyte membrane compared to the ceramic one. Therefore, the crystallization kinetics investigations of the initial glass are of great practical importance. The present study is devoted to the parent glasses for the production of Li_1.5+xAl_0.5Ge_1.5Si_xP_3-xO₁₂ glass-ceramics. The glass transition temperature T_g is determined by DSC and dilatometry. It is found that T_g decreases from 523.4 (x = 0) to 460 °C (x = 0.5). The thermal stability of glasses increases from 111.1 (x = 0) to 188.9 °C (x = 0.3). The crystallization activation energy of Si-doped glasses calculated by the Kissinger model is lower compared to that of Si-free glasses, so glass-ceramics can be produced at lower temperatures. The conductivity of the glasses increases with the growth of x content.

Phase Formation, Mechanical Strength, and Bioactive Properties of Lithium Disilicate Glass-Ceramics with Different Al2O3 Contents

Owing to its excellent mechanical properties and aesthetic tooth-like appearance, lithium disilicate glass-ceramic is more attractive as a crown for dental restorations. In this study, lithium disilicate glass-ceramics were prepared from SiO₂-Li₂O-K₂O-P₂O₅-CeO₂ glass systems with various Al₂O₃ contents. The mixed glass was then heat-treated at 600 °C and 800 °C for 2 h to form glass-ceramic samples. Phase formation, microstructure, mechanical properties and bioactivity were investigated. The phase formation analysis confirmed the presence of Li₂Si₂O₅ in all the samples. The glass-ceramic sample with an Al₂O₃ content of 1 wt% showed rod-like Li₂Si₂O₅ crystals that could contribute to the delay in crack propagation and demonstrated the highest mechanical properties. Surface treatment with hydrofluoric acid followed by a silane-coupling agent provided the highest micro-shear bond strength for all ceramic conditions, with no significant difference between ceramic samples. The biocompatibility tests of the material showed that Al₂O₃-added lithium disilicate glass-ceramic sample was bioactive, thus activating protein production and stimulating the alkaline phosphatase (ALP) activity of osteoblast-like cells.